Guest Mr. Extreme Posted May 19, 2011 Report Share Posted May 19, 2011 Thanx for the answer. Earlier today - before reading the post - I installed "t&l Gingerbread Edition .14" and it works like a charm. It is based on 2.2 . Is it good as a basis for this ROM, or should it be a ROM from the aforementioned list? Link to comment Share on other sites More sharing options...
Guest HustlinDaily Posted May 19, 2011 Report Share Posted May 19, 2011 Would be best if you flash the 2.2 bin and then flash T&L on top (infact, pretty much every Froyo/Gingerbread ROM work best when flashed onto a Froyo bin). The bin files on that page are either leaks (older ones) or extracted from Acer's website (newer ones). The official ones (newer ones) are designed for Liquid E but the 256MB versions are slightly modified (I believe one line changed or something like that) to work with the A1. Works great (except Froyo on a low memory device can be a pain at times). Hope that helps. Link to comment Share on other sites More sharing options...
Guest Mr. Extreme Posted May 19, 2011 Report Share Posted May 19, 2011 I flashed the T&L on top of my vanilla 2.1, and works perfectly (as far as I see now), but thanx for the tip. Link to comment Share on other sites More sharing options...
Guest kasd Posted May 20, 2011 Report Share Posted May 20, 2011 (edited) I can't connect to WiFi! Even if I can with manual IP. Can this problem be fixed? same problem here >_> Edited May 20, 2011 by kasd Link to comment Share on other sites More sharing options...
Guest morfy Posted May 21, 2011 Report Share Posted May 21, 2011 (edited) edit: maybe solved Edited May 21, 2011 by morfy Link to comment Share on other sites More sharing options...
Guest thepasto Posted May 26, 2011 Report Share Posted May 26, 2011 (edited) CM7.1-1.05.26.11-RC1-Liquid Wipe all before install it. Flash with malez recovery no sign check - new sensors libs included. (compass not working and some problems with p-sensor) - some kernel fixes - based on cm sources Download http://www.multiupload.com/YWJFXUK49B PATCHES: OLDSENSORS (ACER SENSOR LIBS) flash only if you want old acer sensors libs (compass working, some workarounds maybe are needed to get l-sensor and p-sensor working) DON'T WIPE. Flash with malez recovery no sign check Download http://www.multiupload.com/A9T9M4U2C0 P.S. if you have problems with proximity sensor download Sanity from market. BACK TO NEWSENSORS Flash only if you have tried oldsensor patch (above) and you want to go back to new sensor DON'T WIPE. Flash with malez recovery no sign check Download http://www.multiupload.com/6F09OTU66A Enjoy :P Edited May 26, 2011 by thepasto Link to comment Share on other sites More sharing options...
Guest LSteam Posted May 26, 2011 Report Share Posted May 26, 2011 THANKS! Downloading... =) Link to comment Share on other sites More sharing options...
Guest kaerry Posted May 26, 2011 Report Share Posted May 26, 2011 CM7.1-1.05.26.11-RC1-Liquid Wipe all before install it. Flash with malez recovery no sign check - new sensors libs included. (compass not working and some problems with p-sensor) Thepasto why you use new sensor libs if they have some problem? Link to comment Share on other sites More sharing options...
Guest thepasto Posted May 26, 2011 Report Share Posted May 26, 2011 Thepasto why you use new sensor libs if they have some problem? For me p-sensor works fine with it.. No need for compass.. They can be easily improved for me are better.. But if you want oldsensors now just flash a zip :P Not so bad!! Link to comment Share on other sites More sharing options...
Guest LSteam Posted May 26, 2011 Report Share Posted May 26, 2011 some workarounds maybe are needed to get l-sensor and p-sensor working) what do you mean? :P Link to comment Share on other sites More sharing options...
Guest thepasto Posted May 26, 2011 Report Share Posted May 26, 2011 what do you mean? :P I mean sanity for p-sensor (if it doesn't work out of the box), and maybe you need to enable "light sensor filter" in cmsettings to get l-sensor working Link to comment Share on other sites More sharing options...
Guest kaerry Posted May 26, 2011 Report Share Posted May 26, 2011 With old sensor libs the rom is ok and faster, thank you thepasto Link to comment Share on other sites More sharing options...
Guest LSteam Posted May 26, 2011 Report Share Posted May 26, 2011 thanks :P Link to comment Share on other sites More sharing options...
Guest kaerry Posted May 26, 2011 Report Share Posted May 26, 2011 (edited) EDIT: now my liquid no longer in landscape :-( EDIT2: and after a reboot magnetometer is lost... mmm... reflash Edited May 26, 2011 by kaerry Link to comment Share on other sites More sharing options...
Guest Dr. Robert Chase Posted May 26, 2011 Report Share Posted May 26, 2011 EDIT: now my liquid no longer in landscape :-( launcher2 doesn't support landscape. Link to comment Share on other sites More sharing options...
Guest kenelm Posted May 26, 2011 Report Share Posted May 26, 2011 Just flashed CM7.1-1.05.26.11-RC1-Liquid so far I found that softkey has problem hmm .. annoying Link to comment Share on other sites More sharing options...
Guest Small_Hacker Posted May 26, 2011 Report Share Posted May 26, 2011 CM7.1-1.05.26.11-RC1-Liquid Wipe all before install it. Flash with malez recovery no sign check - new sensors libs included. (compass not working and some problems with p-sensor) - some kernel fixes - based on cm sources Download http://www.multiupload.com/YWJFXUK49B PATCHES: OLDSENSORS (ACER SENSOR LIBS) flash only if you want old acer sensors libs (compass working, some workarounds maybe are needed to get l-sensor and p-sensor working) DON'T WIPE. Flash with malez recovery no sign check Download http://www.multiupload.com/A9T9M4U2C0 P.S. if you have problems with proximity sensor download Sanity from market. BACK TO NEWSENSORS Flash only if you have tried oldsensor patch (above) and you want to go back to new sensor DON'T WIPE. Flash with malez recovery no sign check Download http://www.multiupload.com/6F09OTU66A Enjoy :P is this version being a improvement of the page 1's version because the page 1 rom is the best of cm7 for liquid i tried Link to comment Share on other sites More sharing options...
Guest kaerry Posted May 26, 2011 Report Share Posted May 26, 2011 Tested: after a reboot with patch for old libs the magnetometer and portrait/landscape sensor stop working Link to comment Share on other sites More sharing options...
Guest Dr. Robert Chase Posted May 26, 2011 Report Share Posted May 26, 2011 Tested: after a reboot with patch for old libs the magnetometer and portrait/landscape sensor stop working maybe you have special device) Link to comment Share on other sites More sharing options...
Guest kaerry Posted May 26, 2011 Report Share Posted May 26, 2011 maybe you have special device) Cinic boy... :P no, there is a problem with this new boot.img from thepasto, i flashed the boot.img from cm7 1.2.18 and now i have a really full working cm 7.1 Link to comment Share on other sites More sharing options...
Guest Dr. Robert Chase Posted May 26, 2011 Report Share Posted May 26, 2011 i flashed the boot.img from cm7 1.2.18 and now i have a really full working cm 7.1 WOW great! good work! Link to comment Share on other sites More sharing options...
Guest Small_Hacker Posted May 26, 2011 Report Share Posted May 26, 2011 (edited) compass workable with old sensor!! but after reboot..... it's not workable again.. and auto rotate is also failed.. Edited May 26, 2011 by Small_Hacker Link to comment Share on other sites More sharing options...
Guest Small_Hacker Posted May 26, 2011 Report Share Posted May 26, 2011 Tested: after a reboot with patch for old libs the magnetometer and portrait/landscape sensor stop working same here!!!!!!!!!!!! :P Link to comment Share on other sites More sharing options...
Guest peixinho Posted May 26, 2011 Report Share Posted May 26, 2011 What about Led Notifications as we have on Nighty Build? is it possible to have on this one? It is very usefull! It really seems a good Rom, thanks! Link to comment Share on other sites More sharing options...
Guest Dr. Robert Chase Posted May 26, 2011 Report Share Posted May 26, 2011 What about Led Notifications as we have on Nighty Build? is it possible to have on this one? It is very usefull! It really seems a good Rom, thanks! take CMParts.apk from nightly and replace whith same apk in kang. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now