Guest Frankish Posted October 11, 2010 Report Posted October 11, 2010 This is a repost from over at XDA. Just wondering if anyone can spot what's wrong with this output from logcat causing the camera to not work. 10-11 04:47:29.054: WARN/HTCCamera(1817): onCreate() 10-11 04:47:29.105: WARN/IntentManager(1817): from class: com.android.camera.CameraEntry 10-11 04:47:29.105: WARN/IntentManager(1817): mRequestMode = RequestMode.Main, from Camera 10-11 04:47:29.105: WARN/IntentManager(1817): request name = null - RequestName.Unknown_General 10-11 04:47:29.105: WARN/IntentManager(1817): extras == null 10-11 04:47:29.105: VERBOSE/CameraThread(1817): *************************************** run 10-11 04:47:29.134: WARN/HTCCamera(1817): onStart() - start 10-11 04:47:29.134: WARN/HTCCamera(1817): onStart() - end 10-11 04:47:29.134: WARN/HTCCamera(1817): onResume() - start 10-11 04:47:29.144: WARN/HTCCamera(1817): !!!! @@@@ broadcastStopVoiceRecording() - start 10-11 04:47:29.144: WARN/HTCCamera(1817): !!!! @@@@ broadcastStopVoiceRecording() - end 10-11 04:47:29.144: VERBOSE/HTCCamera(1817): !!!! @@@@ broadcastStopFM() - start 10-11 04:47:29.144: VERBOSE/HTCCamera(1817): !!!! @@@@ broadcastStopFM() - end 10-11 04:47:29.144: VERBOSE/HTCCamera(1817): Initial Display Orientation: 0 10-11 04:47:29.154: DEBUG/Sensors(425): open_akm, fd=40 10-11 04:47:29.154: DEBUG/AK8973(254): Compass Start 10-11 04:47:29.154: VERBOSE/SensorHandler(1817): createFocusFile() - start 10-11 04:47:29.154: WARN/HTCCamera(1817): OnResume - reset UI, immediately set mMainLayout invisible 10-11 04:47:29.154: VERBOSE/HTCCamera(1817): setMaxBrightness() 10-11 04:47:29.165: WARN/########## HtcSettingsReceiver ##########(1817): 2010-10-11 04:47:29 168(ms) onReceive-start 10-11 04:47:29.174: WARN/HTCCamera(1817): Block Capture UI - onResume(), and unblock after start preview 10-11 04:47:29.184: WARN/HTCCamera(1817): onResume() - mFocusingState = NO_FOCUSING 10-11 04:47:29.184: WARN/HTCCamera(1817): keyguard is not shown !!!!! 10-11 04:47:29.184: WARN/HTCCamera(1817): OnResume - set mWaitResetSettings to true 10-11 04:47:29.184: WARN/HTCCamera(1817): onResume() - end 10-11 04:47:29.244: DEBUG/PowerManagerService(425): New lightsensor value:40, lcdValue:81 10-11 04:47:29.244: DEBUG/PowerManagerService(425): lightSensorChangedLocked, buttonValue >= 0, mPowerState = 3 10-11 04:47:29.274: WARN/HTCCamera(1817): $$$$$$$$$$$$$$$$$$$$$$$$$$$$$ surfaceCreated $$$$$$$$$$$$$$$$$$$$$$$$$$$android.view.SurfaceView$3@478a03f8 10-11 04:47:29.274: WARN/HTCCamera(1817): $$$$$$$$$$$$$$$$$$$$$$$$$$$$$ surfaceCreated $$$$$$$$$$$$$$$$$$$$$$$$$$$ start preview 10-11 04:47:29.274: WARN/HTCCamera(1817): $$$$$$$$$$$$$$$$$$$$$$$$$$$$$ surfaceChanged $$$$$$$$$$$$$$$$$$$$$$$$$$$ w=480 h=800 10-11 04:47:29.274: WARN/CameraThread(1817): CameraHandler Message - START_PREVIEW start mode0 10-11 04:47:29.274: VERBOSE/CameraThread(1817): start_preview() - start 10-11 04:47:29.274: ERROR/CameraThread(1817): open the Camera in start_camera_preview 10-11 04:47:29.274: WARN/CameraSwitch(1817): open main camera 10-11 04:47:29.274: WARN/CameraSwitch(1817): no file - can't switch camera 10-11 04:47:29.294: DEBUG/QualcommCameraHardware(249): createInstance: E 10-11 04:47:29.294: DEBUG/QualcommCameraHardware(249): Storing the current target type as 1 10-11 04:47:29.294: DEBUG/QualcommCameraHardware(249): constructor EX 10-11 04:47:29.294: DEBUG/QualcommCameraHardware(249): startCamera E 10-11 04:47:29.294: INFO/ActivityManager(425): Displayed activity com.android.camera/.CameraEntry: 481 ms (total 481 ms) 10-11 04:47:29.305: DEBUG/QualcommCameraHardware(249): loading liboemcamera at 0xb00110c4 10-11 04:47:29.305: INFO/QualcommCameraHardware(249): Set main cam and main cam only 10-11 04:47:29.305: INFO/mm-camera-mmap(249): set sensor selection :0 10-11 04:47:29.305: VERBOSE/WindowManager(425): Remove Window{47d4cec8 Starting com.android.camera paused=false}: mSurface=Surface(name=Starting com.android.camera, identity=19) mExiting=false isAnimating=false app-animation=null inPendingTransaction=false mDisplayFrozen=false 10-11 04:47:29.315: ERROR/WindowManager(425): return in removeWindowLocked 10-11 04:47:29.465: INFO/QualcommCameraHardware(249): Open Device node : /dev/msm_camera/control0 10-11 04:47:29.465: INFO/mm-camera-config(249): cam_conf fd cfgctrl.camfd:0 10-11 04:47:29.465: INFO/mm-camera-config(249): Open config device node : /dev/msm_camera/config0 10-11 04:47:29.474: INFO/(249): [AWB Calibration]:ctrlfd:18 10-11 04:47:29.494: INFO/(249): [AWB Calibration] cfg.fuse_id_word1:0x0 10-11 04:47:29.494: INFO/(249): [AWB Calibration] cfg.fuse_id_word2:0x3 10-11 04:47:29.494: INFO/(249): [AWB Calibration] cfg.fuse_id_word3:0x45002 10-11 04:47:29.494: INFO/(249): [AWB Calibration] cfg.fuse_id_word4:0x27d532 10-11 04:47:29.505: DEBUG/mm-camera-s5k3e2fx_u(249): lcd type = 0 10-11 04:47:29.514: INFO/(249): [AWB Calibration] rg_ratio_GS_table[0]:0.733340 10-11 04:47:29.514: INFO/(249): [AWB Calibration] rg_ratio_GS_table[1]:0.733340 10-11 04:47:29.514: INFO/(249): [AWB Calibration] rg_ratio_GS_table[2]:0.754883 10-11 04:47:29.514: INFO/(249): [AWB Calibration] bg_ratio_GS_table[0]:0.601600 10-11 04:47:29.514: INFO/(249): [AWB Calibration] bg_ratio_GS_table[1]:0.601600 10-11 04:47:29.514: INFO/(249): [AWB Calibration] bg_ratio_GS_table[2]:0.598633 10-11 04:47:29.514: INFO/(249): [AWB Calibration] sfuse.fuse_id_word1:0x0 10-11 04:47:29.514: INFO/(249): [AWB Calibration] sfuse.fuse_id_word2:0x3 10-11 04:47:29.514: INFO/(249): [AWB Calibration] sfuse.fuse_id_word3:0x45002 10-11 04:47:29.514: INFO/(249): [AWB Calibration] sfuse.fuse_id_word4:0x27d532 10-11 04:47:29.514: INFO/(249): [AWB Calibration] fuse_id : 0x0, 0x3, 0x45002, 0x27d532 10-11 04:47:29.514: INFO/(249): [AWB Calibration] fail to read /data/awb_cal 10-11 04:47:29.514: INFO/(249): [AWB Calibration] read from file OK: /sys/android_camera_awb_cal/awb_ca 10-11 04:47:29.514: INFO/(249): [AWB Calibration] read all c1b ,ok=1 10-11 04:47:29.514: INFO/(249): [AWB Calibration] read all 320 ,ok=1 10-11 04:47:29.514: INFO/(249): [AWB Calibration] read all 253 ,ok=1 10-11 04:47:29.514: INFO/(249): [AWB Calibration] read all 0 ,ok=1 10-11 04:47:29.514: INFO/(249): [AWB Calibration] read all 3 ,ok=1 10-11 04:47:29.514: INFO/(249): [AWB Calibration] read all 45002 ,ok=1 10-11 04:47:29.514: INFO/(249): [AWB Calibration] read all 27d532 ,ok=1 10-11 04:47:29.514: INFO/(249): [AWB Calibration] read all b7a70f27 ,ok=1 10-11 04:47:29.514: INFO/(249): [AWB Calibration] check sum=b7a70f27, OK 10-11 04:47:29.514: INFO/(249): [AWB Calibration] caBuff[0]:0x00000c1b 10-11 04:47:29.514: INFO/(249): [AWB Calibration] caBuff[1]:0x00000320 10-11 04:47:29.514: INFO/(249): [AWB Calibration] caBuff[2]:0x00000253 10-11 04:47:29.514: INFO/(249): [AWB Calibration] caBuff[3]:0x00000000 10-11 04:47:29.514: INFO/(249): [AWB Calibration] caBuff[4]:0x00000003 10-11 04:47:29.514: INFO/(249): [AWB Calibration] caBuff[5]:0x00045002 10-11 04:47:29.514: INFO/(249): [AWB Calibration] caBuff[6]:0x0027d532 10-11 04:47:29.514: INFO/(249): [AWB Calibration] caBuff[7]:0xb7a70f27 10-11 04:47:29.514: INFO/(249): [AWB Calibration] fuse_id_word1:0x00000000 10-11 04:47:29.514: INFO/(249): [AWB Calibration] fuse_id_word2:0x00000003 10-11 04:47:29.514: INFO/(249): [AWB Calibration] fuse_id_word3:0x00045002 10-11 04:47:29.514: INFO/(249): [AWB Calibration] fuse_id_word4:0x0027d532 10-11 04:47:29.514: INFO/(249): [AWB Calibration] caBuff[0]:3099 10-11 04:47:29.514: INFO/(249): [AWB Calibration] valid bit and fuseID pass, use new white points 10-11 04:47:29.514: INFO/(249): [AWB Calibration] use light version: v3 10-11 04:47:29.544: INFO/mm-camera-aec(249): Touch AEC == numRegions:256 10-11 04:47:29.544: INFO/mm-camera-aec(249): Touch AEC aecCtrl->aec_state.aec_algo:1 10-11 04:47:29.555: INFO/QualcommCameraHardware(249): startCamera: camsensor name s5k3e2fx, flash 1 10-11 04:47:29.555: DEBUG/QualcommCameraHardware(249): startCamera X 10-11 04:47:29.555: DEBUG/QualcommCameraHardware(249): initDefaultParameters E 10-11 04:47:29.555: DEBUG/QualcommCameraHardware(249): product 4 10-11 04:47:29.555: DEBUG/QualcommCameraHardware(249): native_access_parm: fd 17, type 1, length 32 10-11 04:47:29.555: ERROR/QualcommCameraHardware(249): native_access_parm: error (No such file or directory): fd 17, type 1, length 32, status 0 10-11 04:47:29.555: DEBUG/QualcommCameraHardware(249): native_access_parm: fd 17, type 64, length 4 10-11 04:47:29.555: DEBUG/QualcommCameraHardware(249): native_access_parm: fd 17, type 65, length 4 10-11 04:47:29.555: DEBUG/QualcommCameraHardware(249): native_access_parm: fd 17, type 66, length 4 10-11 04:47:29.555: DEBUG/QualcommCameraHardware(249): requested preview size 768 x 432 10-11 04:47:29.555: DEBUG/QualcommCameraHardware(249): requested picture size 1024 x 768 10-11 04:47:29.565: DEBUG/QualcommCameraHardware(249): value:21401, country value:214, country code:214 10-11 04:47:29.565: DEBUG/QualcommCameraHardware(249): native_access_parm: fd 17, type 21, length 4 10-11 04:47:29.565: DEBUG/QualcommCameraHardware(249): native_access_parm: fd 17, type 14, length 4 10-11 04:47:29.565: DEBUG/QualcommCameraHardware(249): setFlash 0 10-11 04:47:29.565: DEBUG/QualcommCameraHardware(249): native_access_parm: fd 17, type 49, length 4 10-11 04:47:29.565: DEBUG/mm-camera-ctrlcmd(249): In config_proc_CAMERA_SET_PARM_LED_MODE: 0 10-11 04:47:29.565: INFO/QualcommCameraHardware(249): Set zoom=0 20 10-11 04:47:29.565: DEBUG/QualcommCameraHardware(249): native_access_parm: fd 17, type 2, length 4 10-11 04:47:29.565: INFO/QualcommCameraHardware(249): Setting Contrast is 5 10-11 04:47:29.565: DEBUG/QualcommCameraHardware(249): native_access_parm: fd 17, type 6, length 4 10-11 04:47:29.565: INFO/QualcommCameraHardware(249): Setting Brightness is 3 10-11 04:47:29.565: DEBUG/QualcommCameraHardware(249): native_access_parm: fd 17, type 7, length 4 10-11 04:47:29.565: DEBUG/QualcommCameraHardware(249): native_access_parm: fd 17, type 12, length 4 10-11 04:47:29.565: INFO/mm-camera-ctrlcmd(249): md.d.aec_mode.aec_mode:1 10-11 04:47:29.565: INFO/mm-camera-aec(249): Touch AEC == numRegions:256 10-11 04:47:29.565: INFO/mm-camera-aec(249): Touch AEC aecCtrl->aec_state.aec_algo:1 10-11 04:47:29.565: DEBUG/QualcommCameraHardware(249): not defined touch-focus yet, or AP without touch-focus function 10-11 04:47:29.565: INFO/QualcommCameraHardware(249): Before Setting coordinate x:384 y:216 10-11 04:47:29.565: INFO/QualcommCameraHardware(249): Setting coordinate x:2 y:2 10-11 04:47:29.565: DEBUG/QualcommCameraHardware(249): native_access_parm: fd 17, type 60, length 28 10-11 04:47:29.575: INFO/mm-camera 8x vfe(249): vfe_set_coordinate x:2 y:2 10-11 04:47:29.575: DEBUG/QualcommCameraHardware(249): native_access_parm: fd 17, type 26, length 4 10-11 04:47:29.575: DEBUG/mm-camera-ctrlcmd(249): md.d.aec_iso_mode = 0 10-11 04:47:29.575: DEBUG/QualcommCameraHardware(249): native_access_parm: fd 17, type 62, length 4 10-11 04:47:29.575: DEBUG/QualcommCameraHardware(249): native_access_parm: fd 17, type 8, length 4 10-11 04:47:29.575: DEBUG/QualcommCameraHardware(249): virtual android::status_t android::QualcommCameraHardware::setParameters(const android::CameraParameters&), final_rc=0 10-11 04:47:29.575: DEBUG/QualcommCameraHardware(249): initDefaultParameters X 10-11 04:47:29.575: DEBUG/QualcommCameraHardware(249): createInstance: X created hardware=0x167f0 10-11 04:47:29.575: DEBUG/MediaPlayerService(249): player type = VORBIS_PLAYER 10-11 04:47:29.584: DEBUG/MediaPlayerService(249): player type = VORBIS_PLAYER 10-11 04:47:29.595: WARN/CameraThread(1817): Open Camera - set mIsLastCameraClosed to false 10-11 04:47:32.289: WARN/HTCCamera(1817): Unknown orientation !!!
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now