Official 2.2 upgrade for Swedish Comviq and TeliaSonera phones

[Guest fonix232]

Wait a minute. This is not a limitation of the hardware itself? Because in all specs the device is listed only dualband 900/1200 MHz in UMTS mode.

It wasn't enabled in the radio firmware I guess.

[Guest hecatae]

Wait a minute. This is not a limitation of the hardware itself? Because in all specs the device is listed only dualband 900/1200 MHz in UMTS mode.

this is what the upgrade updates the blade to http://www.gsmarena.com/zte_libra-3790.php

http://wwwen.zte.com.cn/en/products/mobile...me=ZTE-U%20V880

also on the official zte website

[Guest mELIANTE]

Dammit, you're the 100th who asks this...

HSUPA, official Froyo, no CM. Those are the benefits for now.

Also themes work with SS!

I wouldn't say that is a benefit :D

[Guest bhf]

Well, that would be interesting. Anyone knows, if the GSM frequency 850 MHz was also enabled? So this device could be universally used in the Americas?

[Guest hecatae]

Well, that would be interesting. Anyone knows, if the GSM frequency 850 MHz was also enabled? So this device could be universally used in the Americas?

850 at 2G GSM was also enabled, it's on the specifications on the zte website,

of course if you want proof, we could ask Sebastian404 to upgrade one of his to Gen2

Edited April 2, 2011 by hecatae

[Guest fonix232]

this is what the upgrade updates the blade to http://www.gsmarena.com/zte_libra-3790.php

http://wwwen.zte.com.cn/en/products/mobile...me=ZTE-U%20V880

also on the official zte website

The ZTE X880 and the ZTE-U V880 aren't the same, they are different. The V880 is the Chinese version of the Blade with 256MB of RAM, while the X880 is the Libra, what IS NOT the Blade. Yep, similar phones, but Blade =/= Libra!

[Guest bhf]

850 at 2G GSM was also enabled, it's on the specifications on the zte website,

of course if you want proof, we could ask Sebastian404 to upgrade one of his to Gen2

I take your word for it.

Is ist technically possible to - let's say - port this new, improved RIL into other Custom ROMs, especially CyanogenMod 7?

[Guest kallt_kaffe]

CM7 N33 up and running on my Gen2! :D

Just replace the two libs and boot.img with the attached ones in the install-zip before installing.

Keep in mind that this is the Swedish Spring RLS4 kernel compiled for VMSPLIT_3G and it does not have exactly the same setup as Toms CM7 kernel so there may be some quirks... But it's a start!

cm7_n33_gen2_files.zip

[Guest hecatae]

I take your word for it.

Is ist technically possible to - let's say - port this new, improved RIL into other Custom ROMs, especially CyanogenMod 7?

only with a compatible kernel, as it the 2.2 Libra X880 V880 003Z platform has a different base address to the Blade

and kallt_kaffe has already posted above a test boot.img with the modified kernel and libs required

Edited April 2, 2011 by hecatae

[Guest whatcolour]

CM7 N33 up and running on my Gen2! :D

Just replace the two libs and boot.img with the attached ones in the install-zip before installing.

Keep in mind that this is the Swedish Spring RLS4 kernel compiled for VMSPLIT_3G and it does not have exactly the same setup as Toms CM7 kernel so there may be some quirks... But it's a start!

m8, you rock!!!!!

[Guest kallt_kaffe]

m8, you rock!!!!!

So far the built in overclocking cannot see the supported speeds and USB mounting doesn't seem to work. Propably caused by the fact that my kernel is not identical to the CM7 one.

But as I said, it's a start.

[Guest whatcolour]

So far the built in overclocking cannot see the supported speeds and USB mounting doesn't seem to work. Propably caused by the fact that my kernel is not identical to the CM7 one.

But as I said, it's a start.

still awesome!

tested and all working well (apart from the above).

kk, it would be great to have a 148m partition option, as \cache under CM7 is wasted and 128m is not enough to include all gapps into the system partition.

thanks again!

[Guest hecatae]

Mirrored the Blade Froyo upgrade for COMVIQ customers: (26 mirrors!!! :D)

http://www.easy-share.com/1914483335/Sales...en_V1.00.01.zip

http://www.filesonic.com/file/454919364/Sa...en_V1.00.01.zip

http://depositfiles.com/files/iepufy4m0

http://www.megaupload.com/?d=803QF469

http://www.fileserve.com/file/MAEpGav

http://www.duckload.com/download/4210234/S...en_V1.00.01.zip

http://www.turbobit.net/l6yewdg4b1jr.html

http://www.MegaShare.com/3152930

http://rapidshare.com/files/455445447/Sale...en_V1.00.01.zip

http://www.zshare.net/download/885074587f987ff9/

http://www.filefactory.com/file/ca70b43/n/...en_V1_00_01_zip

http://hotfile.com/dl/112947659/64d0ffb/Sa....00.01.zip.html

http://x7.to/6yetwm

http://www.ziddu.com/download/14427803/Sal...0.01_0.zip.html

http://www.enterupload.com/sjb9qkslqc4v/_S...0.01_0.zip.html

http://oron.com/0w0ayaqiqkxy/Sales_DL_P729...0.01_0.zip.html

http://www.sendspace.com/file/ii4u9j

http://www.badongo.com/file/25267509

http://www.load.to/r32ttuhuhb/Sales_DL_P72..._V1.00.01_0.zip

http://www.mediafire.com/?u2maw3c2fqna9zz

http://www.gamefront.com/files/20179471/Sa..._V1.00.01_0.zip

http://uploadbox.com/files/0d4b4010f8

http://ifile.it/qrp0ujv/Sales_DL_P729V_Sweden_V1.00.01_0.zip

http://www.2shared.com/file/d0Ht0MYS/Sales...den_V10001.html

http://www.speedyshare.com/files/27725226/...en_V1.00.01.zip

http://uploading.com/files/847a9a29/Sales_...n_V1.00.01.zip/

You know, just in case the file might magically dissapear from the internet - I made sure it wont B)

thankyou, couple of people on swedroid have stated it's no longer available from the zte site

[Guest]

K.K you really are the man

now all blades can be up to date

does the blade even have any limits ?

maybe they should of called it ZTE INVINCIBLE !

[Guest hudasp]

CM7 N33 up and running on my Gen2! :D

Just replace the two libs and boot.img with the attached ones in the install-zip before installing.

Keep in mind that this is the Swedish Spring RLS4 kernel compiled for VMSPLIT_3G and it does not have exactly the same setup as Toms CM7 kernel so there may be some quirks... But it's a start!

Working this with CM7 RC4?

[Guest Frankish]

Just read this full thread and i'm in awe at the pace of this.

So in summary we now have,

Gen1 > Gen 2 ability,

Gen2 > Gen 1 ability,

Mostly working cm7 for Gen2,

Obviously already SS another Gen2 rom :D

[Guest jmm82]

Works great with finnish saunalahti blade (+SS RLS4b). Only problem is this, it shows that is roaming and old saunalahti_ril fix wont work. If you use that fix it wont connect any network. If somebody can fix that i´m reeeaally happy!

[Guest fonix232]

Works great with finnish saunalahti blade (+SS RLS4b). Only problem is this, it shows that is roaming and old saunalahti_ril fix wont work. If you use that fix it wont connect any network. If somebody can fix that i´m reeeaally happy!

Well yes the old fix won't work, as the new radio needs new ril libraries.

[Guest kallt_kaffe]

Works great with finnish saunalahti blade (+SS RLS4b). Only problem is this, it shows that is roaming and old saunalahti_ril fix wont work. If you use that fix it wont connect any network. If somebody can fix that i´m reeeaally happy!

Saunalahti sells phones with 2.2 now. You need to get /system/lib/libril-qc-1.so and perhaps also (but propably not) libcm.so from one of these phones.

[Guest Maringer]

Is Seb around at all? I believe that he lives across the pond so may be interested in the ability to unlock the new frequency on an older Blade.

If the (early) reports of better reception are true, I'll have to look into this myself!

Quite incredible to watch the speed of the progress being made with this stuff.

[Guest kallt_kaffe]

So far the built in overclocking cannot see the supported speeds and USB mounting doesn't seem to work. Propably caused by the fact that my kernel is not identical to the CM7 one.

But as I said, it's a start.

Here's an updated package. USB mounting works now. Overclocking works with No-frills CPU Control (and most likely also with SetCPU).

Working great here.

EDIT: I'm now quite certian that USB mounting worked in the first version aswell. It seems USB mounting doesn't work if the phone boots with USB connected but a disconnect/reconnect makes it work again.

cm7_n33_gen2_files.zip

Edited April 2, 2011 by kallt_kaffe

[Guest oh!dougal]

Just read this full thread and i'm in awe at the pace of this.

Its incredible! :D

Well done - but what are you planning for the rest of the week-end? :D

B) ;) :D

[Guest Jekle]

Ok, dropped together a little flashing package for beginners, thanks goes to mrradmir for his modified download.exe!

This one will make you able to flash Gen2 easily (Gen1 armprg.bin is NOT included! DO NOT flash Gen1 TPT with this!).

Usage:

- Extract Flasher.zip

- Copy your TPT into ./files (all mbn and img files)

- Run download.exe and follow the instructions shown there

Will this work with the TeliaSonera files?

[Guest jmm82]

I doubt that HSUPA is enabled i dont get any more upload speed than 0.35mbps.

[Guest Monttu]

I doubt that HSUPA is enabled i dont get any more upload speed than 0.35mbps.

+1