Guest rijon99 Posted June 30, 2011 Report Posted June 30, 2011 (edited) Hello everyone, I have a problem with my blade (OLED). Yesterday it went into airplane mode and it is stuck in that mode. and I cannot get out of it. when I try to uncheck it, it just greys out and does not do anything. I was initially using flb r11 but I have upgraded to gen2 and using cyanogenmod green v5, with wbaw's method to see if that solves the problem, but it did not make a difference. I've tried many things such as rebooting, wiping cache and data partition, formatting system, boot and data partition but it has failed to do anything. No matter what I try, I cannot exit airplane mode. I have read that you could try to disable sim lock, but I cannot uncheck it as it keeps telling me the passcode is incorrect but I know it is not. Although it is airplane mode, wifi and bluetooth are not greyed out and I'm still able to use them. I am totally stumped and do not know what to do, any help? Or is my phone completely useless as a phone? Thanks Edited June 30, 2011 by rijon99
Guest rijon99 Posted July 1, 2011 Report Posted July 1, 2011 More details: My phone was working perfectly well before this happened. I've also tried an emergency call, it comes up with a message "turning on radio" and the circle spinner is on an endless loop, I have to restart the phone to remove the message.
Guest Jetba Posted July 1, 2011 Report Posted July 1, 2011 Have you tried to reset with reflash and wipe, or tpt? I had the same problem, so i put mine to warranty.
Guest k0zmic Posted July 1, 2011 Report Posted July 1, 2011 It sounds as if the entire phone radio has just frozen. I think a warranty is the best course of action.
Guest shmizan Posted July 1, 2011 Report Posted July 1, 2011 happened to me earlier today with the Chinese 2.2.2 rom, when I was messing with the radio NV items. another wbaw's TPT should have solved it. if it didn't you will have to use your warranty..
Guest rijon99 Posted July 1, 2011 Report Posted July 1, 2011 (edited) Yes, I've tried reflashing & tpt (when i upgraded to GEN2.) The thing is that I do not want to replace it as I've got an OLED, and it will almost definately be replaced with a TFT. Any other options? Or am I going have to replace it for sure? Edit: I'll try to switch back to gen1 through TPT. Will get back soon with results Edit2: Unfortunately, no luck. Log attachedalogcat.2011_07_02_11_38_37_0100.txt Edited July 2, 2011 by rijon99
Guest Amsome1 Posted July 25, 2011 Report Posted July 25, 2011 Yes, I've tried reflashing & tpt (when i upgraded to GEN2.) The thing is that I do not want to replace it as I've got an OLED, and it will almost definately be replaced with a TFT. Any other options? Or am I going have to replace it for sure? Edit: I'll try to switch back to gen1 through TPT. Will get back soon with results Edit2: Unfortunately, no luck. Log attached I have the exact same problem. After going from gen 1 to gen 2 for cyanogenmod7, my baseband borked and i can't turn off airplane mode. Using the dialer codes to access the phone info menu, i couldn't turn the radio on at all. Is there a fix for this, or will i have to just wait for the skate?
Guest Mitchel1974 Posted November 15, 2011 Report Posted November 15, 2011 I have the exact same problem. After going from gen 1 to gen 2 for cyanogenmod7, my baseband borked and i can't turn off airplane mode. Using the dialer codes to access the phone info menu, i couldn't turn the radio on at all. Is there a fix for this, or will i have to just wait for the skate? It is quite simple .... I've had a similar issue : But you need a working phone to make a backup of your NV rom ( working ZTE blade and 1 stuck blade) first of all download stock recovery.zip , this to allow to put your GEn 2 phone in FTM mode , copy to the root of the sd card. boot into recovery mode (clockwise) install the stock recovery.zip file reboot Now you'll be able to boot in FTM mode (diagnostic mode) download QPST .....and install it on your PC which will be connected to the ZTE blade Connect usb cable to the blade (ZTE phone) Boot in FTM mode (when phone is off , push volume - and powerbutton until FTM appears in screen. Now normally on your pc you'll find in COM ports ZTE diagnosticmode in com X (you need this COM port) (this can be found in system , hardware management console) Start now QPST configuration ADD port , and select the COM port found above in system settings Click Ok , right click on Port , and enable the port to be in diagnostic mode ..... Choose now in QPST configuration start clients ... software download a new window appears.... make a backup of the working phone (make sure it is in FTM mode else backup will not succeed) If this is done , put the Phone (plug usb cable into the phone) in which is stuck in airplane mode ..... and put it in FTM mode restore the backup you've been taking just before..... And in my case all was working again .....
Guest turboduck Posted May 22, 2012 Report Posted May 22, 2012 It is quite simple .... I've had a similar issue : But you need a working phone to make a backup of your NV rom ( working ZTE blade and 1 stuck blade) first of all download stock recovery.zip , this to allow to put your GEn 2 phone in FTM mode , copy to the root of the sd card. boot into recovery mode (clockwise) install the stock recovery.zip file reboot Now you'll be able to boot in FTM mode (diagnostic mode) download QPST .....and install it on your PC which will be connected to the ZTE blade Connect usb cable to the blade (ZTE phone) Boot in FTM mode (when phone is off , push volume - and powerbutton until FTM appears in screen. Now normally on your pc you'll find in COM ports ZTE diagnosticmode in com X (you need this COM port) (this can be found in system , hardware management console) Start now QPST configuration ADD port , and select the COM port found above in system settings Click Ok , right click on Port , and enable the port to be in diagnostic mode ..... Choose now in QPST configuration start clients ... software download a new window appears.... make a backup of the working phone (make sure it is in FTM mode else backup will not succeed) If this is done , put the Phone (plug usb cable into the phone) in which is stuck in airplane mode ..... and put it in FTM mode restore the backup you've been taking just before..... And in my case all was working again ..... You revived my buddy's phone. Thanks. My friend's phone was half-bricked after a bad tpt update. After 3 days of endless fiddling I stumble upon your post and now the phone is back! I am so happy. Thank you!
Guest bek4ever Posted August 9, 2012 Report Posted August 9, 2012 can any one help here i don't have working phone to make backup
Guest Extensis Posted October 11, 2012 Report Posted October 11, 2012 yes how about If you dont have working phone to backup? Is there any link where we can download that backup files nedded?
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now