Help Me

[Guest AlexG1990]

Hey Everyone

I currently have a ZTE RACER TELSTRA AUSTRALIA Model: T3020

I have previously updated from stock rom to V2.3

last night using Clockworks Recovery Menu (hold Vol - and power) i updated to ECLR_P726CUV1.0.0B10-update_signed.zip

my phone now gets to chineise boot logo and is stuck in loop

will not enter bootloader (vol+ and power)

now will it enter recovery only FTM mode

i have tried using ftm in device manager it comes up with DFU mode

and in boot logo loop it says Composite ABD Interface, it will not allow flashing in either mode

can someone help me out i think i have succsefully bricked my phone..

Thanks all

Edit1:

sorry i have tried using rickywyatt ABD.exe and fastboot and it says on both waiting for device

i also tried a dfu tool v880_conversion_recovery.zip and this finds phone but will not update or change my recovery.img on phone.

Edit2:

Hey guys just letting everyone know that i have got a bit further in fixing my phone,

by using a ZTE-Blade TPT Gen 1 ROM, and download_nochecksGen2.exe I was able to flash all needed files apart from a full system.img, this has now allowed me to put phone into bootloader power+vol up this shows up in device manager as "Android Sooner Single ADB Interface" therefore fastboot and adb.exe now find my device, yet im still having problems i flashed a clockworkmod recovery onto device and when i switch on phone with pow+vol dwn the red led stays on but nothing comes up on screen, i have tested many different versions of recovery.img and have yet to find a working version, Im currently downloading TELSTRA stock rom and i will attempt to use fastboot to flash update.zip, if this fails i will need someone to point me to Zte Racer image folder for flashing. Thanks all

Edited May 15, 2011 by AlexG1990

[Guest pilotdude647]

Hey Everyone

I currently have a ZTE RACER TELSTRA AUSTRALIA Model: T3020

I have previously updated from stock rom to V2.3

last night using Clockworks Recovery Menu (hold Vol - and power) i updated to ECLR_P726CUV1.0.0B10-update_signed.zip

my phone now gets to chineise boot logo and is stuck in loop

will not enter bootloader (vol+ and power)

now will it enter recovery only FTM mode

i have tried using ftm in device manager it comes up with DFU mode

and in boot logo loop it says Composite ABD Interface, it will not allow flashing in either mode

can someone help me out i think i have succsefully bricked my phone..

Thanks all

Edit1:

sorry i have tried using rickywyatt ABD.exe and fastboot and it says on both waiting for device

i also tried a dfu tool v880_conversion_recovery.zip and this finds phone but will not update or change my recovery.img on phone.

Edit2:

Hey guys just letting everyone know that i have got a bit further in fixing my phone,

by using a ZTE-Blade TPT Gen 1 ROM, and download_nochecksGen2.exe I was able to flash all needed files apart from a full system.img, this has now allowed me to put phone into bootloader power+vol up this shows up in device manager as "Android Sooner Single ADB Interface" therefore fastboot and adb.exe now find my device, yet im still having problems i flashed a clockworkmod recovery onto device and when i switch on phone with pow+vol dwn the red led stays on but nothing comes up on screen, i have tested many different versions of recovery.img and have yet to find a working version, Im currently downloading TELSTRA stock rom and i will attempt to use fastboot to flash update.zip, if this fails i will need someone to point me to Zte Racer image folder for flashing. Thanks all

Hi Can you plz post the Telstra stock rom. i tried to update mine too and f**ked it up

[Guest Racerboy]

i think this maybe what your looking for HERE check it first

HERE is list of all stock roms

CAUTION : These recovery files will overwrite all of your personal data, and recovery partition, if you wish to keep your data, make sure to back it up.

after installing stock ROM you will have to root your phone again and re-install the recovery manager to install a recovery like Clockwork Recovery Mod if you wish to install a custom ROM

Edited August 31, 2011 by Racerboy

[Guest Vlatko25]

Hey Everyone

I currently have a ZTE RACER TELSTRA AUSTRALIA Model: T3020

I have previously updated from stock rom to V2.3

last night using Clockworks Recovery Menu (hold Vol - and power) i updated to ECLR_P726CUV1.0.0B10-update_signed.zip

my phone now gets to chineise boot logo and is stuck in loop

will not enter bootloader (vol+ and power)

now will it enter recovery only FTM mode

i have tried using ftm in device manager it comes up with DFU mode

and in boot logo loop it says Composite ABD Interface, it will not allow flashing in either mode

can someone help me out i think i have succsefully bricked my phone..

Thanks all

Edit1:

sorry i have tried using rickywyatt ABD.exe and fastboot and it says on both waiting for device

i also tried a dfu tool v880_conversion_recovery.zip and this finds phone but will not update or change my recovery.img on phone.

Edit2:

Hey guys just letting everyone know that i have got a bit further in fixing my phone,

by using a ZTE-Blade TPT Gen 1 ROM, and download_nochecksGen2.exe I was able to flash all needed files apart from a full system.img, this has now allowed me to put phone into bootloader power+vol up this shows up in device manager as "Android Sooner Single ADB Interface" therefore fastboot and adb.exe now find my device, yet im still having problems i flashed a clockworkmod recovery onto device and when i switch on phone with pow+vol dwn the red led stays on but nothing comes up on screen, i have tested many different versions of recovery.img and have yet to find a working version, Im currently downloading TELSTRA stock rom and i will attempt to use fastboot to flash update.zip, if this fails i will need someone to point me to Zte Racer image folder for flashing. Thanks all

hey i had the same problem

now listen to me how you gonna fix it

go to 4pda

post for MTC 916 2.3.5 rom

there is fastboot.rar to download

thats is for gen 1

the you must

download that

extract to c drive on pc

turn off your phone

volume+ and power button and put usb in pc,click fastboot batch file

it will reboot your bootloader again