New kernel for Gingerbread

[Guest davidevinavil]

Hi all, finally ACER released source kernel and me whit help of Tecnolover I've managed to build a boot.img with overclock for gingerbread 4.000.07 :)

Overclock up to 1,5 Ghz, 1 % battery step, 43 fps, Ext3 and Ext4 support, tun.ko

Working on 4.000.07 roms

Boot_high_voltage.zip

Boot_mid_voltage.zip

Boot_low_voltage.zip

Lov_voltage boot has better battery drain but isn't stable for all Metal, so if you see unstability flash mid_voltage or high_voltage boot ;)

For other rom you must replace ar6000.ko in system/wify whit this one ar6000.ko

You can use adb

adb remount

adb push ar6000.ko system/wifi/ar6000.ko

adb reboot

Or you can past with root-explorer into system/wifi

Edited November 4, 2011 by davidevinavil

[Guest davidevinavil]

Reserved

[Guest !gm]

can you compile the tun kernel-module? or advice me? I don't get it...

Edited October 5, 2011 by !gm

[Guest vikings123]

Hi all, finally ACER released source kernel and me whit help of Tecnolover I've managed to build a boot.img with overclock for gingerbread 4.000.07 :)

That's great, man!

[Guest lordjubblydave]

Good News, ive been hoping this would come :)

[Guest stoorzsto]

That's great!:)

And how is the working?

[Guest davidevinavil]

For now only overclock is available ;)

[Guest zamikalo]

davidevinavil

Good news. I look forward to a good BOOT 1200

[Guest 77777]

Hello, I built a kernel 2.3, it compiles successfully, but when I'm going to zimage boot.img with mkbootimg after installation, the phone does not turn on, how do mkbootimg under acer metal. Sorry for my English.

[Guest 77777]

mkbootimg?????

[Guest davidevinavil]

Look into this tread..

Third post by Vache..

android.modaco.com/topic/332224-boot-123-mhz-to-1612mhz-undervolted-with-new-logo/page__pid__1811098__st__120#entry1811098

Edited October 6, 2011 by davidevinavil

[Guest 77777]

and it works with kernel 2.3?.

[Guest davidevinavil]

Yes

[Guest chris_kozani]

Thank you.This new kernel will have also 1% battery meter;

[Guest TechnoLover]

yes, I'm going to add it this afternoon, additionally I try to remove frame cap ;)

[Guest avv]

may I request a copy based on Gen2 (Australia/Asian) version, thx!

[Guest davidevinavil]

kernel is the same for all versions of gingerbread rom

[Guest avv]

sorry, I should state may I request a copy of Ginger_dmd_4.000.07_aosp based on Gen2 (Australia/Asian) version, thx!

[Guest bentbot]

sorry, I should state may I request a copy of Ginger_dmd_4.000.07_aosp based on Gen2 (Australia/Asian) version, thx!

Does that do anything aside from giving you Chinese text?

Both ROMs seem to work on my Aus phone.

[Guest ttt68t]

Hi Davidevinavil

Thanks, it work well in OC and battery indication, good job. But the wifi cannot be turned on.

I used the following method,is it right?

adb reboot bootloader

fastboot -i 0x0502 flash boot boot.img

fastboot -i 0x0502 reboot

[Guest davidevinavil]

Yes it's right. Which rom are you using?

[Guest stoorzsto]

I have wifi problem too.

I'm using .01 official bin.

[Guest moeaeon]

It makes MT unstable (hangs it randomly), Menu>Prefrences>Some Menu=hang

is it undervolted?

Edited October 7, 2011 by moeaeon

[Guest davidevinavil]

I have wifi problem too.

I'm using .01 official bin.

.01 which rom is?

[Guest astuermer]

I flashed the boot.img - no problems, except:

I charged my phone up to 39 percent 2 hours ago.

Now it's still 39 percent with 3G always on, Bluetooth and 5 mins of telephony.