My Streak Can't go to Fastboot_Mode

[Guest Wonsanim]

Can some one can help me I try to update My Streak from AT&T 1.6 to O2 1.6 to O2 2.1 ect. but I don't know what is happen I try to follow all the instructions from the start to tap the "Fastboot" button that will appear in the top-right corner of the screen.wait for about 10 seconds (you'll see "Wait for USB Fastboot detect" in the bottom-left corner of the screen in the meantime) and connect the Streak to your computer.when "Fastboot_Mode" appears on the Streak's screen..... My Device don't pass Wait for USB Fastboot detect..... and never appear in the screen the Fastboot_Mode. B) some ideas or some help :)

[Guest GriZlore]

i had this problem

it was due to the drivers, although the driver appeared to be the one I wanted (name wise) it didnt work, just like yours...

what i did was remove uninstall the driver from Windows device manager, and whilst my mighty Streak was plugged in, scanned for hardware changes, and reinstalled, and chose manually from the list of devices. I either slected google or android phone and selected from there. Then tried again and it worked.

Sorry I cant be more precise, but i have been up for hours and am dropping. B) But I am sure that is where your problem lies

[Guest Tim6772]

Assuming your on a Win pc....

Connect your Streak via USB

Open Device Manager

Look for your Device (may be Android Phone or Android 1.0)

If it has an exclaimation mark by it, you need to install the drivers for it.

Right click the device and select update drivers, click Let me pick from list

Then click Android device-Android Bootloader Interface

That should reinstall the drivers *for the port you've plugged your USB into*

Then try fastboot again

Hope that helps

[Guest brokenpixel]

Assuming your on a Win pc....

Connect your Streak via USB

Open Device Manager

Look for your Device (may be Android Phone or Android 1.0)

If it has an exclaimation mark by it, you need to install the drivers for it.

Right click the device and select update drivers, click Let me pick from list

Then click Android device-Android Bootloader Interface

That should reinstall the drivers *for the port you've plugged your USB into*

Then try fastboot again

Hope that helps

If that don't help try the "ADB Composite Drivers" on the same list. That worked for me too.

Win7 x64 for me