309 recovery image

[Guest fards]

this is the recovery from the 309_0_00 version released by dell last week.

It should allow easy way to fix the "black screen" and "stuck on logo"

flash this with fastboot, then run the update.pkg from the sdcard by dropping into recovery .

(next person that says bricked shouldn't get helped) B)

recovery.img.zip

Edited November 22, 2010 by fards

[Guest Warpedflash]

this is the recovery from the 309_0_00 version released by dell last week.

It should allow easy way to fix the "black screen" and "stuck on logo"

flash this with fastboot, then run the update.pkg from the sdcard by dropping into recovery .

(next person that says bricked shouldn't get helped) B)

Cheers fards I was fed up looking at a black recovery screen.

Now when o2 release their verison I will have to flash everything again :) yaaaaay...

[Guest flamewave]

this is the recovery from the 309_0_00 version released by dell last week.

It should allow easy way to fix the "black screen" and "stuck on logo"

flash this with fastboot, then run the update.pkg from the sdcard by dropping into recovery .

(next person that says bricked shouldn't get helped) B)

Thank you!Thank you!Thank you!You are great!

[Guest jeremy81]

I initially flashed from AT&T 1.6>O2 1.6>O2 2.1> to the "Untouched" fastboot method and had the 720p force close issue. I just used this recovery image and the latest build from Dell and it now works great! Thank you!

[Guest lundi]

Hmm im on Steves 1.4 , with this it should possible to flash the offical update.pkg directly from steves 1.4, correct ?

[Guest fards]

Hmm im on Steves 1.4 , with this it should possible to flash the offical update.pkg directly from steves 1.4, correct ?

The 309 upgrade pkg yes...

[Guest lundi]

The 309 upgrade pkg yes...

so you are the man of the week for me :)should be a good possibility to compare the signal strength from wifi on steves 1.4 and offical 2.2 B)

Edited November 22, 2010 by lundi

[Guest wired]

It works on the Optus dell streak too - thanks! B)

[Guest superbevo]

Cheers fards I was fed up looking at a black recovery screen.

Now when o2 release their verison I will have to flash everything again B) yaaaaay...

Question, how do you flash this? to you add to fastboot folder?

[Guest dumavi]

Question, how do you flash this? to you add to fastboot folder?

Hi guys.....Urgent I need help!!!!!!!....five days ago I have update to Froyo 2.2 (pack to baseband 00) from 1.6 in unlocked Streak to AT&T, baseband 31-US, version 6601.........and now my Streak is dead and lock to Dell logo with black screen. I have intentend all recommendations in this thread and in Xda-developers, Streaksmart.com, etc, etc.....and nothing: my device is locked and dead,.....please I need help!!!!!!...any idea is apreciated. B)

Thanks.

Maurice.

[Guest fards]

Hi guys.....Urgent I need help!!!!!!!....five days ago I have update to Froyo 2.2 (pack to baseband 00) from 1.6 in unlocked Streak to AT&T, baseband 31-US, version 6601.........and now my Streak is dead and lock to Dell logo with black screen. I have intentend all recommendations in this thread and in Xda-developers, Streaksmart.com, etc, etc.....and nothing: my device is locked and dead,.....please I need help!!!!!!...any idea is apreciated. B)

Thanks.

Maurice.

irc.freenode.net

#dellstreak

[Guest fards]

oops duplicate

Edited November 24, 2010 by fards

[Guest !SMAN!]

Not sure how i missed this recovery image, but i had a question. I'm at the 2.1 official that i put on my at&t locked device. Can i then flash this 309 recover to then upgrade directly to the 2.2 build?

[Guest Ed Venture]

Not sure how i missed this recovery image, but i had a question. I'm at the 2.1 official that i put on my at&t locked device. Can i then flash this 309 recover to then upgrade directly to the 2.2 build?

As long as we are at it, I am on a stock AT&T US Locked Streak - 1.6, build 6601, and baseband GAUSB1A111231. Here is what I am thinking of doing, but I am not 100% sure if it will work or not:

(1) rename the Streak_318_12821_00.pkg to Update.pkg (is it capital "U" or lower case "u" by the way)?

(2) copy the Update.pkg (or update.pkg) to the root of the SD card

(3) flash recovery via fast boot by doing the following:

C:\android-sdk-windows\tools>fastboot -i 0x413c flash recovery recovery.img

C:\android-sdk-windows\tools>fastboot -i 0x413c reboot

(4) reboot into recovery and apply the the update.pkg

(5) reboot and factory reset.

So, can I start from 1.6 and go straight to the 309 image then to 318, or do I need to move to O2 1.6, then to O2 2.1 before I can upgrade? I have been through all this with my old Streak which had to be sent back to Dell because it started doing regular and random factory resets. I promised myself I would wait on 2.2 until the update came straight from Dell, but I now hear that that could be more than a month away. I just can't take 1.6 anymore, especially since 2.2 has all the features and speed I require.

In short, I want to get to an official 2.2 as soon and as safe as possible, what is the best way to go from stock 1.6 as mentioned above?

Edited December 9, 2010 by Ed Venture

[Guest ronj1986]

As long as we are at it, I am on a stock AT&T US Locked Streak - 1.6, build 6601, and baseband GAUSB1A111231. Here is what I am thinking of doing, but I am not 100% sure if it will work or not:

(1) rename the Streak_318_12821_00.pkg to Update.pkg (is it capital "U" or lower case "u" by the way)?

(2) copy the Update.pkg (or update.pkg) to the root of the SD card

(3) flash recovery via fast boot by doing the following:

C:\android-sdk-windows\tools>fastboot -i 0x413c flash recovery recovery.img

C:\android-sdk-windows\tools>fastboot -i 0x413c reboot

(4) reboot into recovery and apply the the update.pkg

(5) reboot and factory reset.

So, can I start from 1.6 and go straight to the 309 image then to 318, or do I need to move to O2 1.6, then to O2 2.1 before I can upgrade? I have been through all this with my old Streak which had to be sent back to Dell because it started doing regular and random factory resets. I promised myself I would wait on 2.2 until the update came straight from Dell, but I now hear that that could be more than a month away. I just can't take 1.6 anymore, especially since 2.2 has all the features and speed I require.

In short, I want to get to an official 2.2 as soon and as safe as possible, what is the best way to go from stock 1.6 as mentioned above?

Can you tell me if this worked, if you tried it Ed Venture?

[Guest Wonsanim]

As long as we are at it, I am on a stock AT&T US Locked Streak - 1.6, build 6601, and baseband GAUSB1A111231. Here is what I am thinking of doing, but I am not 100% sure if it will work or not:

(1) rename the Streak_318_12821_00.pkg to Update.pkg (is it capital "U" or lower case "u" by the way)?

(2) copy the Update.pkg (or update.pkg) to the root of the SD card

(3) flash recovery via fast boot by doing the following:

C:\android-sdk-windows\tools>fastboot -i 0x413c flash recovery recovery.img

C:\android-sdk-windows\tools>fastboot -i 0x413c reboot

(4) reboot into recovery and apply the the update.pkg

(5) reboot and factory reset.

So, can I start from 1.6 and go straight to the 309 image then to 318, or do I need to move to O2 1.6, then to O2 2.1 before I can upgrade? I have been through all this with my old Streak which had to be sent back to Dell because it started doing regular and random factory resets. I promised myself I would wait on 2.2 until the update came straight from Dell, but I now hear that that could be more than a month away. I just can't take 1.6 anymore, especially since 2.2 has all the features and speed I require.

In short, I want to get to an official 2.2 as soon and as safe as possible, what is the best way to go from stock 1.6 as mentioned above?

This method works for you? you device you put in fastboot manual using the buttons(power & camera)?

[Guest !SMAN!]

This method works for you? you device you put in fastboot manual using the buttons(power & camera)?

I can state that 1.6 -> 2.1 -> 2.2 works, i don't know about 1.6 -> 2.1, but in theory, it should.

[Guest chinkostu]

dude i love you. installed clockworkmod for fun and it fubared my recovery. black screen/dell logo, the lot.

now it works!!! :) installing the 318 release, lets see how much it fixes (i ended up getting UID mismatch errors, eek!)

Edited December 10, 2010 by chinkostu

[Guest MrGPhantome]

Hey guys, I'm new to the forum and I'm new to the world of ROM flashing and fastbooting, but I have an idea how to safely do thats stuff.

I need help with specifics though, since my problem is technique it's just procedural order.

As of now, I'm running a Dell streak with o2 Android 2.1, build 8105 with a basband 21.

I want to upgrade to the official 2.2, so I rooted the 309 recovery.img and put the 318 pkg and called it update.pkg on my root sd.

However, haven't had luck since I'm getting a mismatch fota report. I tried just upgrading to the 309 update but it failed the same way too.

I must be missing a step, and I was hoping this forum could help me fill in the pieces.

Thanks

*** Never mind, I got it to work.

Edited December 10, 2010 by MrGPhantome

[Guest All3gro97]

this is the recovery from the 309_0_00 version released by dell last week.

It should allow easy way to fix the "black screen" and "stuck on logo"

flash this with fastboot, then run the update.pkg from the sdcard by dropping into recovery .

(next person that says bricked shouldn't get helped) :)

Dear Fards

Downloaded the file today and tried to extract but says it is password protected...can you share please?

many thanks

**Edit - ignore that sorry - downloaded to another location that did not already have a recovery image in it - extracted fine.

Edited December 10, 2010 by All3gro97

[Guest Seamus65]

Thanks Guys

Spent ages trying to find a stock recovery, and now installing the 318 update.

Wish me luck!!!

[Guest mooves]

Hi Guys,

Having an issue with this recovery rom. Flash appears ok but when booting into recovery I just get a black screen.

Tried from 2 different PCs. Same result. Installing a ClockworkMod recovery boots fine. Booting the device into the OS is fine too.

Any ideas please???. I have the factory Optus (AU) v1.6 version.

[Guest ali_alex]

Hi Guys,

Having an issue with this recovery rom. Flash appears ok but when booting into recovery I just get a black screen.

Tried from 2 different PCs. Same result. Installing a ClockworkMod recovery boots fine. Booting the device into the OS is fine too.

Any ideas please???. I have the factory Optus (AU) v1.6 version.

because 309 recovery it s not compatible whit 1.6rom ,you need to update to 2.1 first or untached 2.2 +309recovery

[Guest mooves]

Awesome worked a treat! Because I have the Optus version had to run the QDTool update first. Upgrading Optus Dell Streak - Whirlpool Then applied the Untouched 2.2 and voila. :)

Thanks for your help.

because 309 recovery it s not compatible whit 1.6rom ,you need to update to 2.1 first or untached 2.2 +309recovery

[Guest Tim6772]

I've been trying for days to revert from Steve's 1.5 to 118 with no success at all.

Tried again this morning by unzipping Fards 309 recovery image and copying to Fastboot and renaming it 309FardsRecovery (Tried 309, Fards, Recovery but just blank screen every time)

Dunno why this worked this time, but it did

Used Fastboot -i 0x413c flash recovery 309fardsrecovery.img and for some reason it worked.

tried this afternoon by reinstalling CWmod 2.5.1 and Steve's 1.5 then purposely renamed '309FardsRecovery.img' to fards for a rollback test...didnt work, renamed to Recovery.....didnt work, renamed to 309...didnt work, changed to 309fardsrecovery and it boots fine.

Maybe just a curiosity, but still a strange one all the same.

Hoping that the 309 recovery will work for O2's 15/12/10 release too.

I just play with ROM's to see what i like best. Liked Steve's 1.5 but lack of an essential calendar and slightly quicker battery drain put me off, so back to a 'Basic build' for me (for now)