Guest dairymasta Posted November 30, 2010 Report Share Posted November 30, 2010 Thanks for the tips. On the music player, can you replicate the error I'm getting on the stock music player and is this a bug in the firmware or is it just me? If it helps you, I have no issues with wifi staying connected. Maybe its one of your settings on your wifi sleep policy. Everybody seems to have that issue with the music player, dunno why, you'd have to ask Steve! Wifi is set to never sleep, it disconnects while I'm using it and doesn't reconnect unless I go back into the wifi settings and then it rescans. Weird stuff. Link to comment Share on other sites More sharing options...
Guest vijay15 Posted November 30, 2010 Report Share Posted November 30, 2010 Where is that located? and how do I change it? Okay ... here is what my gps.conf shows ... I hope this was the right file .... what do i alter? NTP_SERVER=xtra1.gpsonextra.net XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info # 4 - Debug, 5 - Verbose DEBUG_LEVEL = 3 # Intermediate position report, 1=enable, 0=disable INTERMEDIATE_POS=0 # Accuracy threshold for intermediate positions # less accurate positions are ignored, 0 for passing all positions # ACCURACY_THRES=5000 ################################ ##### AGPS server settings ##### ################################ # FOR SUPL SUPPORT, set the following SUPL_HOST=supl.google.com SUPL_PORT=7276 # FOR C2K PDE SUPPORT, set the following # C2K_HOST=c2k.pde.com or IP # C2K_PORT=1234 ################################ # EXTRA SETTINGS ################################ # Wiper (wifi positioning), 1=enable, 0=disable ENABLE_WIPER=1 Link to comment Share on other sites More sharing options...
Guest vijay15 Posted November 30, 2010 Report Share Posted November 30, 2010 Okay ... here is what my gps.conf shows ... I hope this was the right file .... what do i alter? NTP_SERVER=xtra1.gpsonextra.net XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info # 4 - Debug, 5 - Verbose DEBUG_LEVEL = 3 # Intermediate position report, 1=enable, 0=disable INTERMEDIATE_POS=0 # Accuracy threshold for intermediate positions # less accurate positions are ignored, 0 for passing all positions # ACCURACY_THRES=5000 ################################ ##### AGPS server settings ##### ################################ # FOR SUPL SUPPORT, set the following SUPL_HOST=supl.google.com SUPL_PORT=7276 # FOR C2K PDE SUPPORT, set the following # C2K_HOST=c2k.pde.com or IP # C2K_PORT=1234 ################################ # EXTRA SETTINGS ################################ # Wiper (wifi positioning), 1=enable, 0=disable ENABLE_WIPER=1 I just tried ca.pool.ntp.org (I am in Canada) in place of the NTP server ... still no location love :P Link to comment Share on other sites More sharing options...
Guest vijay15 Posted November 30, 2010 Report Share Posted November 30, 2010 Okay ... here is what my gps.conf shows ... I hope this was the right file .... what do i alter? NTP_SERVER=xtra1.gpsonextra.net XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info # 4 - Debug, 5 - Verbose DEBUG_LEVEL = 3 # Intermediate position report, 1=enable, 0=disable INTERMEDIATE_POS=0 # Accuracy threshold for intermediate positions # less accurate positions are ignored, 0 for passing all positions # ACCURACY_THRES=5000 ################################ ##### AGPS server settings ##### ################################ # FOR SUPL SUPPORT, set the following SUPL_HOST=supl.google.com SUPL_PORT=7276 # FOR C2K PDE SUPPORT, set the following # C2K_HOST=c2k.pde.com or IP # C2K_PORT=1234 ################################ # EXTRA SETTINGS ################################ # Wiper (wifi positioning), 1=enable, 0=disable ENABLE_WIPER=1 I just tried ca.pool.ntp.org (I am in Canada) in place of the NTP server ... still no location love :P Link to comment Share on other sites More sharing options...
Guest Gopu Posted November 30, 2010 Report Share Posted November 30, 2010 (edited) I've been playing with setcpu, as I wasn't overhappy with the profiles workaround.. Its a much neater solution to have the frequencies set in /system/setcpu and load them the first time. using adb then start setcpu, press menu, choose Device Selection, and show other Frequency Sets, scroll right down to the bottom, and Custom frequencies. from then on it should work fine.. use setcpu as you feel it will restart with these values loaded everytime :P HTH thanks. Even though i have setcpu , i never felt the need for altering the cpu speeds, but will give it a try Edited November 30, 2010 by Gopu Link to comment Share on other sites More sharing options...
Guest moto_user Posted November 30, 2010 Report Share Posted November 30, 2010 im getting market fcs on 1.4.6, any fix for that? i installed this battery percentage tweak, ended up with a whole bunch of fc because i had the kika theme, so i flashed the 1.4.6 and thats y im getting all the fc, any body knows whats happening, or what should i do? thanks Link to comment Share on other sites More sharing options...
Guest Crinos512 Posted November 30, 2010 Report Share Posted November 30, 2010 So, when is 1.4.7 or 1.5.0 going to drop? ...your development pace is amazing! Link to comment Share on other sites More sharing options...
Guest Truenash Posted November 30, 2010 Report Share Posted November 30, 2010 Everybody seems to have that issue with the music player, dunno why, you'd have to ask Steve! Wifi is set to never sleep, it disconnects while I'm using it and doesn't reconnect unless I go back into the wifi settings and then it rescans. Weird stuff. This appears to be a problem with all Streak builds. It happens on my Official O2 2.1 as well. Link to comment Share on other sites More sharing options...
Guest frankquattrone Posted November 30, 2010 Report Share Posted November 30, 2010 This appears to be a problem with all Streak builds. It happens on my Official O2 2.1 as well. Which problem did you have on 2.1? I was on 2.1 and didn't have either problem, the music pause problem or the wifi disconnect. I don't know if it was the official one O2 firmware though. I think I got it off Modaco but it did show the O2 logo when I booted up. Anyway, good to know that I'm not the only person with the music player problem on 1.4.6. Always good to know its not user error :P Link to comment Share on other sites More sharing options...
Guest fards Posted November 30, 2010 Report Share Posted November 30, 2010 I just tried ca.pool.ntp.org (I am in Canada) in place of the NTP server ... still no location love :P Try intermediate position 1 as well. Is Your network apn set to supl at the bottom? Link to comment Share on other sites More sharing options...
Guest vinokirk Posted November 30, 2010 Report Share Posted November 30, 2010 Anytime i use excel, It closes itself everytime while using it. It doesn't gives me a force close message, it just randomly shuts down during use, and I have to restart it again. Anyone experience this?? I get this when using Dolphin Browser HD Link to comment Share on other sites More sharing options...
Guest sukh singh Posted November 30, 2010 Report Share Posted November 30, 2010 Im still getting the issue with very low sound output..Using headphones to listen to music on various apps but volume is very low compared to same headphones on other mp3 players..I upgraded straight from 1.4.2 to 1.4.6? Link to comment Share on other sites More sharing options...
Guest Stephen Hyde Posted November 30, 2010 Report Share Posted November 30, 2010 ok folks i have a choice for you . probly for 1.5 or 1.6 versions which would you all prefer to have 1. front camera available in camera app (as is at moment) 2. front camera usable in fring etc only (as it was in 1.1.1/1.2) choice is yours folks, but until fring etc change their app its one or other Link to comment Share on other sites More sharing options...
Guest epuarlana Posted November 30, 2010 Report Share Posted November 30, 2010 Although I'm not a fring user, I think the more important/necessary usage would be fring. Infact I only used frontcam once for a snapshot. Link to comment Share on other sites More sharing options...
Guest rebski Posted November 30, 2010 Report Share Posted November 30, 2010 ok folks i have a choice for you . probly for 1.5 or 1.6 versions which would you all prefer to have 1. front camera available in camera app (as is at moment) 2. front camera usable in fring etc only (as it was in 1.1.1/1.2) choice is yours folks, but until fring etc change their app its one or other Hi Steve, my vote is for Video Chat, Fring etc. please Thanks Link to comment Share on other sites More sharing options...
Guest fards Posted November 30, 2010 Report Share Posted November 30, 2010 front camera is so bad that I can't see why anyone would want to take a pic with it :P Link to comment Share on other sites More sharing options...
Guest Cue_32 Posted November 30, 2010 Report Share Posted November 30, 2010 Hi Steve, my vote is for Video Chat, Fring etc. please Thanks +1 on this and yes to the Miren idea. I'm using it in place of my stock browser. Link to comment Share on other sites More sharing options...
Guest mdmglobal Posted November 30, 2010 Report Share Posted November 30, 2010 ok folks i have a choice for you . probly for 1.5 or 1.6 versions which would you all prefer to have 1. front camera available in camera app (as is at moment) 2. front camera usable in fring etc only (as it was in 1.1.1/1.2) choice is yours folks, but until fring etc change their app its one or other My vote is for video vs camera. Thanks for l the hard work. Link to comment Share on other sites More sharing options...
Guest Reddy232 Posted November 30, 2010 Report Share Posted November 30, 2010 I am on Stephen Hyde's v1.1 right now. What is the easiest way to get to 1.4.6? Also, where can I download fastboot? and How to use it on mac? Please let me know I tried fastboot last night but it just said "waiting for device" and nothing happened. Link to comment Share on other sites More sharing options...
Guest Edrill Posted November 30, 2010 Report Share Posted November 30, 2010 +1 for front camera for Fring, etc. Link to comment Share on other sites More sharing options...
Guest digthemlows Posted November 30, 2010 Report Share Posted November 30, 2010 Fring! I bought this phone specifically for it ability to do that, I have a brand new 6 week old baby girl and mom has an iphone4 so we fring so I can see the baby!! Link to comment Share on other sites More sharing options...
Guest bhull521 Posted November 30, 2010 Report Share Posted November 30, 2010 ok folks i have a choice for you . probly for 1.5 or 1.6 versions which would you all prefer to have 1. front camera available in camera app (as is at moment) 2. front camera usable in fring etc only (as it was in 1.1.1/1.2) choice is yours folks, but until fring etc change their app its one or other Fring please. Link to comment Share on other sites More sharing options...
Guest vijay15 Posted November 30, 2010 Report Share Posted November 30, 2010 Try intermediate position 1 as well. Is Your network apn set to supl at the bottom? Right now ... It says ... # FOR SUPL SUPPORT, set the following SUPL_HOST=supl.google.com SUPL_PORT=7276 Should I change the SUPL_HOST to Bell instead of supl.google.com? and then do i change the port as well? Andl astly, do i haveto remove the number sign at all? Link to comment Share on other sites More sharing options...
Guest nanostreak Posted November 30, 2010 Report Share Posted November 30, 2010 ok folks i have a choice for you . probly for 1.5 or 1.6 versions which would you all prefer to have 1. front camera available in camera app (as is at moment) 2. front camera usable in fring etc only (as it was in 1.1.1/1.2) choice is yours folks, but until fring etc change their app its one or other Fring please! What use would be a front facing camera for photos? The reflective part around the back camera is there so folks can better aim at themselves if desired (same for the polished apple on the iphone). Link to comment Share on other sites More sharing options...
Guest Stephen Hyde Posted November 30, 2010 Report Share Posted November 30, 2010 ok i think thats enough comments to say most want video support - new build will have the new frameworks etc removed to allow cam Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now