GUIDE FROM ANY OFFICIAL 2.2 TO 2.2 AT&T

[Guest ali_alex]

FIRST ROOT YOUR DEVICE WITH SUPER ONE CLICK

Extract this file

Use Root Explorer from the market to then mount the /system partition with r/w permissions.

The first time you run Root Explorer it will ask for superuser permissions, click Allow and then copy recovery-from-boot.p from /sdcard to /system, copy install-recovery.sh from /sdcard to /system/etc, and copy applypatch from /sdcard to /system/bin

Put your Streak into fastboot mode.

put boot.img file in c: where to you have fastboot.exe

From command line type: fastboot -i 0x413c flash boot boot.img

Then type: fastboot -i 0x413c reboot

Once it has booted fully into the Android OS shut it down and go into recovery mode.IF stuck on dell logo dont panic ,remove and reinsert the battery and go into recovery

In recovery select Software upgrade via Update.pkg on SD Card using volume keys and camera button to select. Be patient it will take a while.

If you've tried before,make sure you've removed from sdcard old update.pkg.dec ! keep only update.pkg !

all file are extracted from update.pkg at&t 2.2

file.rar

Edited February 24, 2011 by ali_alex

[Guest billhickle]

FIRST ROOT YOUR DEVICE WITH SUPER ONE CLICK

Extract this file

Use Root Explorer from the market to then mount the /system partition with r/w permissions.

The first time you run Root Explorer it will ask for superuser permissions, click Allow and then copy recovery-from-boot.p from /sdcard to /system, copy install-recovery.sh from /sdcard to /system/etc, and copy applypatch from /sdcard to /system/bin

Put your Streak into fastboot mode.

put boot.img file in c: where to you have fastboot.exe

From command line type: fastboot -i 0x413c flash boot boot.img

Then type: fastboot -i 0x413c reboot

Once it has booted fully into the Android OS shut it down and go into recovery mode.IF stuck on dell logo dont panic ,remove and reinsert the battery and go into recovery

In recovery select Software upgrade via Update.pkg on SD Card using volume keys and camera button to select. Be patient it will take a while.

If you've tried before,make sure you've removed from sdcard old update.pkg.dec ! keep only update.pkg !

all file are extracted from update.pkg at&t 2.2

huh? :huh:

[Guest marvin02]

huh? :huh:

I think this has been posted for those who have 'upgraded on their own' and the official upgrade does not work for them.

ali_alex,

Is this method specific to a carrier?

Thanks

Edited February 24, 2011 by marvin02

[Guest ali_alex]

I think this has been posted for those who have 'upgraded on their own' and the official upgrade does not work for them.

ali_alex,

Is this method specific to a carrier?

Thanks

my device is european unlocked not branded and started from 318 ,but i applied the same method on o2 uk device started from 319 and works on both

[Guest cowballz]

download fps2d from.app store on att 2.2 and post is there version still locked at 30fps? would really like to know if they uncapped it thanks

Edited February 24, 2011 by cowballz

[Guest ali_alex]

download fps2d from.app store on att 2.2 and post is there version still locked at 30fps? would really like to know if they uncapped it thanks

done avg=45 stdev=3.65

[Guest cowballz]

done avg=45 stdev=3.65

Thank u sir !

[Guest billhickle]

I think this has been posted for those who have 'upgraded on their own' and the official upgrade does not work for them.

ali_alex,

Is this method specific to a carrier?

Thanks

please replace all the letters and short hand with details so i can follow better. LOL! Root Explorer or any file explorer?

I am on stock 318 00baseband

[Guest SSMERK]

just so everyone knows that when you upgrade to the official att rom tethering is gone.

[Guest SSMERK]

hey guys i see another issue with this update the upload speed is capped i think i was getting like 150kB with 318 update with this one i am only getting 30kB if im lucky . the 3g signal sucks also when i was on 318 it was much better

[Guest billhickle]

hey guys i see another issue with this update the upload speed is capped i think i was getting like 150kB with 318 update with this one i am only getting 30kB if im lucky . the 3g signal sucks also when i was on 318 it was much better

Please add some clarification to mount, unmount, dismount r/w...steps with clarification please so I dont jack my phone up. To you its clear to me its fuzzy.

[Guest ali_alex]

Please add some clarification to mount, unmount, dismount r/w...steps with clarification please so I dont jack my phone up. To you its clear to me its fuzzy.

when you open root explorer navigate to system. tap it .in system you will see a little box whit mount r/w .tap it.

that it ,now you have permision to over write the file

[Guest leinert1]

I get an error when processing the update file that lists Status 7 and it fails out the update. I tried the steps listed in this post and it still gave me the same error.

[Guest billhickle]

when you open root explorer navigate to system. tap it .in system you will see a little box whit mount r/w .tap it.

that it ,now you have permision to over write the file

Thanks! So to go from 318 to 340 I only need to do this and not all the other steps listed to go back to 1.6 then to 340?

[Guest cowballz]

Why would anyone wanna use the official 2.2 is beyond me?? What do u gain by going official?

[Guest rnj79]

I am also on the 318 release and keep getting the status 7 error. The only way I can get my phone off the logo is to pull the battery and use the QDL tool. It won't boot pass the logo after selecting the update from the sd card so I have to revert back to 318 via QDL to have any function from it. I have never had this much frustration updating on this phone. Why can't it work??

[Guest ali_alex]

Thanks! So to go from 318 to 340 I only need to do this and not all the other steps listed to go back to 1.6 then to 340?

yes

[Guest billhickle]

I am also on the 318 release and keep getting the status 7 error. The only way I can get my phone off the logo is to pull the battery and use the QDL tool. It won't boot pass the logo after selecting the update from the sd card so I have to revert back to 318 via QDL to have any function from it. I have never had this much frustration updating on this phone. Why can't it work??

Same here

[Guest Haroon188]

Worked for me, i was looking for this since official at&t 2.2 came out last month.

well i had 318 unlocked us version and since i am using at&t as my carrier, i wanted to get the official at&t 340 on my unlocked 318 streak and it worked.

thanx buddy

[Guest blairware]

I had this process fail on me, ended up stuck at Dell logo, and could NOT get past if for anything. The reason? I made a mistake that I did not catch until later:

On this step:

then copy recovery-from-boot.p from /sdcard to /system,

I copied the "recovery-from-boot.p" file to the root folder of my device, not system. In doing so, I did not have the correct setup when completing the next steps, and the whole process fell apart. I have read of quite a few success stories using this method, and it could save you a LOT of time:

The moral of the story: Foloow directions closely. If you do get stuck at Dell Logo, you can get out of it by restoring a rom that matches the recovery thats on your device. In my case it was the previous ROM version prior to this proceedure. Anyone who gets stuck there should consider putting back the previous ROM by renaming the image, put it on SD card, and bring up recovery to restore. Then.... THINK - what did you miss?

Hope this helps SOME poor sucker somewhere, sometime...