Want to unlock your OMC / Skate? Tutorial here!

[Guest D3abL3]

@tilal6991

To enter FTM mode, in my case, you need to hold pressed 'volume down' button, not the 'volume up'.

It was a misspelling from Lalit's part.

[Guest]

2 secs - I'm uploading the fix now.

To be clear,it says wrong boot.mbn

It does not say boot.img

[Guest D3abL3]

To be clear,it says wrong boot.mbn

It does not say boot.img

Go on files folder and rename it to "boot.img" and post the exact file size to see if it matches.

Correct one must have: 3.614.720 bytes / 3,44 MB / 3.530 KB

Edited November 11, 2011 by D3abL3

[Guest]

in files, boot.img shows no file size ?

[Guest tilal6991]

in files, boot.img shows no file size ?

Yep - I did that to reduce file size. It was intentional. I am uploading the fixed files now - 23%

[Guest D3abL3]

I read someone's post asking if I used this(on this thread) method.

I didn't, I used the original method with original files from original sources. But this is the same deal, just the files were messed up. ;)

[Guest tillaz]

I read someone's post asking if I used this(on this thread) method.

I didn't, I used the original method with original files from original sources. But this is the same deal, just the files were messed up. ;)

wot android version did your phone ship with, 2.3.5 ???

[Guest tillaz]

can anyone confirm that after unlocking there phone, this *983*0# no longer works ???

Edited November 11, 2011 by tillaz

[Guest D3abL3]

wot android version did your phone ship with, 2.3.5 ???

Correction: It was 2.3.4. Why?

Now I'm sort of confused if it was 2.3.4 or 2.3.5.... Will you make me restore the backup of my shipped stock rom to confirm? <_<

Edited November 11, 2011 by D3abL3

[Guest tillaz]

Correction: It was 2.3.4. Why?

just thought it might have something to do with why you don't get that pop up..

[Guest wrtease]

*983*0# no longer works can confirm.

[Guest putbinoot]

Could not get into FTM mode but it looks like it should be volume down, should i be waiting for this new boot.img fix and i am on 2.3.4 with bluemonte rom does that make a difference.

[Guest]

Yep - I did that to reduce file size. It was intentional. I am uploading the fixed files now - 23%

where will you be uploading fix tilal ?

[Guest tillaz]

Correction: It was 2.3.4. Why?

Now I'm sort of confused if it was 2.3.4 or 2.3.5.... Will you make me restore the backup of my shipped stock rom to confirm? <_<

i think it might of shipped on 2.3.5 if this has never worked for you *983*0#

as it now seems to not work for shipped 2.3.4 users after doing the unlock that is based on 2.3.5 stuff

could be why your not getting that pop up...

Edited November 11, 2011 by tillaz

[Guest]

i think it might of shipped on 2.3.5 if this has never worked for you *983*0#

as it now seems to not work for shipped 2.3.4 users after doing the unlock that is based on 2.3.5 stuff

could be why your not getting that pop up...

will this mean we cannot calibrate ?

[Guest zToni]

when i try flash stock recovery and run .bat file, phone is rebooting, but flash not starting, and i see "waiting for device"

If i see "FTM" - that mean, i flashed stock recovery?

[Guest putbinoot]

i think it might of shipped on 2.3.5 if this has never worked for you *983*0#

as it now seems to not work for shipped 2.3.4 users after doing the unlock that is based on 2.3.5 stuff

could be why your not getting that pop up...

I am on 2.3.4 running bluemonte have only flashed stock recovery and *983*0# returns "connection problem or invalid MMI code" phone is not connected to computer not sure if it needs to be to run that code as i don't know what it should return.

[Guest tilal6991]

when i try flash stock recovery and run .bat file, phone is rebooting, but flash not starting, and i see "waiting for device"

If i see "FTM" - that mean, i flashed stock recovery?

did you CWM installed before?

[Guest tillaz]

will this mean we cannot calibrate ?

not using that method no.. but there should be other ways, there is an app in lalits cm7 rom should do it

Edited November 11, 2011 by tillaz

[Guest xiaoyaoswim]

@tilal6991

To enter FTM mode, in my case, you need to hold pressed 'volume down' button, not the 'volume up'.

It should be 'volume down' .

[Guest tilal6991]

Yep fixed in tut.

[Guest tillaz]

I am on 2.3.4 running bluemonte have only flashed stock recovery and *983*0# returns "connection problem or invalid MMI code" phone is not connected to computer not sure if it needs to be to run that code as i don't know what it should return.

it should give a list of hardware tests to preform

[Guest ninjagordy]

right...im getting no where, i started using tillals method a reflashed the stock rom from cwm7.... so...now when i try this method i get waiting for device.... if i try tillas method it asks for the file i posted earlier...all help appreciated before i brick this...lol

Edited November 11, 2011 by ninjagordy

[Guest tillaz]

right...im getting no where, i started using tillals method a reflashed the stock rom from cwm7.... so...now when i try this method i get waiting for device.... if i try tillas method it asks for the file i posted earlier...all help appreciated before i brick this...lol

waiting for device ? do you have debugging turned on ?

[Guest wrtease]

so whhere r u up to .r u in ftm mode or are you by with unlock or just starting .