Guest Mustafa Ahmed Posted November 18, 2011 Report Posted November 18, 2011 this method is working for gen8 too i've tested it on 101 internet tablet and it's working great , thanks :)
Guest cajl-jbmm Posted November 24, 2011 Report Posted November 24, 2011 if you want to delete the root use adb shell rm /data/local.prop
Guest hotrodder Posted November 25, 2011 Report Posted November 25, 2011 Hey all, Ive managed to install a rooted copy of the firmware into the development boot thanks to paul and letama @ xda-developers.com. First I had to apply Pauls root from here, then use letama's method to enabled the development menu (SDE THREAD LINK) and then install the rooted firmware (FIRMWARE THREAD LINK). So far, so good!
Guest cajl-jbmm Posted November 25, 2011 Report Posted November 25, 2011 On the Archos 8 Gen9, SDE+Root =
Guest rulerofkaos Posted November 26, 2011 Report Posted November 26, 2011 On the Archos 8 Gen9, SDE+Root = You rellay mean Archos 80 G9? Awesome! How did you do it, can we get a howto?
Guest cajl-jbmm Posted November 26, 2011 Report Posted November 26, 2011 Yes with letama on XDA http://forum.xda-developers.com/showthread.php?t=1361210
Guest centaurus Posted November 28, 2011 Report Posted November 28, 2011 Rich, Thank you so much for your help. Still no luck though. My Windows 7 x64 system still doesn't like the driver (although it does now seem to accept that it IS a driver for my device, it wouodn;t even admit it could find one before I made the changes you highlighted!). It now says that my MTP USB device already has the best driver installed. Device Manager calls the Archos an Archos 80 G9 not an unknown/other device so whatever default driver W7 x64 has installed seems to be preventing my attempts to replace it. Any further help will be gratefully received!! Thank you in advance! the ADB driver is a special driver, listed under the "unknown" devides. There are usually two USB interfaces detected with the ARCHOS tablets on Windows. So the G9 Archos devices have 2 different PIDs. Regards!
Guest centaurus Posted November 28, 2011 Report Posted November 28, 2011 I want to confirm, that it's actually working on the ARCHOS 101 G9 too. Tried today (needs approx. half an hour). Rooted super user, fully accessible optional Android / Linux system. Tests later. All steps applied with a Macintosh: - loading the exploits from thiis thread and making (temporary) root (step1) - installing SDE (step 2) - injecting the developer system (step 3) If there is an interest, I could compile detailled descriptive instructions and videos. To all involved: Thank you very much for the information!!! Regards.
Guest ringofan Posted December 2, 2011 Report Posted December 2, 2011 the ADB driver is a special driver, listed under the "unknown" devides. There are usually two USB interfaces detected with the ARCHOS tablets on Windows. So the G9 Archos devices have 2 different PIDs. Regards! Thanks Centaurus! Finally I have the driver installed. I'll post again if/when I get the root working. :D
Guest ArkViper Posted December 6, 2011 Report Posted December 6, 2011 Hi Rich, Thanks for your reply; absolutely spot on. I have killed & re-started the ADB daemon but I still get a blank line when I type "adb devices". I am slowly approaching my wits' end... 8-) As always, any advice will be gratefully received. I Am still having this exact same issue..
Guest jagudo Posted December 21, 2011 Report Posted December 21, 2011 I have the same problem as you had not seeing the usb in the admin devices manager. Do you remember or can you describe what you did to get around this problem? Thanks Centaurus! Finally I have the driver installed. I'll post again if/when I get the root working. :D
Guest Hughby Posted January 21, 2012 Report Posted January 21, 2012 Hi Guys I notice that this rooting process has been tried on the 101 G9. I have tried it on my 101 G9 turbo, which seems to work. I.e. I get the # sign and I can manipulate a few things. But there are a couple of issues. First I cannot set the /system/ directory as read,/write, so I cannot remove any system apps,(which is my reason for wanting a rooted tablet. Secondly, I have an issue with the rooted tablet. This is that when I let the screen timeout, i.e. go black, if I then try to start using the tablet by pressing the button on the side, the backlight comes on but there is no textb or other display. If I then reboot the tablet I am able to use it again until the screen timesout and then have the same issue. I hope this helps Hughby
Guest adis992 Posted January 23, 2012 Report Posted January 23, 2012 FileSonic went offline while in between trying to download Step 1 and 2, so i have step 1 but cannot download : "Download 'Step 2' of the root process - DOWNLOAD - MD5: dc16d0c53bc420be4b898481e31fdc2a" As FileSonic no longer shares files :(. Can anyone upload it to anothersite plz?
Guest Zirrus Posted January 26, 2012 Report Posted January 26, 2012 Hey guys, Just joined the forum, mainly because I just bought a 80 G9. I'm not new to Android development or rooting. Couple of question... with this method, is it able to 'chmod 06755' with the root shell? I assume it should be possible with root. If so, has anyone checked out the Droid 3 One Click Root Script? It seems to me that it could be edited to employ this method for the 80 G9. I intend to try it and hopefully release something that will include su/busybox/SuperUser.apk in a nice package when I get my Archos in a few days. :-)
Guest Folkert Sikkema Posted January 27, 2012 Report Posted January 27, 2012 hi paul after the root have you sound ? I also lost the sound after executing the procedure on a Windows XP laptop instead of my Windosws 7 64 laptop. I only could get the sound back by a complete factory-reset thing (Powerup with volume+ key pressed). Still no ADB on Win7-64 and still no root to have ADB over wifi... Anyone any ideas? Regards, Folkert
Guest Zirrus Posted February 1, 2012 Report Posted February 1, 2012 mahall1988 asked about my progress so I decided to post what i have... **DISCLAIMER: I HAVE NOT TESTED THIS YET AS I HAVE NOT RECEIVED MY TABLET IN THE MAIL! THIS IS COMPLETELY TRY AT YOUR OWN RISK!!**ARCHOS_G9_OneClick_Root.zip
Guest mahall1988 Posted February 1, 2012 Report Posted February 1, 2012 1st atempt running latest firmware. 3.2.79 failed part 3 of 3 * Running exploit [part 3 of 3]... remount failed: Unknown error: 0 failed to copy 'busybox' to '/system/xbin/busybox': Read-only file system failed to copy 'su' to '/system/xbin/su': Read-only file system failed to copy 'Superuser.apk' to '/system/app/Superuser.apk': Read-only file system chmod: /system/xbin/su: No such file or directory chmod: /system/xbin/busybox: No such file or directory chown: unknown user/group system:system * * ALL DONE! YOUR TABLET SHOULD BE ROOTED! after this when the screen went to sleep it would no longer wake up. so i did a factory reset which put it back to stock. next i tried to downgrade which archos dont allow (very nice of them) as my device hardware wont accept older firmware. so if anybody can provide me a way to downgrade i will try again. mahall1988 asked about my progress so I decided to post what i have... **DISCLAIMER: I HAVE NOT TESTED THIS YET AS I HAVE NOT RECEIVED MY TABLET IN THE MAIL! THIS IS COMPLETELY TRY AT YOUR OWN RISK!!**
Guest Zirrus Posted February 1, 2012 Report Posted February 1, 2012 Good to know. Because the remount failed, all the pushes failed to write to the still read-only '/system' partition. If the exploit still worked in parts 1 and 2, it should just be a matter of tweaking it some more. GOD I'd love to have my tablet here already!!
Guest Galaxyxx Posted February 17, 2012 Report Posted February 17, 2012 1st atempt running latest firmware. 3.2.79 failed part 3 of 3 * Running exploit [part 3 of 3]... remount failed: Unknown error: 0 failed to copy 'busybox' to '/system/xbin/busybox': Read-only file system failed to copy 'su' to '/system/xbin/su': Read-only file system failed to copy 'Superuser.apk' to '/system/app/Superuser.apk': Read-only file system chmod: /system/xbin/su: No such file or directory chmod: /system/xbin/busybox: No such file or directory chown: unknown user/group system:system * * ALL DONE! YOUR TABLET SHOULD BE ROOTED! after this when the screen went to sleep it would no longer wake up. so i did a factory reset which put it back to stock. next i tried to downgrade which archos dont allow (very nice of them) as my device hardware wont accept older firmware. so if anybody can provide me a way to downgrade i will try again. Well exactly same problem here on Archos 80 G9 250 GB ...... i will try to do restore and see if it will fix the problems.....
Guest clwilson Posted February 25, 2012 Report Posted February 25, 2012 When it says to place step 1 file and step 2 file in the "your current directory" What does that mean exactly? I have tried to place those in tons of locations and have no idea where that would be. I keep trying the first step and all I am getting is "cannot stat '1' : no such file or directory exists" Can someone please give me a quick hint so that I can root this Tablet :)
Guest rokky Posted March 1, 2012 Report Posted March 1, 2012 When it says to place step 1 file and step 2 file in the "your current directory" What does that mean exactly? I have tried to place those in tons of locations and have no idea where that would be. I keep trying the first step and all I am getting is "cannot stat '1' : no such file or directory exists" Can someone please give me a quick hint so that I can root this Tablet :) "Current directory" means running the adb command from the same directory in which you placed files "1" and "2" so you do not have to specify the path to their location in the command line. However, as I recall, for some versions of adb you need to specify the destination file name as well as the directory - e.g. adb push 1 /data/local/1 See if that pattern helps. Also, make sure /data/local exists on the tablet, and that it is writable. You can check that with: adb shell mount The results should show a list similar to this one from my ARchos 43: rootfs on / type rootfs (rw) /dev/mmcblk0p2 on /mnt/system type ext3 (rw,noexec,noatime,errors=continue,data=ordered) /dev/loop0 on /new-root type squashfs (ro,noatime) unionfs on / type unionfs (rw,dirs=/mnt/system/unionfs=rw:/new-root=ro) tmpfs on /dev type tmpfs (rw,mode=755) ... /dev/block/vold/179:17 on /mnt/storage/sdcard type vfat (rw,dirsync,nosuid,nodev,noexec,noatime,nodiratime,uid=1000,gid=1015,fmask=0000,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1,utf8,errors=remount-ro) ... /dev/block/mmcblk0p4 on /data type ext3 (rw,nosuid,noatime,errors=continue,data=ordered) ... The "rw" means it can be read and written, so your /data should show up with that rw, and you should be able to list the contents of /data/local with: adb shell ls -l /data/local (I cannot ls /data itself since it has permssions of drwxrwx--x). If those are not present or writeable, your Archos directory structure would not seem to be "standard" per this thread. R
Guest DECiPH3R Posted May 22, 2012 Report Posted May 22, 2012 Your one click root does not work it fails on a number of processes I'm afraid...
Guest joao carlos ramos Posted August 17, 2012 Report Posted August 17, 2012 Your one click root does not work it fails on a number of processes I'm afraid... Anyone have some more notices ....to root archos 80 g9 turbo ....I can't......
Guest MrPuddington Posted December 26, 2012 Report Posted December 26, 2012 Would this work on the Archos 80 Cobalt?
Guest Chrisund123 Posted December 26, 2012 Report Posted December 26, 2012 (edited) Would this work on the Archos 80 Cobalt? Got one from Tesco? I got mine :D I'm hoping one of the common ICS exploits will work... I'm at the in laws at the moment tho so can't play till I get home :( Edited December 26, 2012 by Chrisund123
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now