Guest prawnballs Posted December 14, 2010 Report Posted December 14, 2010 You may have seen my 'Pooly Streak' thread. Well I thought I would give the QDLTool a go and getting an error when it tries to connect by ADB. The log says 'reboot.....ok', but there is no sign of a reboot on the device. I downloaded and installed the latest Dell driver as set out at the beginning of the tutorial and I have not had any issues previously accessing any of my numerous Streak's by Fastboot or ADB. Any clue as to where I am going wrong? HW: Board ID: Comment: -- LOG -- ###QDLTool: M 2.7.4.8, build ID: 1.301.20101022, time stamp: Tue Dec 14 19:54:21 2010 Check image DBL: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\dbl.mbn ... Check image FSBL: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\fsbl.mbn ... Check image OSBL: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\osbl.mbn ... Check image AMSS: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\amss.mbn ... Check image DSP1: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\dsp1.mbn ... Check image APPSBL: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\appsboot.mbn ... Check image DT: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\DT.img ... Check image boot.img: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\boot.img ... Check image system.img: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\system.img ... Check image userdata.img: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\userdata.img ... Check image recovery.img: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\recovery.img ... Check image logfilter.img: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\logfilter.img ... Check image Region: C:\Streak\repairtool\QDLTool3rd_20101022_GAUSB1A130500\images\RC_us.img ... Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile Check images ok Download in speedup way Open COM port success OSBL version: 12-5035-AUSB1AM-09 osbl.mbn version: Baseband image version: M8650BAUSB1AM5035SIGN Check device and image is Austin Baseband image version: M8650BAUSB1AM5035SIGN Check device and image is Austin Open COM port success Check Secure Boot is enabled #Set Fast Boot Flag success Open COM port success Test communication success Check Secure Boot is enabled #DBL to DDR success #FSBL to DDR success #OSBL to DDR success #DT to DDR success #backup FSBL to DDR success Run HEX success Check Secure Boot is enabled Streaming hello success Send Security mode success Download partition table success #Download DBL success #Download FSBL success #Download OSBL success #Download DT success #Download backup FSBL success Erase EFS2 success Wait for rebooting ....... ok Wait for modem set up ...... Wait for ADB device ......... ERROR[D2]: wait ADB fastboot mode timeout! Please check that device is exist and driver is properly installed. Download Fail! - 2010/12/14 19:54:51 Elapsed Time: 29.84 sec
Guest Stephen Hyde Posted December 14, 2010 Report Posted December 14, 2010 try using downloads.streakdroid.com/djsteve/streakflash.zip instead to get into fastboto and update the driver to the qdl provided version
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now