Guest Blues003 Posted May 27, 2011 Report Share Posted May 27, 2011 N72 fixed will avoid the proximity issue for you. And nothing Blade specific has been done since it to especially warrant running a newer version. :P In what way is overclocking unstable? It's stable for me in N72 and N80-something. If you lower your CPU overclock to minimum (650-ish) and that's stable then overclocking is fine and it's simply that you're overclocking too high. I've not seen any posts about an issue with it since the late 30's. Overclocking became stable around RC4. I could have it at 710 MHz without one single reboot, or at 729 MHz for 3 days until my phone "decided" it was time to reboot. On the newest nightlies, however, simply 691 MHz is enough to make my phone shut down. I do not overclock right now. 600 MHz is enough for my needs. However, it is an instability factor introduced newly. Link to comment Share on other sites More sharing options...
Guest cartoone Posted May 27, 2011 Report Share Posted May 27, 2011 (edited) thanks for the replies guys.. Since I wanted to help my friend remotely.. He don't have any SDK installed, so was thinking how to replicate the below steps Is there a documentation to Install libaudio.so into N67 or any such nightlies.. The only documentation i see is Post3984 adb start-server adb remount adb push libaudio.so /system/lib/ adb chmod 644 /system/lib/libaudio.so adb reboot adb kill-server[/codebox] But can anyone help in producing How to run those steps from Windows 7 machine? and push the file into already existing N67 build Will copying of file into /system/lib/libaudio.so and restarting of the phone work? Edited May 27, 2011 by cartoone Link to comment Share on other sites More sharing options...
Guest Posted May 27, 2011 Report Share Posted May 27, 2011 Will copying of file into /system/lib/libaudio.so and restarting of the phone work? Actually that's how I do it most of the time. You need root access to mount /system in write mode, though. Link to comment Share on other sites More sharing options...
Guest cartoone Posted May 27, 2011 Report Share Posted May 27, 2011 Actually that's how I do it most of the time. You need root access to mount /system in write mode, though. Thanks mate.. I did teach him how to have root access. So let me have a try over the phone Link to comment Share on other sites More sharing options...
Guest statts321 Posted May 27, 2011 Report Share Posted May 27, 2011 Hi all im having problems with wifi it keeps disconnecting itself every couple of mins im using cm7 nightly build 85, is this a known issue and is there a fix/workaround any help appreciated cheers guys. :P Link to comment Share on other sites More sharing options...
Guest bhf Posted May 27, 2011 Report Share Posted May 27, 2011 (edited) Hi all im having problems with wifi it keeps disconnecting itself every couple of mins im using cm7 nightly build 85, is this a known issue and is there a fix/workaround any help appreciated cheers guys. :P Try a static IP. Edited May 27, 2011 by bhf Link to comment Share on other sites More sharing options...
Guest Posted May 27, 2011 Report Share Posted May 27, 2011 Hi all im having problems with wifi it keeps disconnecting itself every couple of mins im using cm7 nightly build 85, is this a known issue and is there a fix/workaround any help appreciated cheers guys. :P Mmm I've read in a few posts that wifi connection was unstable (since N83 or N84 iirc), but I have never experienced it myself... I only connect @home on my personal router, though. Do you try to connect to a hotspot of some kind? Link to comment Share on other sites More sharing options...
Guest statts321 Posted May 27, 2011 Report Share Posted May 27, 2011 (edited) Cheers for the quick reply have already tried that still getting same result phone connects to wifi ok then loses connection after couple of mins before reconnecting it worked ok on n84 Edited May 27, 2011 by statts321 Link to comment Share on other sites More sharing options...
Guest statts321 Posted May 27, 2011 Report Share Posted May 27, 2011 My own wifi at home Link to comment Share on other sites More sharing options...
Guest Posted May 27, 2011 Report Share Posted May 27, 2011 My own wifi at home mmm sorry but nothing smart's coming to my mind... :P did you wipe cache&dalvik when upgrading to n85? what's your wifi policy? Link to comment Share on other sites More sharing options...
Guest statts321 Posted May 27, 2011 Report Share Posted May 27, 2011 mmm sorry but nothing smart's coming to my mind... :P did you wipe cache&dalvik when upgrading to n85? what's your wifi policy? Yeah i,ve wiped cache&dalvik i do it everytime i upgrade to newest nightly. My wifi,s always worked fine uptill now, not to worry its useable ill wait to see if its fixed in upcoming nightlys thanks for all the help cheers guys Link to comment Share on other sites More sharing options...
Guest devilkazuya Posted May 27, 2011 Report Share Posted May 27, 2011 (edited) I am still on gen1 and flashed N72 fixed + converter + libaudio + gapps and its been working fine for 2 days now. I have just downloaded N85 and tried to flash it but i cant get into recovery anymore. If i select reboot > reboot recovery, it just turns the phone off and if i power off and hold Vol - it just keeps restarting itself. any help would be much appreciated. Edited May 27, 2011 by devilkazuya Link to comment Share on other sites More sharing options...
Guest sej7278 Posted May 27, 2011 Report Share Posted May 27, 2011 (edited) I am still on gen1 and flashed N72 fixed + converter + libaudio + gapps and its been working fine for 2 days now. I have just downloaded N85 and tried to flash it but i cant get into recovery anymore. If i select reboot > reboot recovery, it just turns the phone off and if i power off and hold Vol - it just keeps restarting itself. any help would be much appreciated. if you put that lot on then you'll have the clockwordmod recovery that's only for gen2 (3.0.2.7 or later) you'd need to roll back to 3.0.1.4 then you could TPT to gen2 to put n85 on. Edited May 27, 2011 by sej7278 Link to comment Share on other sites More sharing options...
Guest Psyloid Posted May 27, 2011 Report Share Posted May 27, 2011 Cheers for the quick reply have already tried that still getting same result phone connects to wifi ok then loses connection after couple of mins before reconnecting it worked ok on n84 did you installing the blade wifi fix? Link to comment Share on other sites More sharing options...
Guest Taptap1 Posted May 27, 2011 Report Share Posted May 27, 2011 I still use CM7 with converter, because I have no need of the Gen2 features. But the converter was not updated long time so I do not benefit of the new improvements. Do I keep my IMEI updating with TPT to Gen2? Or Is there a way to change IMEI to get the old IMEI? Link to comment Share on other sites More sharing options...
Guest ThrashMan Posted May 27, 2011 Report Share Posted May 27, 2011 (edited) I still use CM7 with converter, because I have no need of the Gen2 features. But the converter was not updated long time so I do not benefit of the new improvements. Do I keep my IMEI updating with TPT to Gen2? Or Is there a way to change IMEI to get the old IMEI? The TPT method has no risk of IMEI corruption, it's easy so just do it! :P Edited May 27, 2011 by ThrashMan Link to comment Share on other sites More sharing options...
Guest Taptap1 Posted May 27, 2011 Report Share Posted May 27, 2011 Thanks a lot. Link to comment Share on other sites More sharing options...
Guest Taptap1 Posted May 27, 2011 Report Share Posted May 27, 2011 Do I have to unzip the TPT ? Link to comment Share on other sites More sharing options...
Guest PeaNut_HU Posted May 27, 2011 Report Share Posted May 27, 2011 (edited) Do I have to unzip the TPT ? Comeon... its the second sentence in the instruction link posted above... "Unzip this Gen2 TPT zip file to your sd card, it should create an image directory." Every info is there, just read it through carefully. Edited May 27, 2011 by PeaNut_HU Link to comment Share on other sites More sharing options...
Guest statts321 Posted May 27, 2011 Report Share Posted May 27, 2011 did you installing the blade wifi fix? I didnt think the blade wifi fix worked with cm7 i,ll give it a try see what happens thanks. Link to comment Share on other sites More sharing options...
Guest stephen m Posted May 27, 2011 Report Share Posted May 27, 2011 The TPT method has no risk of IMEI corruption, it's easy so just do it! :P Just moved my Gen1 phone to Gen2 - I agree it is easy :rolleyes: Link to comment Share on other sites More sharing options...
Guest simonckenyon Posted May 27, 2011 Report Share Posted May 27, 2011 (edited) Actually that's how I do it most of the time. You need root access to mount /system in write mode, though. or a much quicker and easier way is to update the zip before installing Edited May 27, 2011 by simonckenyon Link to comment Share on other sites More sharing options...
Guest k0zmic Posted May 27, 2011 Report Share Posted May 27, 2011 (edited) Sorted. Edited May 27, 2011 by k0zmic Link to comment Share on other sites More sharing options...
Guest dmxpowa Posted May 27, 2011 Report Share Posted May 27, 2011 the actual problem with the wifi is that it keeps disconnecting everytime you try to make a connection or transfer sum bytes. so basicly its working til you try to up or download anything. N74 worked fine, but my wifi keeps getting dced since then. its really annoying. Link to comment Share on other sites More sharing options...
Guest MidaMilunk Posted May 27, 2011 Report Share Posted May 27, 2011 N84 today rebooted while trying to find position with GPS... I am really looking fwd for some solution, all other issues are much smaller ones! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now