Help putting stock back onto UK blade with broken screen

[Guest finbaar]

The LCD screen on my UK Blade has broken so it is being sent off for repair under warranty. It is a TFT model bought on 30/4/2011. I had converted via TPT to gen 2 and was running FLB 11b. When the screen first went I could see about 1/5th and I could make calls and use the touch screen. All I can see now is about 2mm on the extreme left. Luckily I can use my wife's OLED Blade to help me navigate Clockwork Mod.

I have used the TPT method to put it back to gen 1 which then loads to Clockwork Mod. I can choose a stock ROM and flash it but am struggling with finding the right one.

The B20, B10 and B08 seem to load OK but after they have loaded they look very strange. From what I can see there is a lock screen which I can swipe to unlock. There then seems to be a screen which I can scroll up and down. None of the home/menu/back buttons do anything.

Am I using the correct firmware? Can I get my phone back to stock before sending it off or should I put it back to gen2 and hope the do not notice?

Edited June 5, 2011 by finbaar

[Guest Roph]

It could be that other things are damaged too. If you bought it at that date, it's almost certainly a B10 one.

[Guest finbaar]

It could be that other things are damaged too. If you bought it at that date, it's almost certainly a B10 one.

You could be right about the other damage but all was well on gen 2. I will have another go with B10.

[Guest finbaar]

Well I have just tried FLB 10b and that loaded no problem. I will try downloading from Pheonix Silver's site as the B10 I was using was from Seb's.