Guest Tjoffe Posted May 10, 2011 Report Posted May 10, 2011 Hi. New to this forum but have searched around for info but cant find anything specific so i ask: I was updating my phone to 2.2 with ZTE update from their webpage. At around 13 of 100 it said "FAIL" and now i can't start the phone or get the computer to connect or get the FTM mode.. What shall i do?
Guest Mushroom_Lord Posted May 10, 2011 Report Posted May 10, 2011 Well no-one ever uses Official methods :unsure: Well. 1) Where did you get the blade from (country) (hardware version) 2) Do you know if its gen1 or gen2 3) could you provide a link to the page on the zte site where you got the tool from (not the tool itself)
Guest Tjoffe Posted May 10, 2011 Report Posted May 10, 2011 (edited) Well no-one ever uses Official methods :unsure: Well. 1) Where did you get the blade from (country) (hardware version) 2) Do you know if its gen1 or gen2 3) could you provide a link to the page on the zte site where you got the tool from (not the tool itself) 1) Sweden with 2.1 from Tele2 2) don't know the generation (2 months old) 3) http://ztesweden.se/Exego.aspx?p_id=327 3G HSDPA, 7.2 Mbps; HSUPA, 5.76 Mbps Bluetooth v2.1 with A2DP Digitalkamera 3,15 megapixel, 2048x1536 pixlar, autofokus Displaystorlek 480 x 800 pixlar, 3.5 tum Internminne 150 MB lagring, 512 MB RAM, 512 MB ROM Minneskortsplats microSD, upp till 32GB, 2GB ingår Nät GSM 900 / 1800 / 1900, HSDPA 1900 / 2100 Operativsystem Android OS, v2.1 (Eclair) Some people have installed the "comviq" version and said it worked fine. That was what i was trying to do. Thanks in advance. /tjoffe Edited May 10, 2011 by Tjoffe
Guest Mushroom_Lord Posted May 10, 2011 Report Posted May 10, 2011 Try using the program again. If it doesn't work, look for a gen1 tpt image. (Assuming you have some method of placing the tpt onto the SD card without the phone. Note that the chances are all of your data had been lost (but not the contents of your SD)
Guest Tjoffe Posted May 10, 2011 Report Posted May 10, 2011 Try using the program again. If it doesn't work, look for a gen1 tpt image. (Assuming you have some method of placing the tpt onto the SD card without the phone. Note that the chances are all of your data had been lost (but not the contents of your SD) Thanks for the awsomely fast response! I tried the program again but as i cant get the computer to recognice the phone i have no luck getting in to the FTM menu... I will get a SD card adapter tomrrow and try the gen 1 tpt. Also made a copy of the sd before i started so that might work... The data doesnt matter.. Thanks again!
Guest Mushroom_Lord Posted May 11, 2011 Report Posted May 11, 2011 Thanks for the awsomely fast response! I tried the program again but as i cant get the computer to recognice the phone i have no luck getting in to the FTM menu... I will get a SD card adapter tomrrow and try the gen 1 tpt. Also made a copy of the sd before i started so that might work... The data doesnt matter.. Thanks again! No problem - hope it works for you! Tpt's seem to work wonders (I love them) - they have revived the blade from many situations :unsure: If not then your phone may have some issues that you may want to talk to zte/your carrier about because your phone "died" whilst using their tool.
Guest GX390 Posted May 11, 2011 Report Posted May 11, 2011 Blade Froyo upgrade for Tele2 customer is planned for release beginning of April :unsure:
Guest Tjoffe Posted May 11, 2011 Report Posted May 11, 2011 Hi again. Now it seems i have another problem. When i slip the sd-card in the cardreader it says " need to format" and when i try 2 it says incomplete.. so i cant put anyting on the card.. any ideas for that 2?
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now