Guest joestone Posted October 23, 2010 Report Posted October 23, 2010 (edited) How the script works : It copies the contents of the selected folders to the sd ext2 partition . It does not removes the copied files from the phone , because in the case of sd failure or sd removal the phone will be able to bootup. The removal process removes the files and directories needed to app2sd operate normally , but leaves the ext2 untouched. To use it you need to turn on the USB Debugging mode on the phone .Create the ext2 if not exists .The first partitition should be FAT if your card is smaller than 4GB and should be FAT32 if bigger than 4 GB. The second partition should be ext2. Both partition must be primary. Dont forget to restart the phone and turn off mass storage mode after creation of the ext2.Download the zip file , extract it and run autorootapp2sd.bat on your pc. You can use app2sd even if your phone is not rooted. The attached pdf contains the guide how to create the ext2. MOD: The script has the possibilities to turn on root. The root and unroot function is the same as 1 click root . MOD2: There was abug in the root function , a bad version of superuser.apk was included . Now it is replaced.App2sd_guide_GT540.pdfautorootapp2sd.zip Edited October 28, 2010 by joestone
Guest Amar_93 Posted October 23, 2010 Report Posted October 23, 2010 It says device not found any help would be appreciated. Thanks
Guest joestone Posted October 23, 2010 Report Posted October 23, 2010 It says device not found any help would be appreciated. Thanks USB debugging mode is on ? if yes try to unplug and replug the usb .
Guest CuteControl Posted October 24, 2010 Report Posted October 24, 2010 Steps to A2SD you say it is FAT First Patition Thank you, I would ask that the difference between FAT and FAT32 how Should choose what kind sir. Because now I do A2SD successfully done through the ADB Command, but sometimes the phone will not sue the SD Card to my Application does not work. Thank you.
Guest AerospaceMango Posted October 24, 2010 Report Posted October 24, 2010 :P :D working smooth. thanks! It's a real shame that there's nowhere to give thanks on here, except in a post! If there was a button, under the post, to give thanks, then the OP would have loads!!!
Guest joestone Posted October 24, 2010 Report Posted October 24, 2010 :P :D working smooth. thanks! Thanks ! Now the first post was modified , the program contains 1 click root too. App2sd will work even if you not root your phone and will turn off temporary if there is no sd or ext2 mount failure .
Guest sarbe Posted October 24, 2010 Report Posted October 24, 2010 (edited) Hi guys, tried this, everything went fine, after reboot i now have preparing sd card, checking for errors and it doesnt go away and i cant access sd card, any suggestions? Edited October 24, 2010 by sarbe
Guest joestone Posted October 24, 2010 Report Posted October 24, 2010 Hi guys, tried this, everything went fine, after reboot i now have preparing sd card, checking for errors and it doesnt go away and i cant access sd card, any suggestions? Check the partition on your sd. The first partitition should be FAT if your card is smaller than 4GB and should be FAT32 if bigger than 4 GB. The second partition should be ext2. Both partition must be primary.
Guest sarbe Posted October 24, 2010 Report Posted October 24, 2010 Thanks m8, how do i check the partition?
Guest joestone Posted October 24, 2010 Report Posted October 24, 2010 Thanks m8, how do i check the partition? You can check it using the minitool partititon wizard.
Guest sarbe Posted October 24, 2010 Report Posted October 24, 2010 The card is not showing on there m8
Guest joestone Posted October 24, 2010 Report Posted October 24, 2010 The card is not showing on there m8 Put the sd to a card reader and then start the partition wizard. Or turn on mass storage mode on the phone and then start the partition wizard.
Guest sarbe Posted October 24, 2010 Report Posted October 24, 2010 (edited) I don't have a card reader m8 and mass storage is on, still says preparing sd card, checking for errors. I followed the guide and formatted on fat32 but it is only a 2gig sd card and you have put fat for that, could that be the problem? Edited October 24, 2010 by sarbe
Guest joestone Posted October 24, 2010 Report Posted October 24, 2010 I don't have a card reader m8 and mass storage is on, still says preparing sd card, checking for errors Turn off mass storage mode , unmount the sd from the settings and format it in the phone . This will erase everything from the sd including the ext2. Then after reboot , create the ext2 again , turn off mass storage mode , restart the phone and apply app2sd.
Guest r00tk1t Posted October 24, 2010 Report Posted October 24, 2010 What about app-private? It's working?
Guest joestone Posted October 24, 2010 Report Posted October 24, 2010 What about app-private? It's working? app-private is not copied , I checked it on my phone and it is empty . I do not have idea what programs are using it .Of course it is possible to move it to the sd , but it was left out in this version.
Guest sarbe Posted October 24, 2010 Report Posted October 24, 2010 (edited) Does app2sd install apps automatically to partition or does it give you a choice where to install? Edited October 24, 2010 by sarbe
Guest joestone Posted October 24, 2010 Report Posted October 24, 2010 Does app2sd install apps automatically to partition or does it give you a choice where to install? If app2sd is on then apps will be installed to the ext2 partition.
Guest sarbe Posted October 24, 2010 Report Posted October 24, 2010 Is apps2sd accessible in the apps list as i dont have it there but seem to have the partition
Guest danfia Posted October 24, 2010 Report Posted October 24, 2010 need help..... i do a partition like pdf... i run file in XP.... i choose english... then??? i try 1 and 4 but when i install app. they go on memory phone??? why not in SD???? help pls thank
Guest joestone Posted October 24, 2010 Report Posted October 24, 2010 Is apps2sd accessible in the apps list as i dont have it there but seem to have the partition No this is not an application which is installed to the phone. It modifies system settings to mount the selected folders from the sd card's ext2 partition.If you see /data/app and the other selected folders mounted in the check screen then it is working.
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now