Want to unlock your OMC / Skate? Tutorial here!

[Guest NJPW]

Because the port is in use. Close the qpst dowloader...

thanks

finally got there.

[Guest m33darkalex]

On the step number 12 program sends me a message "Get armprg failed." I tried everything: Installed off stock firmware (before was Cyanogen), tried to do it o another computers... Removed battery, put it again... But no results.

I have clockworkmod Recovery. May be it is a problem? I can't run FTM because CW doesnt allow me to do it. Should i remove CW? If yes, how to do it? Or how to run FTM with Clockworkmod Recovery?

Please, help!!

[Guest xiaoyaoswim]

On the step number 12 program sends me a message "Get armprg failed." I tried everything: Installed off stock firmware (before was Cyanogen), tried to do it o another computers... Removed battery, put it again... But no results.

I have clockworkmod Recovery. May be it is a problem? I can't run FTM because CW doesnt allow me to do it. Should i remove CW? If yes, how to do it? Or how to run FTM with Clockworkmod Recovery?

Please, help!!

Of course you must have stock recovery to boot into FTM. What do you think step 4 for?

[Guest m33darkalex]

Yes, of course i'm following this step (number 4, installing recovery from .bat from windows) but when my phone starting to reboot i unplug usb and remove battery, then hold button Down and in this time plug usb cable. Continuing to hold button Down i am waiting for FTM but instead of it phone rebooting a lot of times and there is an android logo on the screen... So if i back my battery to the phone the ClockWork mode appears...And no any FTM(((

What should i do? Or something wrong with unpluging cable/removing battery in my actions?

Edited December 7, 2011 by m33darkalex

[Guest Slot-9]

Yes, of course i'm following this step (number 4, installing recovery from .bat from windows) but when my phone starting to reboot i unplug usb and remove battery, then hold button Down and in this time plug usb cable. Continuing to hold button Down i am waiting for FTM but instead of it phone rebooting a lot of times and there is an android logo on the screen... So if i back my battery to the phone the ClockWork mode appears...And no any FTM(((

What should i do? Or something wrong with unpluging cable/removing battery in my actions?

Just a thought Are you holding down the -volume button & not the up or power button?

[Guest m33darkalex]

Yes, down - button.. It is the same to enter Clockwork recovery, if I can enter it the button Is right)So my problem- something else...

[Guest Slot-9]

Yes, down - button.. It is the same to enter Clockwork recovery, if I can enter it the button Is right)So my problem- something else...

When I got to stage 3 I also had to turn on mass storage other wise my phone could not be recognised? Did you get that come up on your install?

[Guest todoleo]

I used tilal6991's tutorial to unlock my own Monte Carlo. I've used the base of it and rewritten it with pictures and a slightly more newbie friendly approach.

http://www.todoleo.c...-carlo-zte.html

Please give me some feedback here or on the relevant thread. http://android.modaco.com/topic/349492-my-tutorial-for-unlocking-the-omc/ Thanks!

[Guest John Rennie]

I've unlocked my new Monte Carlo, and it went perfectly. Thanks :-)

However I've just noticed that when I use the camera the pictures have a purple cast. I didn't try the camera before unlocking so

I don't know if it was faulty when I bought it or if this is something the unlock has done. I don't really care since I've never used a phone camera, but I'd be interested to know if anyone else has seen this.

JR

[Guest dibbles]

The camera isn't the best in some light conditions, the flash can be quite brutal as well. Have a play around with the white balance settings rather than leaving it on auto.

[Guest Nozz]

I agree there is a purple hue. I have both unlocked and loaded Atomic 1.6 in the last few days so unsure whether it was like this before or not. It seems pronounced when the flash is used.

I also see a slight bug that now when I delete the last photo in my gallery, the screen freezes and I need to hit the back button to get the viewfinder back.

Edited December 8, 2011 by Nozz

[Guest xiaoyaoswim]

Yes, of course i'm following this step (number 4, installing recovery from .bat from windows) but when my phone starting to reboot i unplug usb and remove battery, then hold button Down and in this time plug usb cable. Continuing to hold button Down i am waiting for FTM but instead of it phone rebooting a lot of times and there is an android logo on the screen... So if i back my battery to the phone the ClockWork mode appears...And no any FTM(((

What should i do? Or something wrong with unpluging cable/removing battery in my actions?

The fact that you could still boot into CWM means you haven't successfully restored stock recovery in step 4. In that step your phone should reboot twice and do not unplug usb cable until the whole process succesfully finishs.

[Guest Atomix86]

Ok I followed the guide perfectly but now wifi won't connect and it has set my Mac address to 11.22.33.44.55.66 what's going on?

[Guest xiaoyaoswim]

Ok I followed the guide perfectly but now wifi won't connect and it has set my Mac address to 11.22.33.44.55.66 what's going on?

Have you successfully restored the QCN file by QPST?

[Guest Atomix86]

Have you successfully restored the QCN file by QPST?

I did indeed, but I am going to try again before anything else, thanks for the tip :).

EDIT: I re-restored the QCN file and it now works perfectly! Thank you so, so much, I'll pop a little thank you gift in your PayPal as soon as I get paid!

Edited December 8, 2011 by Atomix86

[Guest Ultram3jor]

Hi guys!

Can u helpme please? Im on the 13. step, i pressed "START" button, and it does not work, ratio is 1/100 and i think is stoped, but im not sure (i started +/-20 min ago), i dont want do any mistakes (exit program, remove usb connection, etc.), What can i do?

[Guest wrtease]

well if it does not move then you need to start again .start at step 6 and best of luck.

[Guest Ultram3jor]

well if it does not move then you need to start again .start at step 6 and best of luck.

i restarted pc, and all stesp from the 1st.... now vodafone HU, yeah i did it! :) One more question, can i restore this unlock thing, to be "locked" again?

And thanks a lost for the tutorial u r awesome! :)

[Guest wrtease]

no that i no off. thats it unlocked for good.

no thank the

op

xiaoyaoswim

Edited December 8, 2011 by wrtease

[Guest Ultram3jor]

no that i no off. thats it unlocked for good.

no thank the

op

xiaoyaoswim

oh, warranty gb :\

i said thx to all who worked for the solution in general :)

[Guest wrtease]

all you can do for warrinty is use stock rom .and tell orange nothing.

[Guest Ultram3jor]

well im not sure in it :s tmobile sux, but zte gives us 2y of warranty so i hope there will be no problem with it. anyway, it works and im so happy and i stop spamming the forum :)

[Guest xiaoyaoswim]

I did indeed, but I am going to try again before anything else, thanks for the tip :).

EDIT: I re-restored the QCN file and it now works perfectly! Thank you so, so much, I'll pop a little thank you gift in your PayPal as soon as I get paid!

Glad to hear you made it. You are welcome.

[Guest veru]

Hi guys

at step 3 and just keep getting <waiting for device>

downloaded the usb drivers installed and rebooted

any ideas?

cheers

[Guest veru]

Hi guys

at step 3 and just keep getting <waiting for device>

downloaded the usb drivers installed and rebooted

any ideas?

cheers