Guest parithosh93 Posted December 25, 2010 Report Posted December 25, 2010 hi, I have the acer liquid a1 and i tried to install malez recovery using the installMalezRecovery_0.6.1_FULL.exe , but it keeps saying access denied. I have reinstalled the acer drivers, connected my phone to the computer with usb debugging enabled and now i am at my wits end. Please help me. thanks in advance.
Guest Harness Posted December 25, 2010 Report Posted December 25, 2010 hi, I have the acer liquid a1 and i tried to install malez recovery using the installMalezRecovery_0.6.1_FULL.exe , but it keeps saying access denied. I have reinstalled the acer drivers, connected my phone to the computer with usb debugging enabled and now i am at my wits end. Please help me. thanks in advance. Can you give me the full error, as well as what rom you're using? Harness.
Guest parithosh93 Posted December 25, 2010 Report Posted December 25, 2010 could you please give me a proper guide to follow to install custom roms, im planning on installing the liquid metal rom by dario. I think with a proper guide i should be able to do it myself. As for the rom i was using- stock acer eclair, trying to change it to liquid metal.
Guest Chewy11 Posted December 25, 2010 Report Posted December 25, 2010 Do you have the Malez recovery working? http://code.google.com/p/acer-liquid-malez...ki/howToInstall What do you mean by access denied? Where when why? Keep digging around MoDaCo...All of you questions are answered, read up, try, and then ask specific questions. Back in August it took me a while to get to the bottom of all my questions. http://code.google.com/p/acer-liquid-commu...rom-bugtracker/ http://code.google.com/p/acer-liquid-commu...uidCommunityROM These are for LCR but most ROMs are installed the same way current .bin list http://android.modaco.com/content/acer-liq...act-collection/ happy holidays!!!!
Guest parithosh93 Posted December 28, 2010 Report Posted December 28, 2010 hi, I managed to install the bin 4.002.14.EMEA.GEN1_A22F_A_256_bin and flashed it. I plan to install dario's froyo metal v2.75 lite. Malez recovery went well and it said reboot phone in recovery mode (volume down+camera+start) and i did that, the screen with some stuff written on it is coming(recovery mode i guess). i can see this: partition checksum splash1:chkcum =8ba9da08 OK boot:chksum =57c4a49a OK recovery:chksum=d6ce8999 !=002152e0 **fail** (its in red color) system:chksum =23c8dfa3 OK ========= <<FAIL>> (in red) thats all the phone stops. I dont know how to switch it off or even how to change the screen. Please help me!! thanks in advance.
Guest Harness Posted December 28, 2010 Report Posted December 28, 2010 hi, I managed to install the bin 4.002.14.EMEA.GEN1_A22F_A_256_bin and flashed it. I plan to install dario's froyo metal v2.75 lite. Malez recovery went well and it said reboot phone in recovery mode (volume down+camera+start) and i did that, the screen with some stuff written on it is coming(recovery mode i guess). i can see this: partition checksum splash1:chkcum =8ba9da08 OK boot:chksum =57c4a49a OK recovery:chksum=d6ce8999 !=002152e0 **fail** (its in red color) system:chksum =23c8dfa3 OK ========= <<FAIL>> (in red) thats all the phone stops. I dont know how to switch it off or even how to change the screen. Please help me!! thanks in advance. Pull the battery. Make sure you're hitting volume down + cam + power. That's partition chksum. Harness.
Guest parithosh93 Posted December 28, 2010 Report Posted December 28, 2010 yess i got it to work thanks to you :(
Guest Franc3s Posted January 25, 2011 Report Posted January 25, 2011 (edited) yess i got it to work thanks to you :lol: I have exaclty the same problem with my liquid E but o didn´t understad how to solve this. I pull the batery but everytime i get in recovery this error come back Edited January 25, 2011 by Franc3s
Guest Franc3s Posted January 25, 2011 Report Posted January 25, 2011 I have exaclty the same problem with my liquid E but o didn´t understad how to solve this. I pull the batery but everytime i get in recovery this error come back Ok, everything working
Guest Dashie84 Posted May 27, 2011 Report Posted May 27, 2011 I cant also install malez, the installation went fine, than when i reboot it appear an exclamation mark and after a while the old recovery -.-
Guest Ramdanih Posted May 28, 2011 Report Posted May 28, 2011 I have exaclty the same problem with my liquid E but o didn´t understad how to solve this. I pull the batery but everytime i get in recovery this error come back how to fix it???? I always try partition chksum, and always appear "Fail" i've tried the method above, pull the battery and press the vol down + cam + power (with USB Cable connected) but, the Partition chksum always writen "Fail" <in Red>, pliss... help me to solve the problem..... :rolleyes: <_< :P :( :D
Guest FeareX Posted June 7, 2011 Report Posted June 7, 2011 I cant also install malez, the installation went fine, than when i reboot it appear an exclamation mark and after a while the old recovery -.- I have the same problem since I installed the 4.002.14 update :D Any ways to solve this?
Guest Eraknelo Posted June 8, 2011 Report Posted June 8, 2011 (edited) I have the same problem since I installed the 4.002.14 update :P Any ways to solve this? I had this problem too! Flashed the BIN back to 4.002.08. You can find the instructions how to do so here: http://android.modaco.com/index.php?s=&...t&p=1608913 (Under "4.1- How to flash a .bin file"), then download this: http://hotfile.com/dl/80485969/1628600/4.0...05_bin.zip.html IF YOU HAVE A LIQUID E!!!! (or Ferrari, I think). However, WATCH OUT! FLASHING BIN FILES IS EXTREMELY DANGEROUS, BE PATIENT WHILE DOING IT, IT IS CRUCIAL! AFTER YOU CLICK THE START BUTTON, BE ATLEAST 1 METRE AWAY FROM YOUR COMPUTER AND PHONE WHILE IT'S DOING IT!!! It is an extremely SCARY experience. Trust me. You will hear your phone disconnect during it. But please, just let it go, and WAIT. Don't touch ANYTHING, until it says it's finished ;) If you do not have a Liquid E, choose the correct one in this topic: http://android.modaco.com/content/acer-liq...act-collection/ (Thank you so much, Kenelm!). Again, WATCH OUT, USE THE CORRECT BIN! If you need any more help, PM me. I may have 3 posts (at the time of posting this), but I know how to handle the Liquid. And as for you, parithosh93, Franc3s and Ramdanih, you all got that problem because you had USB connected to your computer (maby even charger, I haven't checked if that also makes it fail)! I don't know why either, but that ALWAYS is the case for me. Whenever I get that message, I booted into recovery with USB connected to my computer. The problem with the exclamation mark and an Android puppet/whatever they call that ugly green dude, is the 4.002.14 update of the Acer Liquid. Follow the above instructions to change back to .08. It is (to my knowledge) the only way to fix it. I think they're trying to prevent flashing with the .14 update. They failed. Edited June 8, 2011 by Eraknelo
Guest androich Posted June 15, 2011 Report Posted June 15, 2011 (edited) hi, I managed to install the bin 4.002.14.EMEA.GEN1_A22F_A_256_bin and flashed it. I plan to install dario's froyo metal v2.75 lite. Malez recovery went well and it said reboot phone in recovery mode (volume down+camera+start) and i did that, the screen with some stuff written on it is coming(recovery mode i guess). i can see this: partition checksum splash1:chkcum =8ba9da08 OK boot:chksum =57c4a49a OK recovery:chksum=d6ce8999 !=002152e0 **fail** (its in red color) system:chksum =23c8dfa3 OK ========= <<FAIL>> (in red) thats all the phone stops. I dont know how to switch it off or even how to change the screen. Please help me!! thanks in advance. Dear All... Plis Help me... i was trying the method above... i've tried flashing the Recovery by the malez recovery from 5.3 until 6.1 @ this link, http://code.google.com/p/acer-liquid-malez.../downloads/list but, it always writen : recovery : fail (in red) whe i pull the Battery, take the USB Cable Off, than Take The USB Cable ON again on my Liquid E, than i press Vol.Down+Cam+Power its appear : partition checksum splash1:chkcum =8ba9da08 OK boot:chksum =57c4a49a OK recovery:chksum=d6ce8999 !=002152e0 **fail** (its in red color) system:chksum =23c8dfa3 OK ========= <<FAIL>> (in red) just pliss... Help me.... WHAT COULD I DO NOW....???? :-( :-( :-( MY SISTEM IS Version Froyo 2.2 baseband A1 -05.01.05 Buil Number : 4.005.05_AAP_GEN2 Edited June 15, 2011 by androich
Guest androich Posted June 17, 2011 Report Posted June 17, 2011 I had this problem too! Flashed the BIN back to 4.002.08. You can find the instructions how to do so here: http://android.modaco.com/index.php?s=&...t&p=1608913 (Under "4.1- How to flash a .bin file"), then download this: http://hotfile.com/dl/80485969/1628600/4.0...05_bin.zip.html IF YOU HAVE A LIQUID E!!!! (or Ferrari, I think). However, WATCH OUT! FLASHING BIN FILES IS EXTREMELY DANGEROUS, BE PATIENT WHILE DOING IT, IT IS CRUCIAL! AFTER YOU CLICK THE START BUTTON, BE ATLEAST 1 METRE AWAY FROM YOUR COMPUTER AND PHONE WHILE IT'S DOING IT!!! It is an extremely SCARY experience. Trust me. You will hear your phone disconnect during it. But please, just let it go, and WAIT. Don't touch ANYTHING, until it says it's finished ;) If you do not have a Liquid E, choose the correct one in this topic: http://android.modaco.com/content/acer-liq...act-collection/ (Thank you so much, Kenelm!). Again, WATCH OUT, USE THE CORRECT BIN! If you need any more help, PM me. I may have 3 posts (at the time of posting this), but I know how to handle the Liquid. And as for you, parithosh93, Franc3s and Ramdanih, you all got that problem because you had USB connected to your computer (maby even charger, I haven't checked if that also makes it fail)! I don't know why either, but that ALWAYS is the case for me. Whenever I get that message, I booted into recovery with USB connected to my computer. The problem with the exclamation mark and an Android puppet/whatever they call that ugly green dude, is the 4.002.14 update of the Acer Liquid. Follow the above instructions to change back to .08. It is (to my knowledge) the only way to fix it. I think they're trying to prevent flashing with the .14 update. They failed. i'd tried downloading from your link, i'd tried flashing the BIN back to 4.002.08, but, when i tried doing MalezRecovery full 6.01, always writing on my Liquid E : usb_init writing 'recovery' (4984832 bytes) - Fail <in Red> So, Plissssssssssssss.... is there any body can helpme.... plisss.... :P :D :D
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now