help me in Flashing Custom rom

[Guest reinPnoy]

i have followed these steps:(read it somewhere here :P)

i'm using Vista 32 bit in my laptop

Flashing ROM using Octan's

Intro:

First of all, I'm not responsible for any damage/error's appearing after flashing. You can always ask help here in the forums if you need to.

Second, I didn't create the software used for flashing. All credits will be in the guide.

Step 1: Getting the files needed

First, we should need the following files:

Samsung CDMA Driver - I INSTALLED THIS ON MY LAPTOP

OCTAN's downloader - I USED OCTANS DOWNLOADER v.2.14

You can find the ROM's over here in the B7610 Collection Thread

Step 2: Preparing the device

Before flashing a ROM, you should know that EVERYTHING will be removed from your device.

The SIM / Storage Card should be left untouched, but to be 100% sure you should remove them.

Device / My Storage will be completely wiped clean.

Note: If you need to flash on Windows Vista / Windows 7 you should check the following guide for step 2.

Otherwise, just turn off the phone.

Step 3: Starting OCTAN's Downloader

As we just downloaded the file, you should open it up.

Note: If you are flashing on Windows Vista / Windows 7, you should start OCTAN's using 'Windows XP Service Pack 2' compatibility mode.

- I CHECKED THE COMPATIBILITY MODE

As OCTAN's has started, we can now set the files we would like to update.

As it's 100% safe to only update the PDA part, I recommend only flashing this one if you're unexperienced.

To select the file, click 'PDA' and select the NB0 file containing the ROM file.

Step 4: Update the ROM

We now set the files we want to be updated.

In OCTAN's, click 'DETECT'.

Next, hook up the phone using the USB cable. THE PHONE MUST BE TURNED OFF!

As soon as OCTAN's detects the phone, click the 'START' button.

Updating will now begin.

Step 5: During update

Do not remove the usb connection during updating!

You will see the process on the screen of your phone during the update.

After the 'downloading' is completed, the phone will ask you which language you'd like to use.

I can't make screenshots of this, but I hope the text will help you out!

As you can see on the screen, you can select the language.

The 'marker' will auto-change position if you wait, just click the 'Menu button' (large button below the screen), when the correct language is selected.

You will be asked to confirm, just repeat the steps above.

After some time, the phone will boot, reboot and boot again.

That's it! smile.gif

Hope it helped you out!

- IN THE OCTANS DOWNLOADER I BROWSED THE .NBO IN THE PDA SECTION AND THAT'S ALL I CHANGED IN THE OCTANS DOWNLOADER AND THEN I HIT DETECT (In this instruction in what i understand that's the only thing you need to change..if not, please help me what else to browse/change in the OCTANS DOWNLOADER screen) THEN I PLUGGED IN MY B7610 TURNED OFF(it's now charging)

and then it shows these:

[setup] Windows XP

[setup] Download Ram Size :41777920 bytes,(39 MB)

OnDeviceChange \\?\USB#VID_04E8&PID_6619#5&b66ba99&0&2#{25dbce51-6c8f-4a72-8a6d-b54c2b4fc835}

PLEASE HELP ME..

Edited September 7, 2010 by reinPnoy

[Guest daskalos]

if Octans successfully detects device you can hit "start"

I suggest you use Octans Mini, it's much simpler

[Guest reinPnoy]

if Octans successfully detects device you can hit "start"

I suggest you use Octans Mini, it's much simpler

thank you sir Daskalos.. i'm going to flash your latest GA rom.. :P

More Power SIR DASKALOS!!