Help lost Clockwork, CM7 gen2 {Solved}

[Guest lordofangels]

Running CM7 Jacob's Makeshift nightly for Gen2, with Jacobs Gen2 version of CW.

All running fine till this morning,

Rom Manager Updated from the Market,

noticed a new version of clockwork so let if flash.

Thats the problem it flashed a non Gen2 version of Clockwork.

So I can't reboot into clockwork to reflash a Stock Rom, or different Recovery version.

Also no power and volume up, just Boots up Cyanogen

Seb's Recovery Manager does also not work.

Stumped better than a quadruple amputee.

Anyone any idea as too help with my problem?

Cheers LoA

Edited April 19, 2011 by lordofangels

[Guest Schwinni]

Anyone any idea as too help with my problem?

Flash a Gen2 CW with RomManager? :)

[Guest lordofangels]

Flash a Gen2 CW with RomManager? :)

Any idea how too do this?

[Guest Schwinni]

Ahh, sorry, RomManager can't do this.

Install RecoveryManager like described here.

[Guest Matthew Ferguson]

Any idea how too do this?

Just don't do it.

Use the ZTE Recovery app found here: http://android.podtwo.com/recoverymanager/...ager_v0.36b.zip

and the clockwork image found here: http://android.podtwo.com/recovery/recover....4-blade-g2.img

and the rest should be simple. If not, just follow the guide here: http://android.modaco.com/content/zte-blad...or-gen2-device/

Use the section titled How to Install Clockwork using Recovery Manager and start at the step called Unzip ZTE-Blade Recovery Manager from the ZIP you downloaded

After doing all this, you should have clockwork back on your phone :) I recommend uninstalling ROM Manager using Titanium Backup, as it's currently only compatible with Gen1.

IGNORE SCHWINNI'S LINK ABOVE AS THAT IS FOR GEN1 DEVICES.

Edited April 19, 2011 by Matthew Ferguson

[Guest lordofangels]

Ahh, sorry, RomManager can't do this.

Install RecoveryManager like described here.

No can do, Recovery Manager is not compatible with cyanogen7 Gen2,

tried and it just an error message.

@Matthew, thats the version I have already tried..

Edited April 19, 2011 by lordofangels

[Guest pellonet]

Running CM7 Jacob's Makeshift nightly for Gen2, with Jacobs Gen2 version of CW.

All running fine till this morning,

Rom Manager Updated from the Market,

noticed a new version of clockwork so let if flash.

Thats the problem it flashed a non Gen2 version of Clockwork.

So I can't reboot into clockwork to reflash a Stock Rom, or different Recovery version.

Also no power and volume up, just Boots up Cyanogen

Seb's Recovery Manager does also not work.

Stumped better than a quadruple amputee.

Anyone any idea as too help with my problem?

Cheers LoA

There is a very easy way to recover CW, I did the same thing earlier, just go HERE

Poviding CM7is booting up OK

Look at the method in post #5

If you are using 'Android Commander' the shell console there works OK too.

Edited April 19, 2011 by pellonet

[Guest Schwinni]

IGNORE SCHWINNI'S LINK ABOVE AS THAT IS FOR GEN1 DEVICES.

Very true. Sorry for that!

No can do, Recovery Manager is not compatible with cyanogen7 Gen2,

tried and it just an error message.

@Matthew, thats the version I have already tried..

Read this thread:

http://android.modaco.com/content/zte-blad...en2-conversion/

[Guest Matthew Ferguson]

There is a very easy way to recover CW, I did the same thing earlier, just go HERE

Poviding CM7is booting up OK

Look at the method in post #5

I don't think using command prompt/terminal is an easy way of doing things...

OP, just follow and use the links I provided. Schwinni's were for Gen1 devices. Mine is a different guide for Gen2. I'm pretty sure Recovery Manager 0.36b supports Gen2.

Edited April 19, 2011 by Matthew Ferguson

[Guest Schwinni]

I'm pretty sure Recovery Manager 0.36b supports Gen2.

Yes, but it will probably FC on CM7.

[Guest lordofangels]

There is a very easy way to recover CW, I did the same thing earlier, just go HERE

Poviding CM7is booting up OK

Look at the method in post #5

If you are using 'Android Commander' the shell console there works OK too.

Thanks pellonet, all done, thanks again... :)

Thanks Matthew and schwinni

Just have to wait for Koush to update for Gen2,

and See if Seb updates Recovery Manager too?

Thanks you three, thought i was buggered there for a while.. :)

Edited April 19, 2011 by lordofangels

[Guest Matthew Ferguson]

Thanks pellonet, all done, thanks again... :)

Thanks Matthew and schwinni

Just have to wait for Koush to update for Gen2,

and See if Seb updates Recovery Manager too?

Thanks you three, thought i was buggered there for a while.. :(

No prob, happy to help :)