Jump to content

ZTE Blade locked pattern


Recommended Posts

Guest zafisinl1976
Posted

Hi!

I have a zte blade and i forgot the draw pattern code.I search the forums about solution but i am very confused.I am new to android.Is there a way to master reset the phone to factory settings?Any help would be appreciated.Thanks!

Posted

If you fail it enough times, you should be asked to input your google account username/password. Then you can get back in :D

Guest hugobosslives
Posted (edited)
If you fail it enough times, you should be asked to input your google account username/password. Then you can get back in :D

indeed. if you have set up the phone with a active google account and fail at the code 5 times when the 'wait 30 seconds thing' comes up, next to 'emergency call' another button appears which says 'forgotten passcode' or sumthing. click there and log into your google account and all will be fine.

if you havn't set up a google account..... unlucky

but don't despair all is not lost.....

if you have flashed clockwork, just do a factory reset from there as below:

1) boot into clockwork (manually by holding power and volume down when off)

2) use volume keys to navigate and home to select (back to 'go back')

3) hit factory reset option....

4) hit reboot

if you havn't installed clockwork.... little harder

1) install clockwork by fastboot method. (cba to explain fastboot here so if you dont know what it is search the forum) but basically hold power + volume up then plug into a computor (with fastboot files), open a command prompt and then flash the clockwork file you downloaded from here.

2) reboot into clockwork and perform the above steps.

also flashing any rom (by any method, wether tpt, clockwork or other....) will work

basically DONT DO IT AGAIN if you don't want to set up a google account

Edited by hugobosslives
Guest Phoenix Silver
Posted

there is already a big thread on this subject

Guest Komancz
Posted

There is other way that don't involve clockwork at all (android bug that worked on friends phone). You have to google it or proof us that you are owner of the phone and I'll tell ya.

Guest zafisinl1976
Posted
There is other way that don't involve clockwork at all (android bug that worked on friends phone). You have to google it or proof us that you are owner of the phone and I'll tell ya.

Hi!

Thanks to all for quick reply!Unfortunately i can't seem to get the phone recognized by windows.In windows 7 64 bit which i have it finds it automatically but i think they are not the drivers i want to boot the phone with fastboot.So i tried xp 32bit and found new hardware wizard starts then follow the procedure manually(have disk option) but it says the specified location does not contain information about your hardware something like that.I use android usb.inf file which is the only option.I downloaded many usb drivers but none seem to work.Any suggestions?

P.S. I am looking for the receipt of the phone to prove that it is mine and i will upload it to confirm it.Thanks!

Guest zafisinl1976
Posted

Hi!

When i hold power + volume up the green little thing stays for a while and then boots into android and the draw pattern comes up.Do i have to put in the phone a sim card or a microsd card.I test many drivers taken from here http://android.modaco.com/content/zte-blad...a-win7-x86-x64/ but can't get fast boot to work.I am stuck waiting for a device.I also tried with the volume down and power up it gives me on the display ftm and the computer finds smt more like zte usb smothing like that...what is ftm?

Guest hugobosslives
Posted
Hi!

When i hold power + volume up the green little thing stays for a while and then boots into android and the draw pattern comes up.Do i have to put in the phone a sim card or a microsd card.I test many drivers taken from here http://android.modaco.com/content/zte-blad...a-win7-x86-x64/ but can't get fast boot to work.I am stuck waiting for a device.I also tried with the volume down and power up it gives me on the display ftm and the computer finds smt more like zte usb smothing like that...what is ftm?

there are 5 drivers to install when using the phone normally plugged into the computor

and one more that installs when booted (holding power and volume up) when connected to your computor. this one is needed for fastboot (i think)

keep holding power and volume up for a long time to make sure it doesn't boot normally

Guest zafisinl1976
Posted

Hi!

I read somewhere that new blades from middle february doesn't support volume + and power up so i believe that is my problem to getting it to work.Is there another way or a new key combination to achieve this?I press the buttons for a long time but it keeps gettting me into normal boot screen.

Guest hugobosslives
Posted

I think this is only the case for Gen 2 blades tho I will have a look. is yours a Gen 2?

if you don't know..... was it stock 2.2 (froyo) the froyo ones are Gen 2....

Guest jeddy1
Posted
I think this is only the case for Gen 2 blades tho I will have a look. is yours a Gen 2?

if you don't know..... was it stock 2.2 (froyo) the froyo ones are Gen 2....

no his is GEN1 from greece (wind) so 2.1 .

na sou pw re file ,pata volume down kai power gia na mpeis sto recovery an to zte exei diko tou recovery.an oxi tha sou pw meta alla.

Guest zafisinl1976
Posted

With volume down and power it shows me on the screen FTM.What do i do afterwards to get to install clockwork?

The phone is Wind carrier.

Gia pes mas re filaraki ti kanoume apo dw ki epeita gia na egkatastisoume to clockwork?Ksexasa to draw pattern code kai thelw na to kanw epanafora...

Guest hugobosslives
Posted
With volume down and power it shows me on the screen FTM.What do i do afterwards to get to install clockwork?

The phone is Wind carrier.

Gia pes mas re filaraki ti kanoume apo dw ki epeita gia na egkatastisoume to clockwork?Ksexasa to draw pattern code kai thelw na to kanw epanafora...

FTM means you do not have a clockwork image installed. you need to install it (either with fastboot, or with apps like rom manager or recovery manager) basically, SEARCH THE FORUM for how to install clockwork, cos i have explained it way too many times.....

Guest jeddy1
Posted (edited)
With volume down and power it shows me on the screen FTM.What do i do afterwards to get to install clockwork?

The phone is Wind carrier.

Gia pes mas re filaraki ti kanoume apo dw ki epeita gia na egkatastisoume to clockwork?Ksexasa to draw pattern code kai thelw na to kanw epanafora...

loipon edw katse na sou pw kai pou tha pas ok.

Edit: ksereis apo fastboot na to kaneis opos sou leei o parapanw i tha to kaneis me ton tropo pou sou eipa ? min anisixis den einai dyskolo. alla plaka plaka gia enan prwtarh me android einai poio dyskolo oti sou leei aytos panw.an mperdeyteis kapou me oti lew katw pes mou

Edited by jeddy1
Guest jeddy1
Posted
loipon edw katse na sou pw kai pou tha pas ok.

ok koita edw ,tha pareis auto to zip pou tha sou dwsw kai tha kaneis extract ta arxeia kai rixta stin sd karta tou kinitou sou kai meta ksanavale tin karta me ta arxeia sto kinito.ola ta arxeia pou tha kaneis extract tha ta valeis ola se ena fakelo onomazomeno image.

meta tha anapseis to kinito sou me Menu + volume up + power kai asto na teleiwsei tin ergasia kai tha exeis to Hungarian update pou dinei sto kinito 512mb ram.opote me kane oti thes.install clockworkmod kai oti goustareis

APLWS NA KSEREIS OTI THA SOU DIAGRAPSEI OTI EXEIS STO KINITO .mnm.apns,kliseis kai paixnidia kai apps .

edw einai http://www.wuala.com/peanut_hu/OSF_Blade/R..._memory_fix_ROM

alla koita kai edw prwta giati edw einai kanonika oles i odigies! http://android.modaco.com/content/zte-blad...-to-512mb-gen1/

Guest zafisinl1976
Posted

Kalispera file m!

To ekana kai tora exw hungarian menu...ola kala to draw pattern ksekleidwse...tora mporw na perasw elliniko menu kai pws?Signomi file pou se prizw alla opws eipa eimai newbie sta android...

Guest jeddy1
Posted
Kalispera file m!

To ekana kai tora exw hungarian menu...ola kala to draw pattern ksekleidwse...tora mporw na perasw elliniko menu kai pws?Signomi file pou se prizw alla opws eipa eimai newbie sta android...

min anisixeis gia to priksimo :D kai oso gia to newbie OLOI HTAN NEWBIES KAPOTE.loipon an thes tha katevaseis apo to market to more locale 2 h engatesthse to clockworkmod recovery kai egatesthse ena custom rom.tha sou proteinw to flb-rom r11 h to swedish spring kapos etsei einai .an den thes tote egatestise to aplo elliniko rom to opoio eixe to kinito .

Guest zafisinl1976
Posted

Kalimera file mou!

Loipon egkatestisa to clockworkmod recovery 3.0.1.4 blade.Evala ta arxeia apps installer 0.2.1,recovery-clockwork-3.0.1.4-blade,RecoveryManager_v0.32b,UniversalAndroot stin microsd kai ta ekana egkatastasi.Ola ok exw to clockwork egkatestimeno kai bootarw sto menu tou.Tora,pws mporw na egkatastisw to aplo rom to opoio eixe to kinito?

Guest zafisinl1976
Posted

OK file mou...telika to ekana afinontas to hungarian rom kai egkathistontas to locale 2 kai to greek keyboard ime...ola kala kai s euxaristw poli!!!

Thanks to all for the help...i finally did it!!!

Guest jeddy1
Posted (edited)
OK file mou...telika to ekana afinontas to hungarian rom kai egkathistontas to locale 2 kai to greek keyboard ime...ola kala kai s euxaristw poli!!!

Thanks to all for the help...i finally did it!!!

ok wraia ,sorry alla den mporousa na apantisw giati taksideva dyo meres.an thes katevase to FLB-ROM r11 (2.2) meso clockwork .einai grigoro.alla an den variese.tespa asto gia allh fora .diavaze prwta;)

EDIT: parakalw:) ,opote xreiazesai kati edw eimaste.

Edited by jeddy1

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.