29/Dec [GUIDE] Fix the Blue Tint problem after flashing Superboot on TFT Device

[Guest Joey Scarf]

what is the outputted MD5

i can't get past that stage it just says error

joey

Edited January 25, 2011 by Joey Scarf

[Guest ThePilgrim]

Hello,

I'm desperate already. Im so newbie to these android and whatever. I was able to superboot it, but sure something had to go wrong n got that blue tint problem... I've read the threads on how to make all go back to normal, but I just can't pass through the stage of installing the ClockworkMod Recovery - 2.5.1.8.... I just do all the steps and all. but it doesn't works... And Always that FTM screen after rebooting with power+down key...

Well I have a mac 10.6.4... been using things like: Vanessa-Duques-iMac:fastboot mariapappoila$ ./fastboot-mac flash recovery recovery-clockwork-2.5.1.8-blade.img.. And the same error comes. "error: cannot load 'boot.blade.superboot.mcri.r3.img"

The recovery file is on the right place inside the fastboot file on Desktop...

I can't get it...

Can someone help me/guide me in a really newbie way so that i can have it recovered please?

[Guest jurrasstoil]

@kallt_kaffe

i might have found something useful that might have something to do with the blue tint on LEAD Display devices.

I compared the dmesg outputs from my no-tint 2.1 with your JJ RLS6 with tint.

[1: swapper]msm_fb_probe: phy_Addr = 0x61aa000 virt = 0xadc00000

[1: swapper]MDP HW Base phy_Address = 0xaa200000 virt = 0xad900000

[1: swapper]spi_init

[1: swapper]!truly id is 0xffff

[1: swapper]oled id is 0xffff

[1: swapper][ZGC]:init_lcd_proc

[1: swapper]lcdc config

[1: swapper]spi_init

[1: swapper]![ZYF] lcdc_set_bl level=5, 1

[1: swapper][LY] send_bkl_address

[1: swapper][LY] send_bkl_data

[1: swapper]Console: switching to colour frame buffer device 60x50

[1: swapper]FrameBuffer[0] 480x800 size=1536000 bytes is registered successfully!

[1: swapper]LUYA!!!!max=384000

[1: swapper]LUYA!!!!count=768072

[1: swapper][ZGC]:LcdPanleID = 42

[1: swapper]Registered led device: lcd-backlight

[1: swapper]msm_fb_probe: phy_Addr = 0x6078000 virt = 0xade00000

[1: swapper]MDP HW Base phy_Address = 0xaa200000 virt = 0xae000000

[1: swapper]spi_init

[1: swapper]!truly id is 0xffff

[1: swapper]oled id is 0xffff

[1: swapper][ZGC]:init_lcd_proc

[1: swapper]lcdc config

[1: swapper]spi_init

[1: swapper]![ZYF] lcdc_set_bl level=5, 1

[1: swapper][LY] send_bkl_address

[1: swapper][LY] send_bkl_data

[1: swapper]FrameBuffer[0] 480x800 size=1536000 bytes is registered successfully!

[1: swapper][ZGC]:LcdPanleID = 42

[1: swapper]Registered led device: lcd-backlight

It seems like 2.1 changes the colour frame buffer device while initialising the display, but both dmesg (2.1 and 2.2) start with this "[0: swapper]Console: colour dummy device 80x30" before initialising the display.

[Guest kleale]

Hello, I have the same blue tint on SF with LEAD display. What about any news or ideas to solve this problem?

[Guest rhorno13]

Hi

I append here, because the problem is similar.

It came after flashing. If I insert the SIM card, the phone works, rings but it can't answer

Maybe someone already experienced the symptoms?