Guest matiu2 Posted October 5, 2010 Report Share Posted October 5, 2010 Great job Paul, hope we will see soon the new Sense HD on your ROM! ;) Someone could tell me what is the best kernel for this ROM? :) Link to comment Share on other sites More sharing options...
Guest mtlguyinto Posted October 6, 2010 Report Share Posted October 6, 2010 Love the modifications. Finally was able to get more memory for my programs using the A2SD ad-on. I am a new Root user for my Nexus One and i am learning lots from your site. Thanks for all your hard work, keep up the good work. Looking forward to the new updates. -------------------------------------------------------- Nexus One Bell Canada Toronto, Ontario Link to comment Share on other sites More sharing options...
Guest Naji Posted October 7, 2010 Report Share Posted October 7, 2010 there is no Arabic support and hope that will be in future Link to comment Share on other sites More sharing options...
Guest kartouche Posted October 7, 2010 Report Share Posted October 7, 2010 Good news for R25. But on r24 i've got a problem. I was on R24 with no problem, then i switched on MIUI a couple of weeks to try it and now i'm back on R24 (not a back up, new flash with new baked rom), sometimes my device won't wake up. any idea ? Thanks Link to comment Share on other sites More sharing options...
Guest Toni Lähdekorpi Posted October 7, 2010 Report Share Posted October 7, 2010 (edited) Good news for R25. But on r24 i've got a problem. I was on R24 with no problem, then i switched on MIUI a couple of weeks to try it and now i'm back on R24 (not a back up, new flash with new baked rom), sometimes my device won't wake up. any idea ? Thanks That's actually caused by the Kernel. You've got three options: either wait for the next version, downgrade to a working version or install intersectRaven's latest Kernel over your rom http://forum.xda-developers.com/showthread.php?t=653598 Edited October 7, 2010 by Toni Lähdekorpi Link to comment Share on other sites More sharing options...
Guest matiu2 Posted October 7, 2010 Report Share Posted October 7, 2010 That's actually caused by the Kernel. You've got three options: either wait for the next version, downgrade to a working version or install intersectRaven's latest Kernel over your rom http://forum.xda-developers.com/showthread.php?t=653598 Could you give me a download link to the best kernel for this ROM? Link to comment Share on other sites More sharing options...
Guest Toni Lähdekorpi Posted October 7, 2010 Report Share Posted October 7, 2010 Could you give me a download link to the best kernel for this ROM? I'm using http://www.mediafire.com/?acm42n3567zjdo7 Before flashing, remember to push the bcm4329.ko file manually to /system/lib/modules to get wlan working. just ./adb push whereyouextractedthezipandlocatedthefile/bcm4329.ko /system/lib/modules/ Link to comment Share on other sites More sharing options...
Guest negreenfield Posted October 7, 2010 Report Share Posted October 7, 2010 (edited) Awesome news, Paul. If there's anything I can do to help, please let me know. I'll help any way I can. I've noticed that with the release of Car Home in the Android Market, that its having the same problem with eViL's Desire HD ROM that we are having with it here with your Desire ROM - The app doesn't see the BT hardware in the Car Dock and won't pair/use it. Have you had any luck moving forward on that front? Anything I can help you with on the testing side of things?? Desk dock same issue. I can do the same and help on the desk dock. This is still a feature I really wish would get working is that bluetooth connection to both the desk and car docks. Edited October 7, 2010 by negreenfield Link to comment Share on other sites More sharing options...
Guest Shahz Posted October 7, 2010 Report Share Posted October 7, 2010 Guys, the SMS can't send after 160 chars? Anyone found the fix so far? Link to comment Share on other sites More sharing options...
Guest matiu2 Posted October 7, 2010 Report Share Posted October 7, 2010 I'm using http://www.mediafire.com/?acm42n3567zjdo7 Before flashing, remember to push the bcm4329.ko file manually to /system/lib/modules to get wlan working. just ./adb push whereyouextractedthezipandlocatedthefile/bcm4329.ko /system/lib/modules/ Thank for the help however I've put th bcm4329.ko file in tools directory and made this command line: ./adb push bcm4329.ko /system/lib/modules/ but it gives an error (device not found)... Link to comment Share on other sites More sharing options...
Guest ~Tito~ Posted October 8, 2010 Report Share Posted October 8, 2010 Paul have you found a fix for the BT issue? That is really important to be able to use the play and play/pause button. Link to comment Share on other sites More sharing options...
Guest James Chim Posted October 8, 2010 Report Share Posted October 8, 2010 Do have a HTC CIME with handwrite ?? Link to comment Share on other sites More sharing options...
Guest vanessa13006 Posted October 8, 2010 Report Share Posted October 8, 2010 ;) I'm going to move r24 to the 'current release' (with prebakes) and create r25 WIP! I'm still working on porting over some bits of the HD ROM without using the whole base (which is huge)... I'll also updating to all of the latest Desire release, together with bits of FRG83. P I'm waiting for this update like when I was a child, ok I know it was a long time ago :), I was waiting christmas day. Link to comment Share on other sites More sharing options...
Guest damniatx Posted October 8, 2010 Report Share Posted October 8, 2010 Can someone tell me, why i cant use portable hotspot feature ? Link to comment Share on other sites More sharing options...
Guest Toni Lähdekorpi Posted October 8, 2010 Report Share Posted October 8, 2010 Thank for the help however I've put th bcm4329.ko file in tools directory and made this command line: ./adb push bcm4329.ko /system/lib/modules/ but it gives an error (device not found)... That's most likely because you haven't enabled USB debugging from your phones settings. Link to comment Share on other sites More sharing options...
Guest matiu2 Posted October 8, 2010 Report Share Posted October 8, 2010 That's most likely because you haven't enabled USB debugging from your phones settings. USB debugging is active, same error, device not found... Link to comment Share on other sites More sharing options...
Guest matiu2 Posted October 8, 2010 Report Share Posted October 8, 2010 Ok, terminal returns me this after push the bmc4329.ko file: Android Debug Bridge version 1.0.26 -d - directs command to the only connected USB device returns an error if more than one USB device is present. -e - directs command to the only running emulator. returns an error if more than one emulator is running. -s <serial number> - directs command to the USB device or emulator with the given serial number. Overrides ANDROID_SERIAL environment variable. -p <product name or path> - simple product name like 'sooner', or a relative/absolute path to a product out directory like 'out/target/product/sooner'. If -p is not specified, the ANDROID_PRODUCT_OUT environment variable is used, which must be an absolute path. devices - list all connected devices connect <host>[:<port>] - connect to a device via TCP/IP Port 5555 is used by default if no port number is specified. disconnect [<host>[:<port>]] - disconnect from a TCP/IP device. Port 5555 is used by default if no port number is specified. Using this ocmmand with no additional arguments will disconnect from all connected TCP/IP devices. device commands: adb push <local> <remote> - copy file/dir to device adb pull <remote> [<local>] - copy file/dir from device adb sync [ <directory> ] - copy host->device only if changed (-l means list but don't copy) (see 'adb help all') adb shell - run remote shell interactively adb shell <command> - run remote shell command adb emu <command> - run emulator console command adb logcat [ <filter-spec> ] - View device log adb forward <local> <remote> - forward socket connections forward specs are one of: tcp:<port> localabstract:<unix domain socket name> localreserved:<unix domain socket name> localfilesystem:<unix domain socket name> dev:<character device name> jdwp:<process pid> (remote only) adb jdwp - list PIDs of processes hosting a JDWP transport adb install [-l] [-r] [-s] <file> - push this package file to the device and install it ('-l' means forward-lock the app) ('-r' means reinstall the app, keeping its data) ('-s' means install on SD card instead of internal storage) adb uninstall [-k] <package> - remove this app package from the device ('-k' means keep the data and cache directories) adb bugreport - return all information from the device that should be included in a bug report. adb help - show this help message adb version - show version num DATAOPTS: (no option) - don't touch the data partition -w - wipe the data partition -d - flash the data partition scripting: adb wait-for-device - block until device is online adb start-server - ensure that there is a server running adb kill-server - kill the server if it is running adb get-state - prints: offline | bootloader | device adb get-serialno - prints: <serial-number> adb status-window - continuously print device status for a specified device adb remount - remounts the /system partition on the device read-write adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program adb reboot-bootloader - reboots the device into the bootloader adb root - restarts the adbd daemon with root permissions adb usb - restarts the adbd daemon listening on USB adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port networking: adb ppp <tty> [parameters] - Run PPP over USB. Note: you should not automatically start a PPP connection. <tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1 [parameters] - Eg. defaultroute debug dump local notty usepeerdns adb sync notes: adb sync [ <directory> ] <localdir> can be interpreted in several ways: - If <directory> is not specified, both /system and /data partitions will be updated. - If it is "system" or "data", only the corresponding partition is updated. environmental variables: ADB_TRACE - Print debug information. A comma separated list of the following values 1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given. ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed. MacBook-di-Mattia-Montevecchi:tools parchitalia$ However wifi doesn't work... Link to comment Share on other sites More sharing options...
Guest ~Tito~ Posted October 8, 2010 Report Share Posted October 8, 2010 Ok, terminal returns me this after push the bmc4329.ko file: Android Debug Bridge version 1.0.26 -d - directs command to the only connected USB device returns an error if more than one USB device is present. -e - directs command to the only running emulator. returns an error if more than one emulator is running. -s <serial number> - directs command to the USB device or emulator with the given serial number. Overrides ANDROID_SERIAL environment variable. -p <product name or path> - simple product name like 'sooner', or a relative/absolute path to a product out directory like 'out/target/product/sooner'. If -p is not specified, the ANDROID_PRODUCT_OUT environment variable is used, which must be an absolute path. devices - list all connected devices connect <host>[:<port>] - connect to a device via TCP/IP Port 5555 is used by default if no port number is specified. disconnect [<host>[:<port>]] - disconnect from a TCP/IP device. Port 5555 is used by default if no port number is specified. Using this ocmmand with no additional arguments will disconnect from all connected TCP/IP devices. device commands: adb push <local> <remote> - copy file/dir to device adb pull <remote> [<local>] - copy file/dir from device adb sync [ <directory> ] - copy host->device only if changed (-l means list but don't copy) (see 'adb help all') adb shell - run remote shell interactively adb shell <command> - run remote shell command adb emu <command> - run emulator console command adb logcat [ <filter-spec> ] - View device log adb forward <local> <remote> - forward socket connections forward specs are one of: tcp:<port> localabstract:<unix domain socket name> localreserved:<unix domain socket name> localfilesystem:<unix domain socket name> dev:<character device name> jdwp:<process pid> (remote only) adb jdwp - list PIDs of processes hosting a JDWP transport adb install [-l] [-r] [-s] <file> - push this package file to the device and install it ('-l' means forward-lock the app) ('-r' means reinstall the app, keeping its data) ('-s' means install on SD card instead of internal storage) adb uninstall [-k] <package> - remove this app package from the device ('-k' means keep the data and cache directories) adb bugreport - return all information from the device that should be included in a bug report. adb help - show this help message adb version - show version num DATAOPTS: (no option) - don't touch the data partition -w - wipe the data partition -d - flash the data partition scripting: adb wait-for-device - block until device is online adb start-server - ensure that there is a server running adb kill-server - kill the server if it is running adb get-state - prints: offline | bootloader | device adb get-serialno - prints: <serial-number> adb status-window - continuously print device status for a specified device adb remount - remounts the /system partition on the device read-write adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program adb reboot-bootloader - reboots the device into the bootloader adb root - restarts the adbd daemon with root permissions adb usb - restarts the adbd daemon listening on USB adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port networking: adb ppp <tty> [parameters] - Run PPP over USB. Note: you should not automatically start a PPP connection. <tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1 [parameters] - Eg. defaultroute debug dump local notty usepeerdns adb sync notes: adb sync [ <directory> ] <localdir> can be interpreted in several ways: - If <directory> is not specified, both /system and /data partitions will be updated. - If it is "system" or "data", only the corresponding partition is updated. environmental variables: ADB_TRACE - Print debug information. A comma separated list of the following values 1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given. ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed. MacBook-di-Mattia-Montevecchi:tools parchitalia$ However wifi doesn't work... Anything that you want to push has to be in the /android-sdk-windows/tools and that has to be on the root of your HDD. That is standard for adb to output when you have a command wrong. Link to comment Share on other sites More sharing options...
Guest Nerds 2 You Posted October 8, 2010 Report Share Posted October 8, 2010 Can someone tell me, why i cant use portable hotspot feature ? It's a bug, it was resolved somewhere in this thread, you should be able to find is by searching. The fix involves updating with a .zip file and it does work but I found that you still have to manually set a channel and it seems to crash and reboot your phone once when you do that, but it works after the reboot. If you switch to a different channel it will crash and reboot again. Link to comment Share on other sites More sharing options...
Guest Nerds 2 You Posted October 8, 2010 Report Share Posted October 8, 2010 I am having the same issue of Gmail only syncing the first account that I create, or rather not syncing the Gmail account. \ I have solved this issue on my phone I did a complete wipe including dalvic cache and started from scratch. When the setup wizard came up I did NOT set up any accounts this time and just went through to the end of the wizard then re-booted the phone. When the phone came back online I added my primary account (my google apps account) and made sure it worked. I then added the Gmail account, opened Gmail, went back to accounts screen to enable sync, then reboot again I then added my 3rd account, another google apps account. All my mail now comes through and syncs automatically. There used to be an easier way to solve this by going into the Apps Manager and finding "Gmail Storage" and clearing the data, but I no longer find that listed in the applications. Link to comment Share on other sites More sharing options...
Guest ZeeDD Posted October 9, 2010 Report Share Posted October 9, 2010 (edited) USB debugging is active, same error, device not found... You need to install the windows phone drivers included in Google SDK. I've attached these drivers for Intel X86 processors. DD.usb_driver.rar Edited October 9, 2010 by ZeeDD Link to comment Share on other sites More sharing options...
Guest matiu2 Posted October 9, 2010 Report Share Posted October 9, 2010 You need to install the windows phone drivers included in Google SDK. I've attached these drivers for Intel X86 processors. DD. I'm on mac OSX, where I have to put these files? Link to comment Share on other sites More sharing options...
Guest Posted October 9, 2010 Report Share Posted October 9, 2010 I'm on mac OSX, where I have to put these files? No need to put any of those files in OS X... Link to comment Share on other sites More sharing options...
Guest Big-A-Rob Posted October 9, 2010 Report Share Posted October 9, 2010 Quick question about this kernel. Is it overclocked for the Nexus One? If not, is there any issues with flashing an overclocked kernel and running this ROM? I just installed this ROM and reinstalled SetCPU and it has the max showing as 528 MHz??? Link to comment Share on other sites More sharing options...
Guest matiu2 Posted October 9, 2010 Report Share Posted October 9, 2010 No need to put any of those files in OS X... So why terminal get me "error device"? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now