SOS -- Can nor boot after flashed Acer_LiquidMT_3.026.01_EMEA-GEN1_03.26.02.bin

[Guest vikings123]

I tried to update to Acer_LiquidMT_3.026.01_EMEA-GEN1_03.26.02.bin

I used Acer Download tools to flash the bin file.

Everything seemed to go smoothly the point of "reboot"

The device seemed to enter Recovery mode ,, because I can feel three vibrations before it enters endless vibration loop.

The device kept vibrating ...

I tried to remove battery and put it back -- the same.

Without battery inserted, pluged in USB, the same.

Tried to clean ROM, no luck.

The device showed "SD Image download procedure ... Failed....."

[Guest vikings123]

I tried to update to Acer_LiquidMT_3.026.01_EMEA-GEN1_03.26.02.bin

I used Acer Download tools to flash the bin file.

Everything seemed to go smoothly the point of "reboot"

The device seemed to enter Recovery mode ,, because I can feel three vibrations before it enters endless vibration loop.

The device kept vibrating ...

I tried to remove battery and put it back -- the same.

Without battery inserted, pluged in USB, the same.

Tried to clean ROM, no luck.

The device showed "SD Image download procedure ... Failed....."

The top of the screen shows a little box saying "SD Download mode"

How to get out of this?

[Guest davidevinavil]

Try to flash without adt.

On leak post there's instructions to flash it

[Guest vikings123]

Try to flash without adt.

On leak post there's instructions to flash it

my problem now is I can not get out of SD download mode

whenever i power on the device, it jump to "SD Download mode" and vibrating like a crazy bee.

[Guest karl_heinz]

my problem now is I can not get out of SD download mode

whenever i power on the device, it jump to "SD Download mode" and vibrating like a crazy bee.

had a similar issue last when tried to flash the new leak.

Put an upgrade folder ("acer_ug") on your sdcard to flash a new rom, for example from this thread

http://android.modac...ea-gen1-032701/

[Guest vikings123]

had a similar issue last when tried to flash the new leak.

Put an upgrade folder ("acer_ug") on your sdcard to flash a new rom, for example from this thread

http://android.modac...ea-gen1-032701/

I should have read this thread before I sent it back for checking.

Anyway, thanks, Pal!

[Guest merou09]

I should have read this thread before I sent it back for checking.

Anyway, thanks, Pal!

Hi Vikings,

What's about your problem ??? Solve ?

(Because some French Guy have it too with no solution for the moment...)

Thx

Merou

Edited September 6, 2011 by merou09

[Guest vikings123]

Hi Vikings,

What's about your problem ??? Solve ?

(Because some French Guy have it too with no solution for the moment...)

Thx

Merou

Yes. The problem was solved by a MB replacement from local dealer.

The device is working perfectly and smoothly.

I would suggest to install Android DK and use Acer_Download_Tools to flash BIN.

And install correct version of Vache's Recovery.

Download Superuser

This is how I did.

1. Download the BIN

2. Download Acer_Download_Tools_From_Ma

3. Flash the BIN by Acer_Download_Tools

4. Install Vache's Recovery (2.0 for 2.3.3 and 2.2 for 2.3.4)

5. Copy SuperUser to SD

6. Enter Recovery (by pressing VOLUME UP + VOLUME DOWN + FOCUS* + POWER (phone vibrates) keep all keys pressed for a few seconds, then release briefly FOCUS* and press it again.)

7. Flash superuser within Recovery.

8. Reboot

9. Download Quick Boot from Market

You are all set.

I might miss something in between.

Edited September 6, 2011 by vikings123

[Guest merou09]

Thx for your answer ;)

Merou