Guest mslady Posted January 16, 2011 Report Posted January 16, 2011 I was using the QDLTool now it's just dead! I was stuck on the stock 1.6 so I wanted to go ahead & upgrade to 2.2. I was using the QDLTool (2.7.4.8) then got only soooo far before I had to pull the battery and try again... That only happened twice, now my Streak won't power on at all and isn't recognized by my usb!!! I'm running Windows XP SP3, had all the drivers installed... I don't know what to do! I'm attaching the last log file I was able to save before it died... Someone, if you can help, please do! Thanks in advance! Tyá ###QDLTool: M 2.7.4.8, build ID: 1.301.20101022, time stamp: Sat Jan 15 14:25:53 2011 Check image DBL: C:\Streak\repairtool\images\dbl.mbn ... Check image FSBL: C:\Streak\repairtool\images\fsbl.mbn ... Check image OSBL: C:\Streak\repairtool\images\osbl.mbn ... Check image AMSS: C:\Streak\repairtool\images\amss.mbn ... Check image DSP1: C:\Streak\repairtool\images\dsp1.mbn ... Check image APPSBL: C:\Streak\repairtool\images\appsboot.mbn ... Check image DT: C:\Streak\repairtool\images\DT.img ... Check image boot.img: C:\Streak\repairtool\images\boot.img ... Check image system.img: C:\Streak\repairtool\images\system.img ... Check image userdata.img: C:\Streak\repairtool\images\userdata.img ... Check image recovery.img: C:\Streak\repairtool\images\recovery.img ... Check image logfilter.img: C:\Streak\repairtool\images\logfilter.img ... Check image Region: C:\Streak\repairtool\images\RC_us.img ... Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile Check images ok Download in speedup way Open COM port success OSBL version: 12-324012-AUSB1AM-09 osbl.mbn version: Baseband image version: M8650BAUSB1AM5035SIGN Check device and image is Austin Baseband image version: M8650BAUSB1AM5035SIGN Check device and image is Austin Open COM port success Check Secure Boot is enabled #Set Fast Boot Flag success Open COM port success Test communication success Check Secure Boot is enabled #DBL to DDR success #FSBL to DDR success #OSBL to DDR success #DT to DDR success #backup FSBL to DDR success Run HEX success Check Secure Boot is enabled Streaming hello success Send Security mode success Download partition table success #Download DBL success #Download FSBL success #Download OSBL success #Download DT success #Download backup FSBL success Erase EFS2 success Wait for rebooting ....... ok Wait for modem set up ...... Wait for ADB device ......... ERROR[D2]: wait ADB fastboot mode timeout! Please check that device is exist and driver is properly installed. Download Fail! - 2011/01/15 14:26:41 Elapsed Time: 47.88 sec
Guest aweAMsome Posted January 16, 2011 Report Posted January 16, 2011 (edited) Look to me like you got driver issue (ADB). Prior to running QDL tool, with phone power off, press and hold VOL up button then press Power ON button, release both buttons after 1 sec and then plug in your data cable. Now check your computer device manager for driver requirement, if so then install and then try QDL tool repair again. Else I would suggest try re-install SDK Setup again. Edited January 16, 2011 by aweAMsome
Guest mslady Posted January 16, 2011 Report Posted January 16, 2011 I don't think you understand what I'm saying. My Streak displays NO SIGNS OF POWER, USB does not recognize/acknowledge it's plugged in at all, and I've used every port on my tower. I'm wondering if I will be able to salvage this thing before I just give up and return it to Dell for another unit.
Guest Dunhamzzz Posted January 16, 2011 Report Posted January 16, 2011 I don't think you understand what I'm saying. My Streak displays NO SIGNS OF POWER, USB does not recognize/acknowledge it's plugged in at all, and I've used every port on my tower. I'm wondering if I will be able to salvage this thing before I just give up and return it to Dell for another unit. You won't be able to return it if you've been messing around with QDL tool.... You'll have to blag it some how.
Guest aweAMsome Posted January 16, 2011 Report Posted January 16, 2011 (edited) Mine Dell Streak was also the same and can't be put into fastboot mode, recovery mode and doesn't power up at first (no screen display doesn't mean no power!) but I was able to recovery and now running Steve Froyo latest Android version. However it seem to me as though you had already given up! good luck. Edited January 16, 2011 by aweAMsome
Guest mslady Posted January 16, 2011 Report Posted January 16, 2011 I haven't given up yet, that's why I'm here! Lol... I'm trying to figure out how to get this thing to power up again so that I can try to recover it... Any tips?
Guest mslady Posted January 16, 2011 Report Posted January 16, 2011 (edited) ....... Edited January 16, 2011 by mslady
Guest Kohawk Posted January 16, 2011 Report Posted January 16, 2011 http://webchat.freenode.net/ channel #dellstreak is your best bet.
Guest mslady Posted January 16, 2011 Report Posted January 16, 2011 http://webchat.freenode.net/ channel #dellstreak is your best bet. Thanks Kohawk, was there last night, will try again...
Guest mslady Posted January 16, 2011 Report Posted January 16, 2011 Alright, I gave it my all, turning it in & getting a replacement! Thanks for any & all who assisted me. ;)
Guest vi3txdr34m5 Posted January 17, 2011 Report Posted January 17, 2011 u could pull battery plug phone in without batt and hold pwr and see if it turns on...... and the put battery back in when it restarted .... mine did this
Guest vi3txdr34m5 Posted January 17, 2011 Report Posted January 17, 2011 u could pull battery plug phone in without batt and hold pwr and see if it turns on...... and the put battery back in when it restarted .... mine did this
Guest mslady Posted February 8, 2011 Report Posted February 8, 2011 I FINALLY DID IT! Lol, "yay, me!" Although I killed my last Streak (the internal memory was corrupted,) Dell sent me another one. I did the test on the device to see if its internal memory card was corrupted & it gave me a "Passed" result, so I went ahead w/ the most updated version of QDLTool (SOOOO crucial!) & commenced the process of updating it from 1.6 to 2.2. I'd like to thank everyone who offered their assistance in the matter, you all are GREATLY appreciated! Tyá
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now