Guest Blueton Posted October 24, 2011 Report Posted October 24, 2011 Just used the TPT from this post http://android.modaco.com/topic/346977-what-have-i-just-downloaded-from-ztes-site/page__st__40__gopid__1831326#entry1831326 and I had an error when it was loading at 44% and now am stuck at the green man on boot. Need some help to get it back up and running. I am not technical at all. Thanks
Guest wrtease Posted October 24, 2011 Report Posted October 24, 2011 just start again ,take battery out and power on.start afresh.
Guest Blueton Posted October 24, 2011 Report Posted October 24, 2011 just start again ,take battery out and power on.start afresh. When I take the battery out and start again it just goes to th egreen man and wont boot past it
Guest wrtease Posted October 24, 2011 Report Posted October 24, 2011 so what have you done from the start so i can help you.1 are you using windows7 or a mac.then i can try to help you.
Guest Blueton Posted October 24, 2011 Report Posted October 24, 2011 so what have you done from the start so i can help you.1 are you using windows7 or a mac.then i can try to help you. Ok. Copied this file as image to my sd card http://dl.dropbox.com/u/41652192/Skate%20TPTs/200sys-35cache-skate-tpt.zip then followed the instructions on the pdf to do the TPT flash . As it was running it had errror at 44% and when phone rebooted it got stuck, I am on Windows 7 when it is pluged into the computer the ohone is not found.
Guest wrtease Posted October 24, 2011 Report Posted October 24, 2011 okay ,are they any drivers loaded in programs and features ,uninstall then unplug usb cable then connect it back and see what happens,first thing s first.
Guest Blueton Posted October 24, 2011 Report Posted October 24, 2011 Just found the phone as android device via the control panel devices and printers.
Guest wrtease Posted October 24, 2011 Report Posted October 24, 2011 has it given it a drive letter eg drive h it should be in my computer.
Guest Blueton Posted October 24, 2011 Report Posted October 24, 2011 okay ,are they any drivers loaded in programs and features ,uninstall then unplug usb cable then connect it back and see what happens,first thing s first. Uninstalled hadset usb driver and then pluged it back in .......nothing
Guest wrtease Posted October 24, 2011 Report Posted October 24, 2011 power down phone and reboot with cable out then plug in.
Guest Blueton Posted October 24, 2011 Report Posted October 24, 2011 has it given it a drive letter eg drive h it should be in my computer. Nothing in My computer
Guest wrtease Posted October 24, 2011 Report Posted October 24, 2011 what version of windows 7 are you using.
Guest Blueton Posted October 24, 2011 Report Posted October 24, 2011 power down phone and reboot with cable out then plug in. Have taken battery out - only way to power down and pluged cable back in ............nothing no device found etc
Guest Blueton Posted October 24, 2011 Report Posted October 24, 2011 what version of windows 7 are you using. proffesional 32 bit
Guest Blueton Posted October 24, 2011 Report Posted October 24, 2011 are you using a skate or OMC . omc I can get into clockwork and that is all
Guest wrtease Posted October 24, 2011 Report Posted October 24, 2011 okay thats good.have you got a rom on your sdcard?
Guest Blueton Posted October 24, 2011 Report Posted October 24, 2011 okay thats good.have you got a rom on your sdcard? Yes cm7 I was going to onstall it after doing the TPT and was using the Bluemonye 1.8 before
Guest wrtease Posted October 24, 2011 Report Posted October 24, 2011 backup your bluemonte first then do these. okay you can install cm7 okay i would do the 4th to as i allways do this and works without any probs. okay but first you need to 1.wipe factory/data 2.wipe cache 3.go to advanced and wipe dalvick only do 4th if you get stuck at android screen 4. mounts and storage format/sysytem
Guest Blueton Posted October 24, 2011 Report Posted October 24, 2011 backup your bluemonte first then do these. okay you can install cm7 okay i would do the 4th to as i allways do this and works without any probs. okay but first you need to 1.wipe factory/data 2.wipe cache 3.go to advanced and wipe dalvick only do 4th if you get stuck at android screen 4. mounts and storage format/sysytem Ok will try now ..let you know what happens in a few mins.
Guest Blueton Posted October 24, 2011 Report Posted October 24, 2011 Ok will try now ..let you know what happens in a few mins. Ok I uminstalled that driver earlier and now it wont go into clockwork
Guest wrtease Posted October 24, 2011 Report Posted October 24, 2011 switch it of then power on with volume down hold both till clockwork shows
Guest Blueton Posted October 24, 2011 Report Posted October 24, 2011 switch it of then power on with volume down hold both till clockwork shows ok trying now
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now