Jump to content

update-7546.pkg


Guest spences10

Recommended Posts

Guest mzsigler
It certainly is specific! Yet doesn't tell me if flash 10 works or not!!

Full flash 10.1? Still froyo only as far as I know, so no, since this an eclair build.

Link to comment
Share on other sites

I unyaffs'ed both a 6941 system.img and a 7546 system.img and ran a diff --recursive, here's what's different, in very specific terms, lol

http://pastebin.com/n7L9x455

rofl, I was going to do the same thing when I got to work..

just sat down to check, now I'm here and read you'd done it already :huh:

Link to comment
Share on other sites

Guest mzsigler
rofl, I was going to do the same thing when I got to work..

just sat down to check, now I'm here and read you'd done it already :huh:

lol, I'm a noob here, figure I should contribute something

Link to comment
Share on other sites

lol, I'm a noob here, figure I should contribute something

seems strange there's no quickoffice if its a final build,

Greenarches did you take out that and the RSS and touchdown?

anything else you cleaned if so? ]

wiper? mminfo?

or weren't they in this one?

LOL I'm that sad that I like to look at the changes before I even flash it..

Link to comment
Share on other sites

Guest Paul Brown

Thanks very much for the Nandroid! Just flashed it to my streak and all appears good!

Just wondering though, do we need to flash this new Recovery.img to our streaks too?

Link to comment
Share on other sites

Guest mzsigler
Thanks very much for the Nandroid! Just flashed it to my streak and all appears good!

Just wondering though, do we need to flash this new Recovery.img to our streaks too?

I didn't see any reason to, so I didn't.

edit - actually you do need to reflash the recovery, I'll edit my prior post.

Edited by mzsigler
Link to comment
Share on other sites

Guest mzsigler
#

< ro.build.oemversion.main=GAUSB1A120421

#

---

#

> ro.build.oemversion.main=GAUSB1A120321

Is this a problem?

I don't see any problems so far.

Link to comment
Share on other sites

Guest Paul Brown

Only problem i've seen on mine is the home and other 2 buttons are flashing then going off after a short while.

Any idea why this is happening?

Link to comment
Share on other sites

Only problem i've seen on mine is the home and other 2 buttons are flashing then going off after a short while.

Any idea why this is happening?

you haven't changed anything and you flashed all three partitions?

Link to comment
Share on other sites

Guest jamezwarner

OK seems sucessful, however all my old apps are still there - is this expected? My back/home/menu keys also seem to like flashing, especially during boot...

Link to comment
Share on other sites

Guest mzsigler
Only problem i've seen on mine is the home and other 2 buttons are flashing then going off after a short while.

Any idea why this is happening?

Just happened on mine, and it doesn't show anything in logcat at all.

Link to comment
Share on other sites

Guest Paul Brown
you haven't changed anything and you flashed all three partitions?

i followed the instructions that you posted on page 5, went into fastboot and flashed System and Boot.

Seems after a while, they flash and go off, but when i lock the screen and unlock it again, they turn on again?

Link to comment
Share on other sites

Guest mzsigler
OK seems sucessful, however all my old apps are still there - is this expected? My back/home/menu keys also seem to like flashing, especially during boot...

Yeah, your data should be there, you didn't wipe/flash data

Link to comment
Share on other sites

Guest jamezwarner

Everything still seems OK, facebook contacts bug appears to still be present, though my screen switches off properly when locked now (so far!)

Link to comment
Share on other sites

Guest mzsigler
if you're getting flashing buttons then try a factory reset or dalvik-cache wipe?

Still haven't flashed it :huh:

Are you sure we aren't related?

Looks like you have to redo the fix to keep 2.1 from writing over clockwork recovery, I'm doing that right now so I can wipe dalvik, lol.

Wait, we can't be related, I'm not a sissy that's waiting to flash it ;)

Link to comment
Share on other sites

Guest Paul Brown

Tried a factory reset, it's still happening. I'm debating whether to try and flash the recovery. Flashing recovery wont have any effect on updating in the future will it?

I've not tried a Dalvik-Cache wipe yet.

Link to comment
Share on other sites

nandroid restore deletes the partitions first, before maybe we should do that?

fastboot erase boot

fastboot erase recovery

fastboot flash system system.img

fastboot flash boot boot.img

fastboot flash userdata data.img ***Ignore as we don't have it***

fastboot flash recovery recovery.img

fastboot reboot

dalvik cache is in the /data so I presume it would get wiped during factory restore.

Edited by fards
Link to comment
Share on other sites

Guest jamezwarner

I have flashed all 3 and still have the flashing button issue, it seems to only do it after being idle for a period - or after changing the brightness (the buttons light up to show how bright they are during adjustment and then flash before turning off again)

Can the original submitter confirm this behaviour on the "originally" updated phone?

Fixes:

no auto lock on phonecall finish

new green spectrum graphic behind android logo during call

James

Edited by jamezwarner
Link to comment
Share on other sites

Guest Paul Brown

I can't do an erase it seems, all i get when i type fastboot erase boot is: < Waiting for device >

Never had it come up before, confusing stuff

Link to comment
Share on other sites

Guest mzsigler
I can't do an erase it seems, all i get when i type fastboot erase boot is: < Waiting for device >

Never had it come up before, confusing stuff

try fastboot -i 0x413c erase *whatever*

Edited by mzsigler
Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.