Guest manawenuz Posted October 29, 2010 Report Posted October 29, 2010 (edited) Hi , i wanted to install WM 6.5 on my omnia i 900 cellphone, but i ran into problem at first i tried to install 23075Full , when i hit the START button , it got stuck on 13% , i guess the second or the third time that the progress bar reaches 100% , anyway , i left it for 20 min , and nothing changed , so i tried it , without Download Content Files , and with Format Device's Internal Large Disk , so in the end , the log is like this : PDA Device Found! ------------------------------------------------------------------------------------- PDA Device ready to download! Please Press Start Button if You want to download image now... ------------------------------------------------------------------------------------- PDA 1 starts downloading... Don't plug it out until the label becomes blue!!! ------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------- Step 1. Eboot image Downloading Downloading EBOOT... Download failed!! it says , checksum failed , so i thought maybe i downloaded it wrong or something , so i tried it with 23017Gabes , the same problem there !!! and when i reset my cellphone the welcomescreen of wm6.1 comes up , tries to align , after alignment , it says (actually after a few minutes , Preconfiguration ok it is necessary to restart the device in order to make the changes take effect (or something imilar) , and after maybe 5 sec , it reboots the cellphone , and goes to an infinite loop !!! i tried to hard reset the cellphone , still the infinite loop exists , then i tried to put welcome.not using the active sync , i did it , and still the same thing was happening . i tried to download the firmware from samsung website , 6.1 , i downloaded this : http://fus.samsungmobile.com/omnia/sea/sp/..._updater_xp.exe it checks the firmware , and says that i am using the latest version , and doesn't flash the device . please help me , any help is appreciated , thank you. Edited October 30, 2010 by manawenuz
Guest manawenuz Posted October 30, 2010 Report Posted October 30, 2010 Hi , i wanted to install WM 6.5 on my omnia i 900 cellphone, but i ran into problem at first i tried to install 23075Full , when i hit the START button , it got stuck on 13% , i guess the second or the third time that the progress bar reaches 100% , anyway , i left it for 20 min , and nothing changed , so i tried it , without Download Content Files , and with Format Device's Internal Large Disk , so in the end , the log is like this : PDA Device Found! ------------------------------------------------------------------------------------- PDA Device ready to download! Please Press Start Button if You want to download image now... ------------------------------------------------------------------------------------- PDA 1 starts downloading... Don't plug it out until the label becomes blue!!! ------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------- Step 1. Eboot image Downloading Downloading EBOOT... Download failed!! it says , checksum failed , so i thought maybe i downloaded it wrong or something , so i tried it with 23017Gabes , the same problem there !!! and when i reset my cellphone the welcomescreen of wm6.1 comes up , tries to align , after alignment , it says (actually after a few minutes , Preconfiguration ok it is necessary to restart the device in order to make the changes take effect (or something imilar) , and after maybe 5 sec , it reboots the cellphone , and goes to an infinite loop !!! i tried to hard reset the cellphone , still the infinite loop exists , then i tried to put welcome.not using the active sync , i did it , and still the same thing was happening . i tried to download the firmware from samsung website , 6.1 , i downloaded this : http://fus.samsungmobile.com/omnia/sea/sp/..._updater_xp.exe it checks the firmware , and says that i am using the latest version , and doesn't flash the device . please help me , any help is appreciated , thank you. i tried to update it using GrandPrix v1.8.10_XP , and it bricked the phone , and it doesn't post anymore , when i insert the battery , the power button turns on , (turns red) , and that's it . here is the log of Grandprix : OnDeviceChange:DBT_DEVTYP_DEVICEINTERFACE (1) Device name:5&233cbb42&0&5 PDA Device 1 detected. --------------------------------------------------------------------------------------- PDA 1 starts downloading... --------------------------------------------------------------------------------------- EBOOT will be written. Total 1 PDA region(s) will be written . PHONE will be written. Don't plug it out until the label becomes blue!!! --------------------------------------------------------------------------------------- DownloadImage success... VerifyChecksum fail... DownloadImage success... VerifyChecksum fail... DownloadImage success... VerifyChecksum fail... (1) FlashImage : success!! (1) Re-Boot device and Close USB port (1) Wait for Re-Connecting Device. (1) Wait for Re-Connecting Device. (1) Wait for Re-Connecting Device. (1) Wait for Re-Connecting Device.
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now