Stuck on Dell Logo Screen

[Guest dilemmax]

After upgrading from O2 2.1 (build 8105) to Stephen Hyde's 2.2, I'm stuck on the Logo Screen. Someone please help me!

Upgrading from O2 2.1 (build 8105) to Stephen Hyde's 2.2

1. download Stephen Hyde's 2.2 update zip from here.
   
2. Rename update-new.zip to update.zip and copy it to the root of your SD Card.
   
3. Download recovery.alt.zip from here.
   
4. Move the recovery image into the same folder as the fastboot.exe.
   
5. Put your Streak into fastboot mode.
   
6. Open up command line type: fastboot -i 0x413c flash recovery recovery.alt.img
   
7. Hold down both the volume buttons and type: fastboot -i 0x413c reboot in command line.
   
8. In recovery select Software upgrade via Update.pkg on SD Card using volume keys and camera button to select. In the ClockworkMod recovery menu select Software upgrade via Update.pkg on SD Card and then Yes - Install /sdcard/update.zip. Once it's all done select reboot system now.
   
9. To enable data go Menu > Settings > Wireless & networks > Mobile networks and check off the Data enabled button. Then select Access Point Names and manually add the apn info for your carrier.
   
10. You should be all set up and ready to go with Froyo!
    

If you want to gain root use Universal Androot (download information seen above).

If you don't like the new screen density you can change it whenever you like by going into the /system folder and editing the build.prop file. Just change the line ro.sf.lcd_density=140 to ro.sf.lcd_density=160 to go back to default (changes will take effect after a reboot).

NOTE: There is a problem with the market where certain apps will not show up and to my knowledge we still don't have a fix for this.

Edited November 8, 2010 by dilemmax

[Guest SSMERK]

After upgrading from O2 2.1 (build 8105) to Stephen Hyde's 2.2, I'm stuck on the Logo Screen. Someone please help me!

do a reset click on the up and down volume button with the power button select option number 1 and see what happens that might fix it .

[Guest dilemmax]

do a reset click on the up and down volume button with the power button select option number 1 and see what happens that might fix it .

I did the factory reset a few times last night and it still won't go past the Dell Logo Screen.

I think I might have flashed the wrong baseband?

I wasn't sure which to update so I went with the first link (New Baseband Update Rom) and continued on with the instruction

Their are now 2 versions of this rom one for users who can update the baseband and one for those who need to stick with 2.1 baseband (REBELSIM USERS THIS MEANS YOU)

Download Links:

please continue to report on download speeds for these files

New Baseband Update Rom: http://build2.streakdroid.com/update-1.2.0-newbb.zip

Stock Baseband Rom: http://build2.streakdroid.com/update-1.2.0-nobb.zip

New Baseband File (required for new baseband rom): http://build2.streakdroid.com/amss.mbn

Edited November 9, 2010 by dilemmax

[Guest T.4.Z]

hi try to put your sd card in other phone

put an old version of froyo v 1.1 or 2.1 on the sd card

rename it in Update.zip

put the sd back in your phone

install it

uou phone will come back in older version but now dont stuck on dell screnn ^^

ive try this afternoon because have the same problem and now my streak work

[Guest SSMERK]

as i did before i had the wrong baseband but it should still install . after each install you did or upgrade did you let the phone load and did you do a reset on each update example 1.6 to 2.1 i did reset after install from 2.1 to 1.1.1 after install i did reset 1.2.0 i did a reset and made sure the phone booted and loaded then i shut down normal

[Guest dilemmax]

as i did before i had the wrong baseband but it should still install . after each install you did or upgrade did you let the phone load and did you do a reset on each update example 1.6 to 2.1 i did reset after install from 2.1 to 1.1.1 after install i did reset 1.2.0 i did a reset and made sure the phone booted and loaded then i shut down normal

After each install I did let the phone load but I didn't reset on each update. The phone still booted and worked. It was only after I went from O2 2.1 (build 8105) to Stephen Hyde's 2.2, I got the Dell logo screen.

[Guest dilemmax]

hi try to put your sd card in other phone

put an old version of froyo v 1.1 or 2.1 on the sd card

rename it in Update.zip

put the sd back in your phone

install it

your phone will come back in older version but now dont stuck on dell screen ^^

ive try this afternoon because have the same problem and now my streak work

Where did you get the old version of froyo from? I just want to make sure I use the same one as you to get my streak to work.

[Guest T.4.Z]

you can download it on downloads.streakdroid.com download it on your computer and rename it on Update.zip

put your sd card on sdcard reader or if you have not put your sd on other phone and try to connect the other phone to your computer and put the update.zip on sdcard

afeter the update.zip was on sd card put it back on your streak and press volume+/volume-/and start button on the same time

choose the second choice

choose update.upk

and now wait your streak install an old version and when he restart ......... yeah not stuck on dell screnn he work

http://downloads.streakdroid.com/djsteve/u...elease-v1.1.zip <---- The link for the froyo 2.2 v1.1 he work ive using it after my streak stuck on dell screnn

T.4.Z

[Guest dilemmax]

Yay!! Finally. I got it to work. It was a combination of wiping and clearing everything and flashing V1.1 and THEN flashing to V1.2.0.

Thanks for your help guys!!!!