r6 install problems

[Guest griff_dai]

I have downloaded the USB Folder and I have the following device showing as up to date:

NVIDIA USB boot-recovery driver for mobile devices

tried to update the driver as per instructions and it says its up to date?

(also have an Android Device showing but at the top of the Device Manager tree and not as part of the USB tree as with the previous install)

when I try then to run the update from the: install-windows.bat

all I see is a command box flash up and disappear and nothing happens???

when I double click the install-windows.bat a command box opens and nothing happens.

what the hell am I doing wrong, was running the previous version of Paul's rom with performance pack no probs.......

Windows 64bit

Help appreciated....... of to play on the 360 and have some beer so will keep on eye on any advice on my Vega if an when anyone can fig out what I've done wrong!

Cheers :(

[Guest arad85]

Sounds like you don't have debugging turned on on the Vega

[Guest griff_dai]

Sounds like you don't have debugging turned on on the Vega

It is?????

[Guest Dayzee]

Please ignore me if this is obvious, its just with you saying you double clicked on the install-windows.bat file, I thought you may not be using adb properly

You need to do this via adb in a command window

Open a command prompt window and change the directory to be where you unzipped all your files from the update. in mine, I put them in a file called vega in root of my c drive, so I type

cd C:\\vega\

Then I type

adb-windows devices

(just to check my device is connected and seen by adb - should return with a device number showing, if not, drivers are wrong)

Once that works, then you type

install-windows.bat

and away it all goes. Its important that all the files in the zip are in the root of wherever you point - I unzipped then moved all the contents to my vega folder because I couldn't be bothered to type out the long folder file name :(

Hope that helps, and if its granny sucking eggs time, my apols ;) xx

Dayz xx

[Guest T4ylor]

Please ignore me if this is obvious, its just with you saying you double clicked on the install-windows.bat file, I thought you may not be using adb properly

You need to do this via adb in a command window

Open a command prompt window and change the directory to be where you unzipped all your files from the update. in mine, I put them in a file called vega in root of my c drive, so I type

cd C:\\vega\

Then I type

adb-windows devices

(just to check my device is connected and seen by adb - should return with a device number showing, if not, drivers are wrong)

Once that works, then you type

install-windows.bat

and away it all goes. Its important that all the files in the zip are in the root of wherever you point - I unzipped then moved all the contents to my vega folder because I couldn't be bothered to type out the long folder file name :(

Hope that helps, and if its granny sucking eggs time, my apols ;) xx

Dayz xx

Everyone of the updates I have done so far is by double clicking on the windows.bat file.

Maybe a silly thing but you have got it in USB slave havent you?

[Guest griff_dai]

Please ignore me if this is obvious, its just with you saying you double clicked on the install-windows.bat file, I thought you may not be using adb properly

You need to do this via adb in a command window

Open a command prompt window and change the directory to be where you unzipped all your files from the update. in mine, I put them in a file called vega in root of my c drive, so I type

cd C:\\vega\

Then I type

adb-windows devices

(just to check my device is connected and seen by adb - should return with a device number showing, if not, drivers are wrong)

Once that works, then you type

install-windows.bat

and away it all goes. Its important that all the files in the zip are in the root of wherever you point - I unzipped then moved all the contents to my vega folder because I couldn't be bothered to type out the long folder file name :(

Hope that helps, and if its granny sucking eggs time, my apols ;) xx

Dayz xx

I will try in the morning and will let yahoo know

[Guest griff_dai]

I will try again in the morning as left it for now.

Never had a problem with the official update and Paul's R4 but this is strange, will try again with what's suggested above. USB slave,is that the same as USB debugging? I assumed that when in recovery I would see the same USB android device indicator as the r4 rom.

The nvidia thing has thrown me,I will move the rom to the C drive and try again.

Cheers so far for the help :(

[Guest T4ylor]

I will try again in the morning as left it for now.

Never had a problem with the official update and Paul's R4 but this is strange, will try again with what's suggested above. USB slave,is that the same as USB debugging? I assumed that when in recovery I would see the same USB android device indicator as the r4 rom.

The nvidia thing has thrown me,I will move the rom to the C drive and try again.

Cheers so far for the help :(

I was thinking that I read somewhere that you had installed the USB switcher but after checking I must have been wrong so forget the USB slave because you will have not changed it.

All I can do is go through exactly what I did and do to update mine. It’s not intended to try and teach you to suck eggs but hopefully might help you see if you have missed anything.

1, First of all download your baked rom and extract it to your desktop or where ever you normally put your updates (no need to extract anything else)

2, Ensure that you have debugging enabled on your Vega

3, connect your Vega via the usb cable to your computer and ensure that the Vega is switched on (you should hear you computer make a sound if you have the sound switched on)

4, open the extracted r6 folder and double click the install-windows.bat file

Hopefully this should now install the r6.

[Guest griff_dai]

I was thinking that I read somewhere that you had installed the USB switcher but after checking I must have been wrong so forget the USB slave because you will have not changed it.

All I can do is go through exactly what I did and do to update mine. It’s not intended to try and teach you to suck eggs but hopefully might help you see if you have missed anything.

1, First of all download your baked rom and extract it to your desktop or where ever you normally put your updates (no need to extract anything else)

2, Ensure that you have debugging enabled on your Vega

3, connect your Vega via the usb cable to your computer and ensure that the Vega is switched on (you should hear you computer make a sound if you have the sound switched on)

4, open the extracted r6 folder and double click the install-windows.bat file

Hopefully this should now install the r6.

That is what I did?

The Vega connection throws up the Nvidia connection in the USB tree,I know I'm in recovery and I get that command box open and close before it does anything, double click and I get a command box open and it don't do owt,do I need to type a command into that box?

Edited December 30, 2010 by griff_dai

[Guest griff_dai]

I take it that the USB for r6 is the same as the last build?

Why do I get the Nvidia driver showing in recovery?

Anyhow, bedtime now........

Catch ya all tomorrow

[Guest griff_dai]

I was thinking that I read somewhere that you had installed the USB switcher but after checking I must have been wrong so forget the USB slave because you will have not changed it.

All I can do is go through exactly what I did and do to update mine. It’s not intended to try and teach you to suck eggs but hopefully might help you see if you have missed anything.

1, First of all download your baked rom and extract it to your desktop or where ever you normally put your updates (no need to extract anything else)

2, Ensure that you have debugging enabled on your Vega

3, connect your Vega via the usb cable to your computer and ensure that the Vega is switched on (you should hear you computer make a sound if you have the sound switched on)

4, open the extracted r6 folder and double click the install-windows.bat file

Hopefully this should now install the r6.

Just realised, in your steps you don't mention the recovery steps,do I need to do that??

[Guest T4ylor]

That is what I did?

The Vega connection those up the Nvidia connection in the USB tree,I know I'm in recovery and I get that command box open and close before it does anything, double click and I get a command box open and it don't do owt,do I need to type a command into that box?

Maybe worth trying it again just to make sure that each step is followed exactly. When you say recovery you’re not going through the 2 second button sequence are you? I have never installed any of the rom by typing anything into the command bow although others have. I know that some people right click of the .bat file and run as administrator so you could give that a try.

[Guest griff_dai]

Maybe worth trying it again just to make sure that each step is followed exactly. When you say recovery you’re not going through the 2 second button sequence are you? I have never installed any of the rom by typing anything into the command bow although others have. I know that some people right click of the .bat file and run as administrator so you could give that a try.

Yes been putting it into recovery

[Guest T4ylor]

Yes been putting it into recovery

There is your problem then. dont put it in to recovery but just have switched on.

[Guest griff_dai]

There is your problem then. dont put it in to recovery but just have switched on.

Top work, its done....... God your a star :(

Fooking love this forum.... Cheers fella ;)

Back to me beer and Caddyshack ;)

[Guest T4ylor]

Top work, its done....... God your a star :(

Fooking love this forum.... Cheers fella ;)

Back to me beer and Caddyshack ;)

your welcome mate and enjoy