Guest vekkio Posted December 26, 2010 Report Share Posted December 26, 2010 good work roggin i wait for the fix :( Link to comment Share on other sites More sharing options...
Guest Morris Lee Posted December 26, 2010 Report Share Posted December 26, 2010 I got one more question, how does this run on the nand? EXT4 like gingerbread originally intended? or due to old kernal it will run on YAFFS? Link to comment Share on other sites More sharing options...
Guest AlterI Posted December 26, 2010 Report Share Posted December 26, 2010 (edited) Every suggestion and comment are welcome. :( Thanks to roggin, Andrea and everyone involved for the great job! The room is already great. What I found in the room. (released by roggin on the 26th of December and flashed above off. unlocked for 256m 2.2) '+' looks fast, (fast boot, in Yandex map application difference with 2.2 is great, restoring withTitaniumBackup looked very fast) multi-touch is ok, even dragging with 2 fingers. (peculiarity of our hardware is still there but I got used with it) GSM, EDGE is ok. No loss of signal detected. BT stereo headset was connected but music wasn't redirected (My failure is not excluded) '-' once freezed during boot on CM logo WIFI doesn't work Can't disable haptic feedback (feedback on press and release) Music wasn't redirected to my BT headset (My failure is not excluded) Only 2G option is not working. (becomes unchecked after reboot) 3d drawer in LauncherPro isn't responsible for touch. Can't adjust sensitivity for the 4 buttons (and it is low for me) USB mass storage not working Auto brightness not working Prox sensor doesn't work during a call Quadrant 3d test failed. 2d image was cut at the bottom. Other results were somewhat near average Edited December 26, 2010 by AlterI Link to comment Share on other sites More sharing options...
Guest fischschneehase Posted December 26, 2010 Report Share Posted December 26, 2010 iam missing the cool gingerbread screenoff animation ;) btw usb mount works for me :( Link to comment Share on other sites More sharing options...
Guest Morris Lee Posted December 26, 2010 Report Share Posted December 26, 2010 iam missing the cool gingerbread screenoff animation ;) btw usb mount works for me :( AHHA! I was JUST wondering if it is included in this ROM, XD Link to comment Share on other sites More sharing options...
Guest Andrea1Liquid Posted December 26, 2010 Report Share Posted December 26, 2010 We tested and USB mounting works for both roggin and me Link to comment Share on other sites More sharing options...
Guest simoneser Posted December 26, 2010 Report Share Posted December 26, 2010 (edited) Good progress. Here are my suggestions: -Remove ADW Launcher and replace it with stock 2.3 launcher -Remove ROM Manager - it Force Closes -Remove Terminal emulator, Spare Parts and Dev Tools: make it the most AOSP possible -Can't install any apks...it says that there aren't any certificates available -Insert new animations (don't know why there aren't in this rom, they are by default in Gingerbread) -My device seems to not go to H. Stays only in 3G. -Can't login in Google account, maybe it's related on above bug Confirmed USB Mount not working: when you click on the notifications, you'll see for some moments the splash screen but it auto-hides Edited December 26, 2010 by simoneser Link to comment Share on other sites More sharing options...
Guest Morris Lee Posted December 26, 2010 Report Share Posted December 26, 2010 Good progress. Here are my suggestions: -Remove ADW Launcher and replace it with stock 2.3 launcher -Remove ROM Manager - it Force Closes -Remove Terminal emulator, Spare Parts and Dev Tools: make it the most AOSP possible -Can't install any apks...it says that there aren't any certificates available -Insert new animations (don't know why there aren't in this rom, they are by default in Gingerbread) -My device seems to not go to H. Stays only in 3G. -Can't login in Google account, maybe it's related on above bug Confirmed USB Mount not working: when you click on the notifications, you'll see for some moments the splash screen but it auto-hides +1 to the top 3 suggestions!! Link to comment Share on other sites More sharing options...
Guest MCAlex Posted December 26, 2010 Report Share Posted December 26, 2010 Terminal Emulator is a Must-Have. I think they mustn't remove it. Link to comment Share on other sites More sharing options...
Guest simoneser Posted December 26, 2010 Report Share Posted December 26, 2010 You can download it from Market, or they can provide a separate pack for 3rd party app, or move 3rd party apps to /data/app so you can remove them easily if you don't need them. Link to comment Share on other sites More sharing options...
Guest tmp_do Posted December 26, 2010 Report Share Posted December 26, 2010 u can remove it easily from system too Link to comment Share on other sites More sharing options...
Guest Andrea1Liquid Posted December 26, 2010 Report Share Posted December 26, 2010 (edited) Guys, another tip for who wants to compile gingerbread (on ubuntu 10.10) is that he has not to install jkd5 and neither openjdk6 because jdk6 is preinstalled on Ubuntu. If you get something like: ============================================ build/core/base_rules.mk:74: *** Module name: bravo-keypad.kcm build/core/base_rules.mk:75: *** Makefile location: device/htc/bravo build/core/base_rules.mk:76: * build/core/base_rules.mk:77: * Each module must use a LOCAL_MODULE_TAGS in its build/core/base_rules.mk:78: * Android.mk. Possible tags declared by a module: build/core/base_rules.mk:79: * build/core/base_rules.mk:80: * optional, debug, eng, tests, samples build/core/base_rules.mk:81: * build/core/base_rules.mk:82: * If the module is expected to be in all builds build/core/base_rules.mk:83: * of a product, then it should use the build/core/base_rules.mk:84: * "optional" tag: build/core/base_rules.mk:85: * build/core/base_rules.mk:86: * Add "LOCAL_MODULE_TAGS := optional" in the build/core/base_rules.mk:87: * Android.mk for the affected module, and add build/core/base_rules.mk:88: * the LOCAL_MODULE value for that component build/core/base_rules.mk:89: * into the PRODUCT_PACKAGES section of product build/core/base_rules.mk:90: * makefile(s) where it's necessary, if build/core/base_rules.mk:91: * appropriate. build/core/base_rules.mk:92: * build/core/base_rules.mk:93: * If the component should be in EVERY build of ALL build/core/base_rules.mk:94: * products, then add its LOCAL_MODULE value to the build/core/base_rules.mk:95: * PRODUCT_PACKAGES section of build/core/base_rules.mk:96: * build/target/product/core.mk build/core/base_rules.mk:97: * build/core/base_rules.mk:98: *** user tag detected on new module - user tags are only supported on legacy modules. Stop.[/codebox] you can fix that by replacing “LOCAL_MODULE_TAGS := user” in every Android.mk with “LOCAL_MODULE_TAGS := optional”. You can do that by typing that on the terminal: "find ./ -exec grep -l "LOCAL_MODULE_TAGS := user" {} \; -exec sed -i.bak s/"LOCAL_MODULE_TAGS := user"/"LOCAL_MODULE_TAGS := optional"/g {} \;". After that you have to downgrade to gcc 4.3 because 4.4 produces errors. You can do this by typing that on the terminal: [codebox]rm /usr/bin/gcc rm /usr/bin/g++ ln -s /usr/bin/gcc-4.3 /usr/bin/gcc ln -s /usr/bin/g++-4.3 /usr/bin/g++ Then you can compile with the known commands :( I hope to be helpful ;) [source: http://journal.tianhao.info/2010/12/compil...n-ubuntu-10-10/] Edited December 26, 2010 by Andrea1Liquid Link to comment Share on other sites More sharing options...
Guest CedricGatay Posted December 26, 2010 Report Share Posted December 26, 2010 Great work guys, USB mount works for me under OSX, really good experience so far (without Wifi/BT/Cam but it is not that important :() Link to comment Share on other sites More sharing options...
Guest snootched Posted December 26, 2010 Report Share Posted December 26, 2010 We tested and USB mounting works for both roggin and me Hi Andrea - I confirmed on my liquid E that after initial flash of the ROM - USB mounting works fine for me. Once I swap the symlink around for dalvik-cache (I basically 'ln -s /cache/dalvik-cache /data/dalvik-cache') as after initial flash+boot /cache only has ~8MB free. After this swap - USB mount does not work.. really odd. Upon reboot the cache did regenerate properly. I will mess around with it a bit more today and report back. Link to comment Share on other sites More sharing options...
Guest bais Posted December 26, 2010 Report Share Posted December 26, 2010 Waiting for Wifi fix to try, since I don't have a data plan. Great job :( Link to comment Share on other sites More sharing options...
Guest koudelka Posted December 26, 2010 Report Share Posted December 26, 2010 Good progress. Here are my suggestions: -Remove ADW Launcher and replace it with stock 2.3 launcher -Remove ROM Manager - it Force Closes -Remove Terminal emulator, Spare Parts and Dev Tools: make it the most AOSP possible -Can't install any apks...it says that there aren't any certificates available -Insert new animations (don't know why there aren't in this rom, they are by default in Gingerbread) -My device seems to not go to H. Stays only in 3G. -Can't login in Google account, maybe it's related on above bug Confirmed USB Mount not working: when you click on the notifications, you'll see for some moments the splash screen but it auto-hides Both dev tools and spare parts are apart of AOSP :( but I agree it should at least be moved to the data partition but I dont think this was meant as a real release, just demo of what is working ;) Link to comment Share on other sites More sharing options...
Guest akira.pwr Posted December 26, 2010 Report Share Posted December 26, 2010 USB don't works for me, rom runs fast, I can't sync with twitter, nice work anyway guys. :( Link to comment Share on other sites More sharing options...
Guest Mascherano Posted December 26, 2010 Report Share Posted December 26, 2010 Merry Christmas. Thanks :( Link to comment Share on other sites More sharing options...
Guest Loeb87 Posted December 26, 2010 Report Share Posted December 26, 2010 (edited) to me the usb does not work, anyway great work keep it up! Edited December 26, 2010 by Loeb87 Link to comment Share on other sites More sharing options...
Guest ctos Posted December 26, 2010 Report Share Posted December 26, 2010 fantastic job! I will jump in when wifi is ok. Thanks all Devs' great efforts to make it true! Link to comment Share on other sites More sharing options...
Guest fischschneehase Posted December 26, 2010 Report Share Posted December 26, 2010 great job but plaese include the gingerbread animations :( Link to comment Share on other sites More sharing options...
Guest Varyag Posted December 26, 2010 Report Share Posted December 26, 2010 great job but plaese make SOME previous projects up to date and more stable :( Link to comment Share on other sites More sharing options...
Guest Temur Posted December 26, 2010 Report Share Posted December 26, 2010 Woooow! Gread job! -buetooth,gps,sd-card(fat32),3g,sensors,leds work -USB-Tethering doesnt work, but usb-connection is work. -camera an camcorder not work -wifi,wifi-tethering not work -the animations are missing System is faster ^^ many thanks! i love it! Please try to get error free *sry for my english* Link to comment Share on other sites More sharing options...
Guest mik93250 Posted December 26, 2010 Report Share Posted December 26, 2010 roggin I've download a dump of nexus S system and can you help me to find files of screen off animation of gingerbread? Thx Link to comment Share on other sites More sharing options...
Guest fischschneehase Posted December 26, 2010 Report Share Posted December 26, 2010 roggin I've download a dump of nexus S system and can you help me to find files of screen off animation of gingerbread? Thx great idea :( Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now