Guest davidevinavil Posted June 8, 2011 Report Posted June 8, 2011 (edited) Hi two day ago I've problem with download app from market so I tried to downgrade to last gingerbread leak to froyo 1.001.06 using ADT 1.282 by MA.. At the end it give me this error Locking into forum seems others has similar problem with Market.. Anyother has less rom issue? Seems downgrade from gingerbread to froyo could make this issue Edited June 24, 2011 by davidevinavil
Guest davidevinavil Posted June 8, 2011 Report Posted June 8, 2011 This is the result on my phone.. Really phone works but internal memory is only about 40 Mb free :/ And market still don't work
Guest Posted June 8, 2011 Report Posted June 8, 2011 Ouch ! Did you try to flash again a 2.2 BIN with regular ADT ?
Guest davidevinavil Posted June 8, 2011 Report Posted June 8, 2011 (edited) clean boot is ok？ Clean boot works but internal rom is always low.. I tried also to flash froyo 1.001.06.. Then check for OTA update.. Found update 1.100.16, start download.. But also this fail into amss mode :/ When I flash gingerbread leak flash process goes well but market still don't work and also rom still be lower than normal.. About 40 Mb free damn.. I think there was some file picked up from phone to ADT in flash process and something goes wrong, so that corrupted file is always into phone.. Or maybe that a portion of rom that is hardware fail?! If remember well free rom was 40/187 Mb Is right 187 Mb of system partition? Edited June 8, 2011 by davidevinavil
Guest lgcmn Posted June 8, 2011 Report Posted June 8, 2011 (edited) Clean boot works but internal rom is always low.. I tried also to flash froyo 1.001.06.. Then check for OTA update.. Found update 1.100.16, start download.. But also this fail into amss mode :/ When I flash gingerbread leak flash process goes well but market still don't work and also rom still be lower than normal.. About 40 Mb free damn.. I think there was some file picked up from phone to ADT in flash process and something goes wrong, so that corrupted file is always into phone.. Or maybe that a portion of rom that is hardware fail?! If remember well free rom was 40/187 Mb Is right 187 Mb of system partition? did u try to install any leak with setup.exe (not via ADT)? p.s. after flashing 19 bin, i tried to flash any bin from 06 (2.2) to 19 (2.3), the process went well but phone always bootlooped on android logo..the only thing that helped me is installing recovery (1.0 for 2.2 and 2.0 for 2.3) while bootlooping, and making a full wipe.. there is smth wrong with all bins (with setup.exe leaks there were no problems) Edited June 8, 2011 by lgcmn
Guest davidevinavil Posted June 8, 2011 Report Posted June 8, 2011 (edited) did u try to install any leak with setup.exe (not via ADT)? mmm I don't remember I made a lot of try... But I'm sure that I've made wipe also by recovery amonra but the result is the same. Well I'll try this way.. Edited June 8, 2011 by davidevinavil
Guest lgcmn Posted June 8, 2011 Report Posted June 8, 2011 Yes same result.. what leak do u have now?
Guest davidevinavil Posted June 8, 2011 Report Posted June 8, 2011 what leak do u have now? I tried all gingerbread leak wiping with recovery and without recovery flashing with ADT Tried also froyo 1.001.02, 1.001.06, 1.100.16
Guest davidevinavil Posted June 8, 2011 Report Posted June 8, 2011 did u try to install any leak with setup.exe (not via ADT)? p.s. after flashing 19 bin, i tried to flash any bin from 06 (2.2) to 19 (2.3), the process went well but phone always bootlooped on android logo..the only thing that helped me is installing recovery (1.0 for 2.2 and 2.0 for 2.3) while bootlooping, and making a full wipe.. there is smth wrong with all bins (with setup.exe leaks there were no problems) Wich setup.exe do you mean?
Guest lgcmn Posted June 8, 2011 Report Posted June 8, 2011 (edited) I tried all gingerbread leak wiping with recovery and without recovery flashing with ADT Tried also froyo 1.001.02, 1.001.06, 1.100.16 did u try to flash with original adt (02, 06 or 16 bin)? a lot of people has different issues with metal after the 2.3 leaks installed Wich setup.exe do you mean? any leak in setup.exe (not in a bin file) like this for example: http://android.modaco.com/content/acer-liq...-gen2-03-16-01/ Edited June 8, 2011 by lgcmn
Guest davidevinavil Posted June 8, 2011 Report Posted June 8, 2011 did u try to flash with original adt (02, 06 or 16 bin)? a lot of people has different issues with metal after the 2.3 leaks installed Yes I tried also with original acer ADT downloaded from acer website. Now it doesn't work.. When launch it with phone disconnected it say that flash couldn't be done, put phone in amss mode whit key combo and retry.. It think that phone is plug but it isn't. What can I do to reset original ADT? I'm not practic with windows I'm using linux since some years and use windows only to flash phone ;)
Guest dieghito Posted June 8, 2011 Report Posted June 8, 2011 ciao davide hi davidevinavil. today I using gingerhoney 1.2, so I wanted to restore froyo, so I flash Acer_LiquidMetal_1.100.36.AAP.GEN2.bin The phone work very good, and I install recovery 2.0, Athe the reboot of the rom, this rom is stop do white title "acer" since 20 minutes.
Guest Schiwi Posted June 9, 2011 Report Posted June 9, 2011 Did you try a "Factory Reset" ? *2767*3855#
Guest dieghito Posted June 9, 2011 Report Posted June 9, 2011 Fortunatey my phone work even if home keyboard doesn'twork and it is possible lock off screen with power botton,and notification bar doesn't work. I tried factory reset but the phone after 30 minutesis on acer word yet
Guest Nesli Posted June 9, 2011 Report Posted June 9, 2011 Hmm, that´s bad news, anyway when dev has trouble with his phone :/ Hope with finger cross you´ll fix it ;) Today, I also planned downgrade to froyo for today, some step what i have to avoid ? :/
Guest Nesli Posted June 9, 2011 Report Posted June 9, 2011 The phone work very good, and I install recovery 2.0, Athe the reboot of the rom, this rom is stop do white title "acer" since 20 minutes. RECOVERY 2.0 is only for GB leak..Succesfully downgraded fo 2.2 ;)
Guest rain_1394 Posted June 9, 2011 Report Posted June 9, 2011 try change ano ther Data Calbe,poor quality Data Cable will cause strange prrblem
Guest harylauw Posted June 9, 2011 Report Posted June 9, 2011 Yes I tried also with original acer ADT downloaded from acer website. Now it doesn't work.. When launch it with phone disconnected it say that flash couldn't be done, put phone in amss mode whit key combo and retry.. It think that phone is plug but it isn't. What can I do to reset original ADT? I'm not practic with windows I'm using linux since some years and use windows only to flash phone :P try to flash on another computer, try to install recovery then WIPE ALL,wipe dalvik, try to update with ADT 1.282 edited, flash to latest froyo and then gingerbread(i think changing partition is also good way to wipe ;) )
Guest davidevinavil Posted June 9, 2011 Report Posted June 9, 2011 My metal is already on the way to ACER assistance.. Today I've bought a Liquid Mini for 150 euro ;) Waiting to return of Metal :P
Guest davidevinavil Posted June 11, 2011 Report Posted June 11, 2011 Anyway thank to all that tried to help me ;)
Guest deepfabry Posted June 23, 2011 Report Posted June 23, 2011 i had same problem than retry with other flash solve but now have problem with market it dont download any apps why? :)
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now