parrott ck3000 problems

[Guest omhaigh]

Hi,

I've managed to pair my SF to the parrott ck3000 that I've had installed in my car for the last few years - but I cannot get it to connect! I cannot see any menu to start the connection, so I assume it should be automatic?

Previously using a Nokia e71 I would simply activate Bluetooth on the phone and then start the ignition, shortly afterwards the phone was connected and ready to use.

I'm using the modaco r12 firmware on the SF, and 5,10 on the ck3000.

Thanks in advance

[Guest worto03]

Hi,

I've managed to pair my SF to the parrott ck3000 that I've had installed in my car for the last few years - but I cannot get it to connect! I cannot see any menu to start the connection, so I assume it should be automatic?

Previously using a Nokia e71 I would simply activate Bluetooth on the phone and then start the ignition, shortly afterwards the phone was connected and ready to use.

I'm using the modaco r12 firmware on the SF, and 5,10 on the ck3000.

Thanks in advance

Check out Limbo70's instructions on this thread - I had problems with the parrot ck3000 with it not connecting - I eventually got it to connect but it would never stop trying to sync the phonebook and while it would ring via the carkit the voice was then just via the phone once answered? but after following the instructions quoted below from the thread I linked to it all works fine now :)

What worked for me was the following;

- Unpair both, the phone and the bluetooth set in your car

- Download and install "Bluetooth File Transfer" from the market

- pair again, this time via "Bluetooth File Transfer" (first 2buttons on)

As said, it worked for me with a Parrot CK3100.

I'm on the same ROM as you for the San Fran too. Oh and your thread is a bit unclear - you do need to pair in once manually and enter the pin which should be 1234 after this it will connect automatically once you start the car.

Edited April 18, 2011 by worto03

[Guest MrMirUK]

I tried the solution above but failed. This is probably because i have the ck3000. Anyone found another solution?