Guest RAT-BoyZ Posted October 25, 2010 Report Posted October 25, 2010 (edited) NOTE: Sorry, i have a bug from method with ClockworkMod recovery, may be bug from update.zip. Thank's ==================================================== Fiture : -SWAP -ext3/ext4 -Netfilter/Iptables - DroidWall only works with the mobile Internet. CONFIG_CPU_FREQ_MIN_TICKS = 0 (original 10) CONFIG_CPU_FREQ_SAMPLING_LATENCY_MULTIPLIER = 100 (original 1000) -Test the batteries to step 1-100. (PO dmesg calculated exactly is, some programs take charge values from somewhere else ... who knows where - write) ==================================================== ==================================================== Must be download : 1.http://www12.speedyshare.com/files/2...rnel%20v0.1.7z 2.http://www.mediafire.com/?8pd838v2jn8la7r Optional (If you use recovery Mod from ClockworkMod) 3.http://www.mediafire.com/?sau5zghlbllwi2r ==================================================== ==================================================== Installation: INSTRUCTIONS: (by arekl1988r) Short Guide Quick Copy files new kernel grab this script and put it on the card Unpack the archive files Kernel folder and copy it directly to the sd card Connect your phone in debug mode to PC Enter CMD and launch sequence adb shell (There will be $) is a type su and confirm on the phone (Should be #) # Sh / sdcard / copykernel.sh and the files are already copied and amended access rights Come on now, go to the flash boot fastboot flash boot boot.img ==================================================== ==================================================== OTHER STEP : IF YOU USE a ClockworkMod Recovery ROM : ONLY for those with RECOVERY (thx bakuj and arekl1988r) 1. Put your update.zip to the root directory of the SD card. 2. We go to Recovery (Home + Power) 3. We choose the second option (apply sdcard: update.zip) 4. Accept 5. Reboot the system 6. Turn off the cell and run once again in the Fastboot Mode 7. Boot.img can flash file: ==================================================== ==================================================== Customize SWAP'a: 1.Sozdat SWAP partition on a flash drive. 2. Set Swapper 2 3. Go to settings - tick the box Run swapper at startup / Safe Remount / Safe Unmount. 4. In the Menu indicate Swappiness 30. 4. Go to the Advanced preferences. There's a tick Use Swap Partition. 5. In paragraph Swap partition register / dev/block/vold/179: 3 (3 - means the third partition on a flash drive) 6. Put 2 ticks Recreate swap file / Reformat swap. 7. Exit setup and press the "On". The inscription Turning swap off (partition) FAIL and the following line does not pay attention. 8. Check whether the connected SWAP (eg through the Quick System info) Comparison of the count charging the two programs (70% and 77% at one time): ==================================================== result in attachment. source:4PDA special thanks to Quarx Edited October 30, 2010 by RAT-BoyZ
Guest brqueiros Posted October 25, 2010 Report Posted October 25, 2010 (edited) ==================================================== Must be download : 1.http://www12.speedyshare.com/files/2...rnel%20v0.1.7z This link does not work. EDIT: I managed to find the link: http://www12.speedyshare.com/files/2482615...ernel%20v0.1.7z Thanks for the tutorial. Edited October 25, 2010 by brqueiros
Guest Eazyy Posted October 25, 2010 Report Posted October 25, 2010 Sorry if this is a noobish question, but what is SWAP and ext3/ext4? I know that ext is a an alternative to FAT, but what advantage does it bring? And what advantage does CPU_FREQ bring?
Guest RAT-BoyZ Posted October 26, 2010 Report Posted October 26, 2010 Sorry if this is a noobish question, but what is SWAP and ext3/ext4? I know that ext is a an alternative to FAT, but what advantage does it bring? And what advantage does CPU_FREQ bring? Swap like a virtual memory. and ext2 like a FAT32 ext3 like a NTFS ext4 like a better then NTFS CMIIW
Guest RottenFoxBreath Posted October 26, 2010 Report Posted October 26, 2010 (edited) ext3 like a NTFS ext4 like a better then NTFS Not really... :P In some cases, you can do more damage to the card, with Ext3/4. The card only has a finite number of writes, and these go quicker with Ext3/4, as it's constantly writing/journaling, and also the card may not be up to the job(not class6, maybe class 2) Edited October 26, 2010 by RottenFoxBreath
Guest RAT-BoyZ Posted October 27, 2010 Report Posted October 27, 2010 Not really... :P In some cases, you can do more damage to the card, with Ext3/4. The card only has a finite number of writes, and these go quicker with Ext3/4, as it's constantly writing/journaling, and also the card may not be up to the job(not class6, maybe class 2) if you need use a ext3/4 you must using a Class 6. for class 2 you must using a etx2.
Guest david678 Posted October 30, 2010 Report Posted October 30, 2010 ==================================================== Fiture : -SWAP -ext3/ext4 -Netfilter/Iptables - DroidWall only works with the mobile Internet. CONFIG_CPU_FREQ_MIN_TICKS = 0 (original 10) CONFIG_CPU_FREQ_SAMPLING_LATENCY_MULTIPLIER = 100 (original 1000) -Test the batteries to step 1-100. (PO dmesg calculated exactly is, some programs take charge values from somewhere else ... who knows where - write) ==================================================== ==================================================== Must be download : 1.http://www12.speedyshare.com/files/2...rnel%20v0.1.7z 2.http://www.mediafire.com/?8pd838v2jn8la7r Optional (If you use recovery Mod from ClockworkMod) 3.http://www.mediafire.com/?sau5zghlbllwi2r ==================================================== ==================================================== Installation: INSTRUCTIONS: (by arekl1988r) Short Guide Quick Copy files new kernel grab this script and put it on the card Unpack the archive files Kernel folder and copy it directly to the sd card Connect your phone in debug mode to PC Enter CMD and launch sequence adb shell (There will be $) is a type su and confirm on the phone (Should be #) # Sh / sdcard / copykernel.sh and the files are already copied and amended access rights Come on now, go to the flash boot fastboot flash boot boot.img ==================================================== ==================================================== OTHER STEP : IF YOU USE a ClockworkMod Recovery ROM : ONLY for those with RECOVERY (thx bakuj and arekl1988r) 1. Put your update.zip to the root directory of the SD card. 2. We go to Recovery (Home + Power) 3. We choose the second option (apply sdcard: update.zip) 4. Accept 5. Reboot the system 6. Turn off the cell and run once again in the Fastboot Mode 7. Boot.img can flash file: ==================================================== ==================================================== Customize SWAP'a: 1.Sozdat SWAP partition on a flash drive. 2. Set Swapper 2 3. Go to settings - tick the box Run swapper at startup / Safe Remount / Safe Unmount. 4. In the Menu indicate Swappiness 30. 4. Go to the Advanced preferences. There's a tick Use Swap Partition. 5. In paragraph Swap partition register / dev/block/vold/179: 3 (3 - means the third partition on a flash drive) 6. Put 2 ticks Recreate swap file / Reformat swap. 7. Exit setup and press the "On". The inscription Turning swap off (partition) FAIL and the following line does not pay attention. 8. Check whether the connected SWAP (eg through the Quick System info) Comparison of the count charging the two programs (70% and 77% at one time): ==================================================== result in attachment. source:4PDA special thanks to Quarx When I have upgraded the kernel and I couldn't able to start the wifi,do you have such problem？
Guest RAT-BoyZ Posted October 30, 2010 Report Posted October 30, 2010 When I have upgraded the kernel and I couldn't able to start the wifi,do you have such problem？ i already update this method. Bug found in update.zip. thank you and sorry
Guest david678 Posted October 30, 2010 Report Posted October 30, 2010 i already update this method. Bug found in update.zip. thank you and sorry so can you solve the problem?
Guest RAT-BoyZ Posted October 31, 2010 Report Posted October 31, 2010 so can you solve the problem? yes, this bug already solved. read my tutorial again guys.
Guest reaperxt Posted November 5, 2010 Report Posted November 5, 2010 Hi guys, Does this kernel enable the gt540 to connect to ad-hoc wifi? Or does anyone know how to make this happen? Thanks in advance!
Guest dridri85 Posted November 5, 2010 Report Posted November 5, 2010 Where can I find copykernel.sh ?
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now