Guest Amphoras Posted October 14, 2011 Report Posted October 14, 2011 (edited) Looking at adding TPTs for stock Gen 2 devices to the TPT Helper app, but need a way to tell the difference between European and Chinese Blades first. Hopefully the code in this app should do that, so hopefully some people can test it for me and let me know the results. It works in pretty much the same way as Mr Pigfish, and should either tell you that you have a European Blade, Chinese Blade, or Unknown Blade (hopefully no one gets that). What you need to do to help: *Download the app and install it *Run it and see what type of Blade it says you have *Report back what it said, and what type you actually have (if you know) *If it said a different type or unknown, could you please type cat /proc/iomem into the terminal emulator app and reply with the output. Thanks in advance, hopefully it will work correctly first time! http://bit.ly/wINZ3K Alternative link (older version): http://www.mediafire...22fuf68ouzner7a Edited January 10, 2012 by Amphoras
Guest ThrashMan Posted October 14, 2011 Report Posted October 14, 2011 My Blade is UK Gen1 updated to Gen2. Your App says: "You have a European Blade".
Guest bogino Posted October 14, 2011 Report Posted October 14, 2011 (edited) Stock 2.2 ROM ZTE Blade Gen2, Czech distribution from End of July 2011, new accelerometer sensor. Your application says: Unknown type of Blade P.S. I made repartitioning, but after that I restored my original ROM. Edited October 14, 2011 by bogino
Guest PhenomHTX Posted October 14, 2011 Report Posted October 14, 2011 My blade is from Poland , oryginal Gen1 updated to Gen2. Your App says: "You have a European Blade".
Guest Amphoras Posted October 14, 2011 Report Posted October 14, 2011 (edited) Thanks for the replies so far :). Stock 2.2 ROM ZTE Blade, Czech distribution from End of July 2011, new accelerometer sensor. Your application says: Unknown type of Blade P.S. I made repartitioning, but after that I restored my original ROM. What do you get if you type "cat /proc/iomem" into the terminal emulator app? Edited October 14, 2011 by Amphoras
Guest BurgerZ Posted October 14, 2011 Report Posted October 14, 2011 My Blade is Chinese. I actually own a chinese blade, native gen2. Repartitioned ;-)
Guest sm4tik Posted October 14, 2011 Report Posted October 14, 2011 "You have a European Blade" Stock gen2 from Saunalahti Finland, now repartitioned :)
Guest bogino Posted October 14, 2011 Report Posted October 14, 2011 (edited) What do you get if you type "cat /proc/iomem" into the terminal emulator app? C:\Users\bogi>adb shell * daemon not running. starting it now * * daemon started successfully * $ cat /proc/iomem cat /proc/iomem 02500000-025fffff : ram_console 02600000-0fffffff : System RAM 02633000-02c71fff : Kernel text 02c9a000-02dd3087 : Kernel data 05f1c000-0611bfff : kgsl_phys_memory 20000000-2fffffff : System RAM 9c004300-9c0043ff : smc91x.0 a0000000-a001ffff : kgsl_reg_memory a0000000-a001ffff : kgsl a0200000-a0200fff : msm_serial_hs.0 a0400000-a0400fff : msm_sdcc.1 a0500000-a0500fff : msm_sdcc.2 a0800000-a08003ff : msm_hsusb a0800000-a08003ff : msm_otg a0a00000-a0a007ff : msm_nand_phys a9900000-a9900fff : msm_i2c.0 a9900000-a9900fff : msm_i2c a9c00000-a9c00fff : msm_serial.2 aa200000-aa2effff : mdp aa600000-aa600fff : pmdh $ Edited October 14, 2011 by bogino
Guest Shonk Posted October 14, 2011 Report Posted October 14, 2011 (edited) Mine Says European on a Oled San Fransisco Gen 3 Edited October 14, 2011 by Shonk
Guest kmotala Posted October 14, 2011 Report Posted October 14, 2011 Mine Says European on a Oled San Fransisco Gen 3 Gen3 ?? You download rom via Zte updater or you have custom rom ??
Guest Amphoras Posted October 14, 2011 Report Posted October 14, 2011 C:\Users\bogi>adb shell * daemon not running. starting it now * * daemon started successfully * $ cat /proc/iomem cat /proc/iomem 02500000-025fffff : ram_console 02600000-0fffffff : System RAM 02633000-02c71fff : Kernel text 02c9a000-02dd3087 : Kernel data 05f1c000-0611bfff : kgsl_phys_memory 20000000-2fffffff : System RAM 9c004300-9c0043ff : smc91x.0 a0000000-a001ffff : kgsl_reg_memory a0000000-a001ffff : kgsl a0200000-a0200fff : msm_serial_hs.0 a0400000-a0400fff : msm_sdcc.1 a0500000-a0500fff : msm_sdcc.2 a0800000-a08003ff : msm_hsusb a0800000-a08003ff : msm_otg a0a00000-a0a007ff : msm_nand_phys a9900000-a9900fff : msm_i2c.0 a9900000-a9900fff : msm_i2c a9c00000-a9c00fff : msm_serial.2 aa200000-aa2effff : mdp aa600000-aa600fff : pmdh $ Thanks, that's a good result.
Guest Amphoras Posted October 14, 2011 Report Posted October 14, 2011 Could you try this version please bogino, it should work for you too now. http://dl.dropbox.com/u/41652192/TPT%20Helper/Blade%20Checker%20v1.1.apk
Guest sheennick Posted October 15, 2011 Report Posted October 15, 2011 (edited) i have indian ZTE blade ( DELL XCD 35 )which is factory gen 2 came with 2.2 ROM and all 512 mb RAM unlocked out of the box and the app says "you have a european blade" i am pretty sure it isnt European though Edited October 15, 2011 by sheennick
Guest hedgepigdaniel Posted October 15, 2011 Report Posted October 15, 2011 i have indian ZTE blade ( DELL XCD 35 )which is factory gen 2 came with 2.2 ROM and all 512 mb RAM unlocked out of the box and the app says "you have a european blade" i am pretty sure it isnt European though The indian dell ones are the same physically as the european ones as far as I can tell.
Guest hedgepigdaniel Posted October 15, 2011 Report Posted October 15, 2011 (edited) My UK OLED blade is correctly identified as a European blade What does the app check in order to make up its mind? Can it tell between TPT upgraded Gen2 and stock/windows upgraded Gen2? Edited October 15, 2011 by hedgepigdaniel
Guest chickenfeeder Posted October 15, 2011 Report Posted October 15, 2011 TFT UK Orange San Francisco Windows-flashed to GEN 2 correctly identified as European Blade.
Guest Amphoras Posted October 15, 2011 Report Posted October 15, 2011 My UK OLED blade is correctly identified as a European blade What does the app check in order to make up its mind? Can it tell between TPT upgraded Gen2 and stock/windows upgraded Gen2? It looks at the 5th line and if it starts with 2, then it tells you you have a European Blade. Since bongio's output was different, it also looks at the 6th line of the output and if the last 10 characters are System RAM then if the line starts with 2, tells you you have a European Blade. The only Chinese /proc/iomem I have seen (from BurgerZ) did not have this line, so if the 5th line starts with 9, then it tells you you have a Chinese Blade. 20000000 - 2fffffff : System RAM is the full line. I haven't looked at differences between stock and TPT'd Gen 2 devices yet, so it doesn't know the differences between those.
Guest bogino Posted October 15, 2011 Report Posted October 15, 2011 Could you try this version please bogino, it should work for you too now. http://dl.dropbox.co...cker%20v1.1.apk 1.1 version still reports: Unknown type of Blade
Guest Amphoras Posted October 15, 2011 Report Posted October 15, 2011 1.1 version still reports: Unknown type of Blade Thanks for trying again, I think I found the problem now. Could you try this one please? http://dl.dropbox.com/u/41652192/TPT%20Helper/Blade%20Checker%20v1.2.apk
Guest bogino Posted October 16, 2011 Report Posted October 16, 2011 Amphoras, still Unknown type of Blade (version 1.2).
Guest Amphoras Posted October 16, 2011 Report Posted October 16, 2011 Amphoras, still Unknown type of Blade (version 1.2). Thanks again. I think I found where the problem was, I didn't clear the something properly, so it was giving false results. Hopefully this version should fix that. If not, it also has logging enabled, so if it still shows as Unknown, could you send me the logcat output from Blade Checker(....): Starting to Blade Checker(...): Ending. There's an app called aLogcat on the market that shows you the output and lets you save if to the sdcard.
Guest doogsville Posted October 16, 2011 Report Posted October 16, 2011 I'd like to help, I have a Chinese blade, from China Unicom, but since I live in China I can't access the file from dropbox. If I click on the link it can't connect to the site and if I use my VPN it gives me a 'bad gateway error'. Can you upload the fire to another site? I can access Mediafire and Fileupload and most of the other sites people here use, but not dropbox.
Guest Amphoras Posted October 16, 2011 Report Posted October 16, 2011 Yep, here you go http://www.mediafire.com/?22fuf68ouzner7a
Guest bogino Posted October 16, 2011 Report Posted October 16, 2011 Amphoras, version 1.3 says: You have a European Blade :)
Guest Amphoras Posted October 16, 2011 Report Posted October 16, 2011 Amphoras, version 1.3 says: You have a European Blade :) Woohoo! Thanks for the help :).
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now