HELP!! WHY CAN'T I USE CM7???

[Guest VcamX]

San Francisco Orange, version is B10

I tried TPT to upgrade to GEN2

pigfish shows it is GEN2

And I upgraded to CM 7.0.3, in Recovery it showed successful.

I can log in CM once, but it stayed in the Big Android Picture after I rebooted it.

AND I CAN NOT BOOT IT!!!!!!!!!!!!

HOW SHOULD I DO???????

I have upgraded many times, there is always this problem.

One time, I change the CM setting - performance - CPU - resetting CPU when rebooting. Just some setting like that.

And when I rebooted it, it can boot!! But next time I failed again!

Is it the System/Cache/Data size improper??

WHO CAN HELP ME???????

Sorry for my English

[Guest k0zmic]

Do a full wipe again in recovery. Then go into mounts and storage and mount 'USB Storage' and then plug your phone into a computer via USB. Download a newer nightly e.g. N98 or N108 and drag it onto your SD Card. Then flash this newer version.

[Guest Lister Of Smeg]

Hi vCamX,

As per k0mic, instructions... but one other thing to check/make sure (and may not apply, as I am not Gen2) but check if using ClockworkMod, that you have the right Recovery installed, esp if ya gone from Gen1, and now Gen2, you may need a Gen2 recovery, as I have seen these listed...

As I had a similar issue recently which K0mic patiently stayed with me to work out... although I had the correct Gen1 Recovery installed, it was a too newer one than was capable of supporting my Rom, and so I couldnt install and got stuck on the same screen. So goto the Rom page and make sure you have the correct one installed.

Cheers, Lister

Do a full wipe again in recovery. Then go into mounts and storage and mount 'USB Storage' and then plug your phone into a computer via USB. Download a newer nightly e.g. N98 or N108 and drag it onto your SD Card. Then flash this newer version.