Guest hecatae Posted June 30, 2011 Report Posted June 30, 2011 (edited) http://support.zte.com.cn/support/news/New...?newsId=1000922 forget that it states v9 series for a second, lets see if it works mirror here http://www.mediafire.com/?m7gdazz86eegrxq found here http://android.modaco.com/content/zte-ligh...le-cm7-kernels/ Edited June 30, 2011 by hecatae
Guest lol looool Posted June 30, 2011 Report Posted June 30, 2011 You made a mistake. This is the ZTE BLADE forum
Guest k0zmic Posted June 30, 2011 Report Posted June 30, 2011 You made a mistake. This is the ZTE BLADE forum I think Hecatae knows that, hence the reason he said this: forget that it states v9 series for a second, lets see if it works
Guest burstlam Posted June 30, 2011 Report Posted June 30, 2011 There are configs for v9 and blade. . . even with skate!!! but I think the source is again fxxx up, I try to build one yet the video drivers compile error force it to quit
Guest jeddy1 Posted June 30, 2011 Report Posted June 30, 2011 You made a mistake. This is the ZTE BLADE forum he knows where he post and second dont tripple post !!!
Guest burstlam Posted July 1, 2011 Report Posted July 1, 2011 (edited) I can confirm that the oled driver in the source is broken. After replacing the broken files (the oled's file) with the older version. it builds. I change the source to make it support current CM. Performance is nearly the same to TOMG's and the heating problem of the back seems to be gone. pls be noted that overclocking is not supported. just flash it with recovery. CM7boot_0624.zip md5 : e766e304e5089f0ac36dde20844ccd56 Edited July 1, 2011 by burstlam
Guest t0mm13b Posted July 1, 2011 Report Posted July 1, 2011 (edited) Another thing noticed, new bluetooth driver and camera sensor drivers, the old one uses MT9T11X, that is dropped from the newer source and replaced with MT9P111. Camera, I'd imagine should feel snappier (pun intended :)) Just looked more - there's no TAOS sensor TSL-2771 (proximity) in there? :\ As Phoenix_Silver (hii darling kiss) reckons, battery life would be better... ? Edited July 1, 2011 by t0mm13b
Guest k0zmic Posted July 1, 2011 Report Posted July 1, 2011 I think without the TAOS Sensor driver the screen will just stay on during a call, other than that it should be working.
Guest t0mm13b Posted July 1, 2011 Report Posted July 1, 2011 Another thing I should add: do not add any patches from other sources into this so not to contaminate it. :)
Guest Phoenix Silver Posted July 1, 2011 Report Posted July 1, 2011 hi darling kiss :) I'll publish current of the day a version with the option to overclock it If you have any suggestion of things to add feel free to ask and i 'll add them in the kernel
Guest bhf Posted July 1, 2011 Report Posted July 1, 2011 Performance is nearly the same to TOMG's and the heating problem of the back seems to be gone. I can't confirm the nearly same performance. I rebooted my phone thrice, but in menues like Settings the phone is laggy as hell.
Guest Posted July 1, 2011 Report Posted July 1, 2011 (edited) Everything seems to be working as is it should. However,everytime I do a reboot,I get cmparts force close. Edited July 1, 2011 by Guest
Guest wbaw Posted July 1, 2011 Report Posted July 1, 2011 (edited) hotfile mirror of original kernel files from zte. http://hotfile.com/dl/122695663/f4dfc12/ke...part01.rar.html http://hotfile.com/dl/122695919/8750b31/ke...part02.rar.html http://hotfile.com/dl/122696062/2c0bc37/ke...part03.rar.html http://hotfile.com/dl/122696231/7bf25a4/ke...part04.rar.html http://hotfile.com/dl/122696365/885eef8/ke...part05.rar.html http://hotfile.com/dl/122696527/a5c6189/ke...part06.rar.html http://hotfile.com/dl/122696734/bd1226c/ke...part07.rar.html http://hotfile.com/dl/122697215/e166307/ke...part08.rar.html http://hotfile.com/dl/122697659/2311d82/ke...part09.rar.html http://hotfile.com/dl/122697930/a0d933b/ke...part10.rar.html http://hotfile.com/dl/122698179/22323b8/ke...part11.rar.html Edited July 1, 2011 by wbaw
Guest LorianNod Posted July 1, 2011 Report Posted July 1, 2011 (edited) Flashed on top of 114 with old audio lib. Obviously subject to confimation from others, but VERY impressive standby battery usage for me. So far today been on standby 7 hours and used 3% battery. (92% to 89%). Normally my battery stats are pretty reliable. GPS works OK too without any patches. Edited July 1, 2011 by LorianNod
Guest Drirr Posted July 2, 2011 Report Posted July 2, 2011 What about the ZTE Libra kernel sources? Something that can be taken from that to benefit the Blade? ZTE LIBRA Series-Froyo kernel(2.6.32) source code: http://support.zte.com.cn/support/news/New...?newsId=1000763
Guest Drirr Posted July 2, 2011 Report Posted July 2, 2011 What about the ZTE Libra kernel sources? Something that can be taken from that to benefit the Blade? ZTE LIBRA Series-Froyo kernel(2.6.32) source code: http://support.zte.com.cn/support/news/New...?newsId=1000763
Guest shmizan Posted July 2, 2011 Report Posted July 2, 2011 (edited) there's an official source released for the blade here Edited July 2, 2011 by shmizan
Guest k0zmic Posted July 2, 2011 Report Posted July 2, 2011 there's an official source released for the blade here Your link is broken.
Guest shmizan Posted July 2, 2011 Report Posted July 2, 2011 (edited) you're right. modaco's forum code is broken in fact. here: http://android.modaco.com/content-page/342...kernel/page/20/ second page Edited July 2, 2011 by shmizan
Guest k0zmic Posted July 2, 2011 Report Posted July 2, 2011 modaco's forum code is broken in fact. Very true.
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now