Guest fonix232 Posted December 25, 2010 Report Posted December 25, 2010 (edited) FroyoBlade 0.3 Based on Libero 003Z Based on the first officially released Froyo for the Blade, FroyoBlade presents the latest possible build directly from ZTE's kitchen! Currently not working: - Telephony (due to different RIL) - Original kernel (different base address, and some other stuff) - Anything else I don't know about Features: - Stock Froyo with root - Stagefright enabled - 32MB Dalvik VM heap - Enabled HW UI acceleration (may cause problems with the screen (distorted left areas, etc), please report them ASAP with your device specs too!) Download: http://fonix232.co.cc/rom/index.php?dir=%2Fblade%2Ffroyo Credits: - Google for Android - ZTE for Blade and Froyo release - Sebastian404 for making this build work - ChainsDD for Superuser - DSIXDA for his great kitchen WARNING! EVERYTHING uploaded to the FROYO folder on my server is highly unstable, and may cause your phone to lag, die, brick, or blow up. Hereby I state that I'm not responsible for ANYTHING what happens to your device. You've been warned! Edited December 25, 2010 by fonix232
Guest Sebastian404 Posted December 25, 2010 Report Posted December 25, 2010 (edited) - update-script (does not work with CWM 2.5.1.3 and higher) update-script works again with ClockworkMod Recovery 2.5.1.8..... It was JUST 2.5.13 that it had problems in. Edited December 25, 2010 by Sebastian404
Guest WellBeing Posted December 25, 2010 Report Posted December 25, 2010 Hello all :( Today, in the morning, the first dump was uploaded from the 00Z3, and I jumped to create You the first Froyo ROM from this stable build! For now, as my device awaits a service repair, I can't flash it, that's why I ask You, to please, use DDMS to debug it! Current features: - 003Z dump (/system, and boot too) - update-script (does not work with CWM 2.5.1.3 and higher) Changes: - Dalvik VM Heap increased from 24MB to 32MB Download link: (Please, only download if you really know how to debug, use DDMS, post debug logs, and help me debug it! I don't want my host to disable my account due to too much downloads, I hope you understand! As soon as there will be a stable build, I will upload it to some sharing sites, then you can freely grab it!) http://fonix232.co.cc/rom/index.php?dir=%2...yoBlade_0.1.zip Debug instructions: - Use DDMS! Helps a lot! - Post the problem logs only! - If you can, suggest the fix too! So Fast！！ Great！
Guest fonix232 Posted December 25, 2010 Report Posted December 25, 2010 update-script works again with ClockworkMod Recovery 2.5.1.8..... Okay, thanks for it :(
Guest Rem1x Posted December 25, 2010 Report Posted December 25, 2010 (edited) DISREGARD ME, I'M A NUMPTY. Edited December 25, 2010 by Rem1x
Guest superkryo Posted December 25, 2010 Report Posted December 25, 2010 update-script works again with ClockworkMod Recovery 2.5.1.8..... It was JUST 2.5.13 that it had problems in. It would be really helpful if you could update the kernel for ext3 support.
Guest Rem1x Posted December 25, 2010 Report Posted December 25, 2010 Syntax error in update script? - CW 2.5.1.7
Guest fonix232 Posted December 25, 2010 Report Posted December 25, 2010 It would be really helpful if you could update the kernel for ext3 support. First get the build itself working, then ask kalt_kaffee for a kernel :(
Guest Sebastian404 Posted December 25, 2010 Report Posted December 25, 2010 Syntax error in update script? - CW 2.5.1.7 Where did you get 2.5.1.7 from?
Guest Rem1x Posted December 25, 2010 Report Posted December 25, 2010 Where did you get 2.5.1.7 from? Did I say that? I meant 2.5.1.8. Mind is all over the place this morning.
Guest Sebastian404 Posted December 25, 2010 Report Posted December 25, 2010 Did I say that? I meant 2.5.1.8. Mind is all over the place this morning. Rem1x, GO BACK TO BED! :(
Guest naxuu Posted December 25, 2010 Report Posted December 25, 2010 update-script works again with ClockworkMod Recovery 2.5.1.8..... It was JUST 2.5.13 that it had problems in. Installation not work for me. I have ClockworkMod Recovery 2.5.0.9. Installation end by error . -Installing: SDCARD:roms/FroyBlade_0.1.zip Finding update package... opening update package... Installing update... E:Syntax error in update script Installation aborted.
Guest Rem1x Posted December 25, 2010 Report Posted December 25, 2010 Rem1x, GO BACK TO BED! :( Must get new leak working, damn it ;) Feel like MD5ing it for me? (wrote MD4 there, first time, *facepalm*)
Guest abbas_sheikh Posted December 25, 2010 Report Posted December 25, 2010 Syntax error in update script for me too. v 2.5.1.8
Guest Rem1x Posted December 25, 2010 Report Posted December 25, 2010 (edited) # fonix232's forst Froyo Build, based on the 00Z3 dump show_progress 0.8 20 format SYSTEM: copy_dir PACKAGE:system SYSTEM: symlink iwmulticall SYSTEM:bin/iwconfig symlink iwmulticall SYSTEM:bin/iwevent symlink iwmulticall SYSTEM:bin/iwgetid symlink iwmulticall SYSTEM:bin/iwlist symlink iwmulticall SYSTEM:bin/iwpriv symlink iwmulticall SYSTEM:bin/iwspy symlink toolbox SYSTEM:bin/cat symlink toolbox SYSTEM:bin/chmod symlink toolbox SYSTEM:bin/chown symlink toolbox SYSTEM:bin/cmp symlink toolbox SYSTEM:bin/date symlink toolbox SYSTEM:bin/dd symlink toolbox SYSTEM:bin/df symlink toolbox SYSTEM:bin/dmesg symlink toolbox SYSTEM:bin/getevent symlink toolbox SYSTEM:bin/getprop symlink toolbox SYSTEM:bin/hd symlink toolbox SYSTEM:bin/id symlink toolbox SYSTEM:bin/ifconfig symlink toolbox SYSTEM:bin/iftop symlink toolbox SYSTEM:bin/insmod symlink toolbox SYSTEM:bin/ioctl symlink toolbox SYSTEM:bin/ionice symlink toolbox SYSTEM:bin/kill symlink toolbox SYSTEM:bin/ln symlink toolbox SYSTEM:bin/log symlink toolbox SYSTEM:bin/ls symlink toolbox SYSTEM:bin/lsmod symlink toolbox SYSTEM:bin/mkdir symlink toolbox SYSTEM:bin/mount symlink toolbox SYSTEM:bin/mv symlink toolbox SYSTEM:bin/nandread symlink toolbox SYSTEM:bin/netstat symlink toolbox SYSTEM:bin/newfs_msdos symlink toolbox SYSTEM:bin/notify symlink toolbox SYSTEM:bin/printenv symlink toolbox SYSTEM:bin/ps symlink toolbox SYSTEM:bin/reboot symlink toolbox SYSTEM:bin/renice symlink toolbox SYSTEM:bin/rm symlink toolbox SYSTEM:bin/rmdir symlink toolbox SYSTEM:bin/rmmod symlink toolbox SYSTEM:bin/route symlink toolbox SYSTEM:bin/schedtop symlink toolbox SYSTEM:bin/sendevent symlink toolbox SYSTEM:bin/setconsole symlink toolbox SYSTEM:bin/setprop symlink toolbox SYSTEM:bin/sleep symlink toolbox SYSTEM:bin/smd symlink toolbox SYSTEM:bin/start symlink toolbox SYSTEM:bin/stop symlink toolbox SYSTEM:bin/sync symlink toolbox SYSTEM:bin/top symlink toolbox SYSTEM:bin/umount symlink toolbox SYSTEM:bin/vmstat symlink toolbox SYSTEM:bin/watchprops symlink toolbox SYSTEM:bin/wipe show progress 0.1 10 set_perm_recursive 0 0 0755 0644 SYSTEM: set_perm_recursive 0 2000 0755 0755 SYSTEM:bin set_perm 0 3003 06755 SYSTEM:bin/ip set_perm 0 3003 02750 SYSTEM:bin/netcfg set_perm 0 3004 02755 SYSTEM:bin/ping set_perm_recursive 1002 1002 0755 0440 SYSTEM:etc/bluez set_perm 0 0 0755 SYSTEM:etc/bluez set_perm 1002 1002 0440 SYSTEM:etc/dbus.conf set_perm 1014 2000 0550 SYSTEM:etc/dhcpcd/dhcpcd-run-hooks set_perm 0 2000 0550 SYSTEM:etc/init.goldfish.sh set_perm 0 0 06755 SYSTEM:bin/su symlink /system/bin/su SYSTEM:xbin/su set_perm_recursive 0 0 0755 0555 SYSTEM:etc/ppp show_progress 0.1 10 write_raw_image PACKAGE:boot.img BOOT: Anyone one got some idea on how to fix it? Edited December 25, 2010 by Rem1x
Guest superkryo Posted December 25, 2010 Report Posted December 25, 2010 First get the build itself working, then ask kalt_kaffee for a kernel :( That will be great! Actually I was referring to Seb's clockwork recovery, which does not backup ext3.
Guest fonix232 Posted December 25, 2010 Report Posted December 25, 2010 (edited) Working on the fix, the dump contained the symlinks too, that was the problem :S Until someone wants to shorten the original set_perm system, it will be a looooong install... Edited December 25, 2010 by fonix232
Guest Rem1x Posted December 25, 2010 Report Posted December 25, 2010 Working on the fix, the dump contained the symlinks too, that was the problem :S Until someone wants to shorten the original set_perm system, it will be a looooong install... Can we just remove the Symlinks from that script?
Guest fonix232 Posted December 25, 2010 Report Posted December 25, 2010 Can we just remove the Symlinks from that script? Nope, as afaik the system will not recognize the "old" file-y symlinks, only if they were made in the file system itself. And I've removed the symlink files from /system/bin, and added the proper set_perm stuff. Sorry for this, I'm a bit disoriented now, gonna have a date on wednesday and I am pretty anxious because of it, and also of this Froyo too :S
Guest Rem1x Posted December 25, 2010 Report Posted December 25, 2010 Nope, as afaik the system will not recognize the "old" file-y symlinks, only if they were made in the file system itself. And I've removed the symlink files from /system/bin, and added the proper set_perm stuff. Sorry for this, I'm a bit disoriented now, gonna have a date on wednesday and I am pretty anxious because of it, and also of this Froyo too :S Ok, this date is much more important. We need pictures. Info. Facebook. Number. Addre- Uh. Good luck, mate :(
Guest fonix232 Posted December 25, 2010 Report Posted December 25, 2010 Give it five minutes, uploading the (hopefully) fixed version!
Guest Jekle Posted December 25, 2010 Report Posted December 25, 2010 Give it five minutes, uploading the (hopefully) fixed version! What are the known Problems fonix?
Guest fonix232 Posted December 25, 2010 Report Posted December 25, 2010 (edited) What are the known Problems fonix? Currently? The update-script itself :( EDIT: new version up! Edited December 25, 2010 by fonix232
Guest Sebastian404 Posted December 25, 2010 Report Posted December 25, 2010 Working on the fix, the dump contained the symlinks too, that was the problem :S Until someone wants to shorten the original set_perm system, it will be a looooong install... There is another half to ROM Dump, that does all that automatically, , but since it is a HORRIBLE HORRIBLE bash script with lots of nasty hacks I'm too embarrassed to let it out into the open :(
Guest abbas_sheikh Posted December 25, 2010 Report Posted December 25, 2010 Currently? The update-script itself :( EDIT: new version up! How come the size is reduced from 140+ to 87MB?
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now