Big problem ! (gen1 to gen2) Solved

[Guest jijijoujou1]

hi everyone , i have i big problems , after upgarding to GEN 2 i installed CM7 and the phone was stucking on the android green logo so mistankenly i formated the recovery , and now i don't have neither clockwork nor A rom installed , so i tried to install the clockwork by fastboot method and i couldn't , by trying adb shell method its say that "device not found " please help me i can't use my phone anymoreeeeee !!!!!!!!!!

Edit: i could install the clockwork recovery , but when trying to install cm7+ gen2 converter then restart it's get in the clockwork menu each time ? any ideas please.

Edit 2: the problem is solved by using this tutorial http://android.modaco.com/content/zte-blad...flash-solution/

and with this channel.nvm file http://zalil.ru/upload/30860309

Big Thank's to mrradmir and CaptainSpectacul...

Edited April 14, 2011 by jijijoujou1

[Guest Swimmerboy]

hi everyone , i have i big problems , after upgarding to GEN 2 i installed CM7 and the phone was stucking on the android green logo so mistankenly i formated the recovery , and now i don't have neither clockwork nor A rom installed , so i tried to install the clockwork by fastboot method and i couldn't , by trying adb shell method its say that "device not found " please help me i can't use my phone anymoreeeeee !!!!!!!!!!

What you should have done was apply the 'patch' that allows CM7 to run on Gen2 devices like it described in the post. Why you'd format the recovery partition is a mystery to me.

Make sure you have the drivers installed to let you use fastboot (do a search of the forum) as I think getting fastboot to work is your only hope for now.

[Guest solidchips]

Not sure wether fastboot works on GEN2 or not.

[Guest solidchips]

If you couldn't get fastboot then you should probably go for TPT.

[Guest Swimmerboy]

If you couldn't get fastboot then you should probably go for TPT.

That definetely doesn't work on Gen2 (yet)

[Guest Swimmerboy]

Not sure wether fastboot works on GEN2 or not.

Just tried on mine - can't get it into fastboot with power and vol [+] or even power, vol [+] and menu held.

If you can't get it into fastboot then you may be left with a rather nice paperweight until we get a TPT from a Gen2 device.

[Guest mrradmir]

Power on phone with vol- pressed and try to flash via flasher again.

[Guest jijijoujou1]

FTM mode is not working , i thought that the only way is adb shell but it"s not recognizing my phone !!!!!!! no hopes i am dead

[Guest Swimmerboy]

Power on phone with vol- pressed and try to flash via flasher again.

Won't work. I think you're up the creek on this one unfortunately. The only ways to get a new ROM or Recovery onto the phone are:

1. TPT (currently unavailable for gen2)
   
2. Via the phone terminal (which you can't get to)
   
3. Via CLockwork (which you can't get to)
   
4. Via ADB (which needs clockwork or phone functionality)
   
5. Fastboot (Which on gen2 requires a command be issued from ROM or ADB)
   

Can't see a way of getting this one fixed without sending it back to manufacturer for repair. There may be a TPT image in the future but it's not going to be soon I'd imagine.

[Guest jijijoujou1]

thank you for your reply , i will try to send it back to manufactur even if i know that the warranty is broken now

[Guest Swimmerboy]

thank you for your reply , i will try to send it back to manufactur even if i know that the warranty is broken now

I'd check the price first - you may be better off buying a new one and selling this one on ebay for parts

[Guest The Soup Thief]

thank you for your reply , i will try to send it back to manufactur even if i know that the warranty is broken now

Hi jijijoujou1 - check kallt_kaffe's response to your other post

Fraid it doesn't look like a great outlook, but he suggests a piece of software that was posted on here a little while back

I forget the name of the fella who first posted about it, but I think he had some correspondence with hecatae - you might try pm'ing him

[Guest jijijoujou1]

Thank's all i have been able to install clockwork and i tried to install JJ and others rom and its getting in clockwork menu each time i reboot ,what can i do now ?

[Guest hedgepigdaniel]

Thank's all i have been able to install clockwork and i tried to install JJ and others rom and its getting in clockwork menu each time i reboot ,what can i do now ?

Go and read all the Gen2 threads before just installing anything. You cannot run Gen1 ROMs on a Gen2 phone. Without modification they are totally incompatible. There is a thread by kalt kaffe with a patch to modify CM7 to work on Gen2, and on the weekend CM7 Nightlies will support Gen2. Swedish Spring also supports Gen2.

[Guest ken218]

Thank's all i have been able to install clockwork and i tried to install JJ and others rom and its getting in clockwork menu each time i reboot ,what can i do now ?

If you want to install CM7, you can install it through clockworks and install patch straight-after, to make the ROM compatible. then you can restart the phone

[Guest jijijoujou1]

If you want to install CM7, you can install it through clockworks and install patch straight-after, to make the ROM compatible. then you can restart the phone

i just did it and when i restard i get the clockwork menu again and again

[Guest hedgepigdaniel]

i just did it and when i restard i get the clockwork menu again and again

maybe the gen2 conversions didn't set up your partitions properly. Have you tried doing it again? If you can get back into FTM mode then you can do a conversion to Gen2 again which should get everything working. If not, then I have the program that I think the soup theif was referring to, and you can use it without FTM mode, but I'd exhaust all other possibilities first because I don't know what it will do to your IMEI. did you keep channel1.nvm when you upgraded?

[Guest hedgepigdaniel]

Also, how did you get clockwork working?

[Guest jijijoujou1]

Also, how did you get clockwork working?

i removed the battery then pressed vol + and - , i got black screen then i downloaded the gen1 flasher and i installed it, and now i am stuck on clockwork menu

[Guest hedgepigdaniel]

i removed the battery then pressed vol + and - , i got black screen then i downloaded the gen1 flasher and i installed it, and now i am stuck on clockwork menu

I assumed you used the flasher to flash Gen1 TPT files with clockwork on them?

In that case, mount the SD card to a computer in clockwork and put the restorestockrecovery.zip from the Gen2 Upgrade file. Flash that in clockwork and see if you can get into FTM Mode. once in FTM Mode, do Gen2 upgrade again.

[Guest jijijoujou1]

I assumed you used the flasher to flash Gen1 TPT files with clockwork on them?

In that case, mount the SD card to a computer in clockwork and put the restorestockrecovery.zip from the Gen2 Upgrade file. Flash that in clockwork and see if you can get into FTM Mode. once in FTM Mode, do Gen2 upgrade again.

i did it , now i am stucking on FTM mode after flashing swdish rom !!!!!

[Guest hedgepigdaniel]

hi everyone , i have i big problems , after upgarding to GEN 2 i installed CM7 and the phone was stucking on the android green logo so mistankenly i formated the recovery , and now i don't have neither clockwork nor A rom installed , so i tried to install the clockwork by fastboot method and i couldn't , by trying adb shell method its say that "device not found " please help me i can't use my phone anymoreeeeee !!!!!!!!!!

Edit: i could install the clockwork recovery , but when trying to install cm7+ gen2 converter then restart it's get in the clockwork menu each time ? any ideas please.

Edit 2: the problem is solved by using this tutorial http://android.modaco.com/content/zte-blad...flash-solution/

and with this channel.nvm file http://zalil.ru/upload/30860309

Big Thank's to mrradmir and CaptainSpectacul...

Hold on - you mean you restored someone elses channel1.nvm? Hasn't your IMEI changed now?

[Guest hecatae]

Hold on - you mean you restored someone elses channel1.nvm? Hasn't your IMEI changed now?

a couple of devs been comparing channel1.nvm files to see where the imei is so a repair method can be implemented.