Clockworkmod and Original ROM

[Guest Michy7]

Hello,

Im a ZTE Blade owner having the Original Wind Greece ROM on my device.

1. If i install clockworkmod and use it to make a backup of my ROM, will i be able in the future to use this backup to factory reset using TPT and have the clockworkmod removed?

or

2. If i download and TPT the original Wind (Greece) ROM from this link http://android.modaco.com/content/zte-blad...ade-stock-roms/ will this remove clockworkmod?

Thank you

[Guest Phoenix Silver]

Hello,

Im a ZTE Blade owner having the Original Wind Greece ROM on my device.

1. If i install clockworkmod and use it to make a backup of my ROM, will i be able in the future to use this backup to factory reset using TPT and have the clockworkmod removed?

or

2. If i download and TPT the original Wind (Greece) ROM from this link http://android.modaco.com/content/zte-blad...ade-stock-roms/ will this remove clockworkmod?

Thank you

1 no not as it is

2 yes

there is a way to keep clockwork with tpt but you are not here yet :D

[Guest Michy7]

Thank you for your reply,

So the ROM WIND_P729BV1.0.0B05-NO_RECOVERY-update_signed.zip listed here is already packed for TPT and i will have to do the following? (copied from This post)

Applying a TPT

1. Mount your phone on USB or put the SDCard into a USB card reader.

2. Create a directory called image (lowercase) on the root of the SDcard (not in any other directories on the sdcard)

3. Extract the contents of the ZIP file to the image directory on your SD card

(For example: If the drive letter of the SD card is "S:" then extract the content of the ZIP to S:\image)

4. Unmount the SDCard and turn the phone off, remove the battery, put the battery back in.

5. Switch on your phone by holding Menu + volume up + power (hold all three together)

6. Installation will automatically update your firmware, after it the phone restarts (When the updating process starts, you can release the keys) you may or may not see green text here - some users dont

7. After booting - remove or rename the image directory on your SDCard or you can accidently re-flash your phone

Sorry for noobish questions, just wanna make sure i will be able to return to the factory state in case i ever need official service from my phone provider.

Edited March 29, 2011 by Michy7

[Guest Phoenix Silver]

Thank you for your reply,

So the ROM WIND_P729BV1.0.0B05-NO_RECOVERY-update_signed.zip listed here is already packed for TPT and i will have to do the following? (copied from This post)

Sorry for noobish questions, just wanna make sure i will be able to return to the factory state in case i ever need official service from my phone provider.

exactly what you have to do

well written

very clear

yes you'll retrieve the original stock rom state

[Guest Michy7]

Ok, Thank you. I was confused reading another guide saying that WIND stock ROM can only be installed using CWM. It was for P729BV1.0.0B02 (which is my current).

I guess P729BV1.0.0B05 will also work for my phone (I have the TFT screen version).

Edited March 29, 2011 by Michy7