Jump to content

TripNiCE - Ice Cream Sandwich Discussion Thread | Latest - TR001B


Guest Arz Bhatia

Recommended Posts

Guest Vexation

Hey Trip is bluetooth working in this new release? It was not mentioned in the working list.

If something as significant as Bluetooth funtioning isn't listed in the working list, you can pretty much assume it is not working.

Link to comment
Share on other sites

Guest leeskywalker

Let me tell you another thing, in most roms i dont match the complete ril to the radio. I cant recall if i did it in this version, but mostly you dont find the official ril in my roms. If you verify the filesizes you (should) notice my files are smaller.

If you say better battery life then you must have some numbers and facts to support youre oppinion right? And i dont mean some random tought "i got 6 hours moderate usage" no i mean hard fact, straight to the point.

If you have those and you do this with YOUR phone and you test different radio's and you use the phone EXACTLY the same way everytime then you will see that is bullshit and there wont be much difference. I didnt notice anything to improve battery life in any (new) HTC files. Just another fairytail that i dont belive in.

Guess what? I hardly have troubles with my phone and it flashes maybe 20-30 times a day. And if read trough forums its stunning how much troubles people have and complaining and in 90% of the cases THEY messed up everything themselfs. Why? Because of the fairytailes.

Feel free to prove me wrong about it. No offence tough

No offence taken i was just trying to match up radio to ril as there was no recommended in the op. As for battey life with your rom, before updating to latest firmware and radio i was getting barely 7 hours of moderate use and after im back to a good 15 i cant give you exact figures and facts on this sorry, im just speaking from an end user point of view . I dont mean to offend you or undermime anything your saying sorry if it came across that way

Link to comment
Share on other sites

Guest tatico28

If something as significant as Bluetooth funtioning isn't listed in the working list, you can pretty much assume it is not working.

My only concern with bluetooth is that, the company I work for has a policy that if they find an employee using an cellphone while driving that employee could get fired, and you imagin Im on the road 85% of the time; so for me bluetooth is a must have, thanks anyway :(

Link to comment
Share on other sites

Guest Basil3

My only concern with bluetooth is that, the company I work for has a policy that if they find an employee using an cellphone while driving that employee could get fired, and you imagin Im on the road 85% of the time; so for me bluetooth is a must have, thanks anyway

Are wired hands-free units not allowed?

Link to comment
Share on other sites

Guest MartijnGP

Then you have a crap one. They are generally better and cheaper, mainly because they are wired. Bandwidth over bluetooth is very limited.

Edited by MartijnGP
Link to comment
Share on other sites

Guest Adrieono

lol, i find it funny how every posts on twitter that he's fixed it, and another release soon, but posts a new tweet saying something broke and postpone it. sheesh, don't boast. say something when you've fixed it.

You could always cook up roms yourself... It's good he does that instead of just leaving us in the dark like some developers.

Link to comment
Share on other sites

Guest tatico28
Then you have a crap one. They are generally better and cheaper, mainly because they are wired. Bandwidth over bluetooth is very limited.

It came with a blackberry Bold that my wife used to have, its pretty good though! .

Link to comment
Share on other sites

Guest Hariberu

hey guys,

i'm currently on arhd 5.0.2 where I flashed the 1.20 firmware and new radio as recommended. Will i have to revert back to the old firmware/radio in order to use trip's rom?

Link to comment
Share on other sites

Guest Vexation

hey guys,

i'm currently on arhd 5.0.2 where I flashed the 1.20 firmware and new radio as recommended. Will i have to revert back to the old firmware/radio in order to use trip's rom?

No

Link to comment
Share on other sites

Guest tunatje

90x90xav_normal.jpgTripNRaVeR Noeri ... maybe a good dinner will fix the brain up again, back after dinner

90x90xav_normal.jpgTripNRaVeR Noeri ... seems it cant be fixed anymore, cant just put hack on hack to release 4.0.3 this bug or no hw buttons, both is crap, maybe end of #TripNiCE

90x90xav_normal.jpgTripNRaVeR Noeri ... aah hell you gotta be kiddin me [-_-]' release on hold untill further notice

90x90xav_normal.jpgTripNRaVeR Noeri ... I think i found my superior... bluetooth blegh

Link to comment
Share on other sites

Guest Zehlek

hey guys,

i'm currently on arhd 5.0.2 where I flashed the 1.20 firmware and new radio as recommended. Will i have to revert back to the old firmware/radio in order to use trip's rom?

Nope I am using Trips with the updated firmware

Link to comment
Share on other sites

Guest pjv1001

Got this strange issue where the phone just turns off whenever the phone is use to send an sms or call I didn't test data because I don't use that anyways here's a logcat I took

V/AudioHardwareMSM8660( 136): sample_rate: 44100

V/AudioHardwareMSM8660( 136): Enable PCM Dump function: 0

V/AudioHardwareMSM8660( 136): dec_id = 1

D/AudioHardwareMSM8660( 136): curr_out_device = 2

V/AudioHardwareMSM8660( 136): curr_out_device for pcm playback = 2

V/AudioHardwareMSM8660( 136): android::status_t android_audio_legacy::update_ai

c3254_info(int, int, bool) RX 2 TX -1 mode 0++

D/AudioHardwareMSM8660( 136): read batter temp = 246

V/AudioHardwareMSM8660( 136): android::status_t android_audio_legacy::update_ai

c3254_info(int, int, bool) rx:2-id=0 tx:79304-id=0

D/AudioHardwareMSM8660( 136): enableDevice(2 1)

I/ActivityManager( 238): START {act=android.intent.action.CALL_PRIVILEGED dat=t

el:xxxxxxxxxxxx cmp=com.android.phone/.PrivilegedOutgoingCallBroadcaster (has ex

tras)} from pid 1391

V/AudioHardwareMSM8660( 136): getACDB, mode =1 return ID 15 snd_dev = 1

D/AudioHardwareMSM8660( 136): ACDB -> send_audio_cal, acdb_id = 15, path = 0

V/AudioHardwareMSM8660( 136): ACDB -> send_audtable

D/AudioHardwareMSM8660( 136): ACDB -> ACDB_CMD_GET_AUDPROC_COMMON_TABLE

D/AudioHardwareMSM8660( 136): ACDB -> AUDIO_SET_AUDPROC_CAL

V/AudioHardwareMSM8660( 136): ACDB -> send_audvoltable

D/AudioHardwareMSM8660( 136): ACDB -> ACDB_CMD_GET_AUDPROC_GAIN_DEP_VOLTBL_STEP

_COPP

D/AudioHardwareMSM8660( 136): ACDB -> AUDIO_SET_AUDPROC_VOL_CAL

V/AudioPolicyManagerBase( 136): stopOutput() output 1, stream 1, session 41

V/AudioPolicyManagerBase( 136): changeRefCount() stream 1, count 0

V/AudioPolicyManagerBase( 136): getNewDevice() selected device 0

V/AudioPolicyManagerBase( 136): setOutputDevice() output 1 device 0 delayMs 108

V/AudioPolicyManagerBase( 136): setOutputDevice() setting same device 0 or null

device for output 1

V/AudioHardwareMSM8660( 136): AudioStreamOutMSM72xx::write(0x1a418, 4800) dev =

2

D/MP-Decision( 649): UP Nw:2.700000 Tw:180 rq:3.100000 seq:198

E/ThermalDaemon( 648): Maximum CPU[1] frequency 1536000 KHz

D/PhoneUtils( 491): checkAndCopyPhoneProviderExtras: some or all extras are mis

sing.

D/PhoneUtils( 491): checkAndCopyPhoneProviderExtras: some or all extras are mis

sing.

I/ActivityManager( 238): START {act=com.android.phone.SIP_SELECT_PHONE dat=tel:

xxxxxxxxxxxx flg=0x10000000 cmp=com.android.phone/.SipCallOptionHandler (has ext

ras)} from pid 491

I/WindowManager( 238): createSurface Window{417d9aa8 Starting com.android.phone

paused=false}: DRAW NOW PENDING

D/memalloc( 133): /dev/pmem: Allocated buffer base:0x418e5000 size:2088960 offs

et:4177920 fd:21

D/memalloc( 238): /dev/pmem: Mapped buffer base:0x50450000 size:6266880 offset:

4177920 fd:282

D/CallController( 491): placeCall()... intent = Intent { act=android.intent.ac

tion.CALL dat=tel:xxxxxxxxxxxx (has extras) }

D/OpenGLRenderer( 1391): Flushing caches (mode 1)

I/HeadsetService( 713): After phone call off-hook: disable DSP.

I/HeadsetService( 713): Selected configuration: disable

D/AudioHardwareMSM8660( 136): ======= setMode from 0 to 2 ======

D/AudioHardwareInterface( 136): setMode(IN_CALL)

D/AudioPolicyManager( 136): getDeviceForStrategy() strategy 1, device 1, a2dpou

tput 0, force_use config (0, 0, 0, 0)

V/AudioPolicyManagerBase( 136): getNewDevice() selected device 1

D/AudioPolicyManager( 136): getDeviceForStrategy() from cache strategy 4, devic

e 2

W/AudioPolicyManager( 136): getDeviceForStrategy() unknown strategy: 4

D/AudioPolicyManager( 136): getDeviceForStrategy() strategy 4, device 0, a2dpou

tput 0, force_use config (0, 0, 0, 0)

D/AudioPolicyManager( 136): getDeviceForStrategy() from cache strategy 1, devic

e 1

D/AudioPolicyManager( 136): getDeviceForStrategy() strategy 1, device 1, a2dpou

tput 0, force_use config (0, 0, 0, 0)

D/AudioPolicyManager( 136): getDeviceForStrategy() from cache strategy 2, devic

e 2

D/AudioPolicyManager( 136): getDeviceForStrategy() strategy 1, device 1, a2dpou

tput 0, force_use config (0, 0, 0, 0)

D/AudioPolicyManager( 136): getDeviceForStrategy() strategy 2, device 1, a2dpou

tput 0, force_use config (0, 0, 0, 0)

D/AudioPolicyManager( 136): getDeviceForStrategy() from cache strategy 0, devic

e 2

D/AudioPolicyManager( 136): (mAvailableOutputDevice, device2) = (3, 0)

D/AudioPolicyManager( 136): getDeviceForStrategy() strategy 1, device 1, a2dpou

tput 0, force_use config (0, 0, 0, 0)

D/AudioPolicyManager( 136): getDeviceForStrategy() strategy 0, device 0, a2dpou

tput 0, force_use config (0, 0, 0, 0)

D/AudioPolicyManager( 136): getDeviceForStrategy() from cache strategy 3, devic

e 2

D/AudioPolicyManager( 136): getDeviceForStrategy() strategy 3, device 1, a2dpou

tput 0, force_use config (0, 0, 0, 0)

D/AudioPolicyManager( 136): (mAvailableOutputDevice, device2) = (3, 0)

D/AudioPolicyManager( 136): getDeviceForStrategy() strategy 1, device 1, a2dpou

tput 0, force_use config (0, 0, 0, 0)

D/AudioPolicyManager( 136): getDeviceForStrategy() strategy 0, device 0, a2dpou

tput 0, force_use config (0, 0, 0, 0)

D/AudioPolicyManager( 136): getDeviceForStrategy() strategy 1, device 1, a2dpou

tput 0, force_use config (0, 0, 0, 0)

D/AudioPolicyManager( 136): getDeviceForStrategy() strategy 1, device 1, a2dpou

tput 0, force_use config (0, 0, 0, 0)

D/AudioPolicyManager( 136): getDeviceForStrategy() strategy 2, device 1, a2dpou

tput 0, force_use config (0, 0, 0, 0)

D/AudioPolicyManager( 136): getDeviceForStrategy() strategy 3, device 1, a2dpou

tput 0, force_use config (0, 0, 0, 0)

W/AudioPolicyManager( 136): getDeviceForStrategy() unknown strategy: 4

D/AudioPolicyManager( 136): getDeviceForStrategy() strategy 4, device 0, a2dpou

tput 0, force_use config (0, 0, 0, 0)

V/AudioPolicyManagerBase( 136): setOutputDevice() output 1 device 1 delayMs 0

I/ActivityManager( 238): Start proc com.alienmanfc6.wheresmyandroid for broadca

st com.alienmanfc6.wheresmyandroid/.CallReceiver: pid=2474 uid=10088 gids={3003,

1015}

I/AudioHardwareMSM8660( 136): AudioStreamOutMSM72xx::setParameters() routing=1

V/AudioHardwareMSM8660( 136): set output routing 1

I/AudioHardwareMSM8660( 136): Routing audio to Handset

V/AudioHardwareMSM8660( 136): doAudioRouteOrMute() device 0, mMode 2, mMicMute

1

V/AudioHardwareMSM8660( 136): do_route_audio_rpc(0, 0, 1)

V/AudioHardwareMSM8660( 136): In HANDSET

D/AudioHardwareMSM8660( 136): new_rx = 0

D/AudioHardwareMSM8660( 136): new_tx = 1

D/AudioHardwareMSM8660( 136): doTpa2051_Control mode = 9 rc = -1

V/AudioHardwareMSM8660( 136): is RxChanged = 1

V/AudioHardwareMSM8660( 136): android::status_t android_audio_legacy::updateDev

iceInfo(int, int, bool, bool, int) (cur_rx, cur_tx, new_rx, new_tx) = (2, 3, 0,

1)

V/AudioHardwareMSM8660( 136): 1. De-route Stream/Voice

V/AudioHardwareMSM8660( 136): VOICE_CALL 0

V/AudioHardwareMSM8660( 136): FM_RADIO 0

V/AudioHardwareMSM8660( 136): PCM_PLAY 1

V/AudioHardwareMSM8660( 136): PCM_REC 0

V/AudioHardwareMSM8660( 136): De-route PCM_PLAY stream (dec 1, dev 2)

E/HeadsetService( 713): Invalid argument error in setParameter(1000, (short) 10

000) == -4

V/AudioHardwareMSM8660( 136): 2. Route Stream/Voice OR Update Table

V/AudioHardwareMSM8660( 136): ==== Voice Call Start====

I/AudioHardwareMSM8660( 136): Starting voice on Rx 0 and Tx 1 device

V/AudioHardwareMSM8660( 136): getACDB, mode =4 return ID 7 snd_dev = 0

V/AudioHardwareMSM8660( 136): getACDB, mode =3 return ID 4 snd_dev = 0

D/AudioHardwareMSM8660( 136): ACDB -> send_voice_cal, acdb_rx = 7, acdb_tx = 4

D/AudioHardwareMSM8660( 136): ACDB -> ACDB_CMD_GET_VOCPROC_COMMON_TABLE

D/ACDB ( 136): ACDBDATA_GET_VOC_PROC_CMN_LOOKUP_KEY (0)

D/ACDB ( 136): ACDBDATA_GET_VOC_PROC_CMN_LOOKUP_KEY (0)

D/AudioHardwareMSM8660( 136): ACDB -> ACDB_CMD_GET_VOCPROC_COMMON_TABLE

D/ACDB ( 136): ACDBDATA_GET_VOC_PROC_CMN_LOOKUP_KEY (0)

D/ACDB ( 136): ACDBDATA_GET_VOC_PROC_CMN_LOOKUP_KEY (0)

D/AudioHardwareMSM8660( 136): ACDB -> ACDB_CMD_GET_VOCPROC_COMMON_TABLE

D/ACDB ( 136): ACDBDATA_GET_VOC_PROC_CMN_LOOKUP_KEY (0)

D/ACDB ( 136): ACDBDATA_GET_VOC_PROC_CMN_LOOKUP_KEY (0)

D/AudioHardwareMSM8660( 136): ACDB -> ACDB_CMD_GET_VOCPROC_COMMON_TABLE

D/ACDB ( 136): ACDBDATA_GET_VOC_PROC_CMN_LOOKUP_KEY (0)

D/ACDB ( 136): ACDBDATA_GET_VOC_PROC_CMN_LOOKUP_KEY (0)

D/AudioHardwareMSM8660( 136): ACDB -> ACDB_CMD_GET_VOCPROC_COMMON_TABLE

D/ACDB ( 136): ACDBDATA_GET_VOC_PROC_CMN_LOOKUP_KEY (0)

D/ACDB ( 136): ACDBDATA_GET_VOC_PROC_CMN_LOOKUP_KEY (0)

D/AudioHardwareMSM8660( 136): ACDB -> ACDB_CMD_GET_VOCPROC_COMMON_TABLE

D/ACDB ( 136): ACDBDATA_GET_VOC_PROC_CMN_LOOKUP_KEY (0)

D/ACDB ( 136): ACDBDATA_GET_VOC_PROC_CMN_LOOKUP_KEY (0)

D/AudioHardwareMSM8660( 136): ACDB -> AUDIO_SET_VOCPROC_CAL

D/AudioHardwareMSM8660( 136): ACDB -> ACDB_CMD_GET_VOCPROC_STREAM_TABLE

D/AudioHardwareMSM8660( 136): ACDB -> ACDB_CMD_GET_VOCPROC_STREAM_TABLE

D/AudioHardwareMSM8660( 136): ACDB -> ACDB_CMD_GET_VOCPROC_STREAM_TABLE

D/AudioHardwareMSM8660( 136): ACDB -> ACDB_CMD_GET_VOCPROC_STREAM_TABLE

D/AudioHardwareMSM8660( 136): ACDB -> ACDB_CMD_GET_VOCPROC_STREAM_TABLE

D/AudioHardwareMSM8660( 136): ACDB -> ACDB_CMD_GET_VOCPROC_STREAM_TABLE

D/AudioHardwareMSM8660( 136): ACDB -> AUDIO_SET_VOCPROC_STREAM_CAL

D/AudioHardwareMSM8660( 136): ACDB -> ACDB_CMD_GET_VOCPROC_GAIN_DEP_VOLTBL

D/AudioHardwareMSM8660( 136): ACDB -> ACDB_CMD_GET_VOCPROC_GAIN_DEP_VOLTBL

D/AudioHardwareMSM8660( 136): ACDB -> ACDB_CMD_GET_VOCPROC_GAIN_DEP_VOLTBL

D/AudioHardwareMSM8660( 136): ACDB -> ACDB_CMD_GET_VOCPROC_GAIN_DEP_VOLTBL

D/AudioHardwareMSM8660( 136): ACDB -> ACDB_CMD_GET_VOCPROC_GAIN_DEP_VOLTBL

D/AudioHardwareMSM8660( 136): ACDB -> ACDB_CMD_GET_VOCPROC_GAIN_DEP_VOLTBL

D/AudioHardwareMSM8660( 136): ACDB -> AUDIO_SET_VOCPROC_VOL_CAL

D/AudioHardwareMSM8660( 136): ACDB -> Sent VocProc Cal!

I/AudioHardwareMSM8660( 136): Starting voice call and UnMuting the call

I/AudioHardwareMSM8660( 136): Device switch during pcm play (old dev 2, new dev

0)

V/AudioHardwareMSM8660( 136): getACDB, mode =1 return ID 7 snd_dev = 0

D/AudioHardwareMSM8660( 136): ACDB -> send_audio_cal, acdb_id = 7, path = 0

V/AudioHardwareMSM8660( 136): ACDB -> send_audtable

D/AudioHardwareMSM8660( 136): ACDB -> ACDB_CMD_GET_AUDPROC_COMMON_TABLE

D/AudioHardwareMSM8660( 136): ACDB -> AUDIO_SET_AUDPROC_CAL

V/AudioHardwareMSM8660( 136): ACDB -> send_audvoltable

D/AudioHardwareMSM8660( 136): ACDB -> ACDB_CMD_GET_AUDPROC_GAIN_DEP_VOLTBL_STEP

_COPP

D/AudioHardwareMSM8660( 136): ACDB -> AUDIO_SET_AUDPROC_VOL_CAL

V/AudioHardwareMSM8660( 136): android::status_t android_audio_legacy::updateDev

iceInfo(int, int, bool, bool, int) Disable Current Device (cur_tx, cur_rx, isRxC

hanged, needRxReconfig) = (2, 3, 1, 1)

D/AudioHardwareMSM8660( 136): enableDevice(2 0)

D/OpenGLRenderer( 1391): Flushing caches (mode 0)

D/memalloc( 1391): /dev/pmem: Unmapping buffer base:0x4bcfd000 size:12324864 off

set:10235904

D/memalloc( 1391): /dev/pmem: Unmapping buffer base:0x4d3ba000 size:2088960 offs

et:0

D/memalloc( 1391): /dev/pmem: Unmapping buffer base:0x4d5b8000 size:4177920 offs

et:2088960

D/memalloc( 133): /dev/pmem: Freeing buffer base:0x422a8000 size:2088960 offset

:10235904 fd:25

D/memalloc( 133): /dev/pmem: Freeing buffer base:0x41ae3000 size:2088960 offset

:2088960 fd:29

D/Where's My Droid( 2474): Responding: load

D/AudioHardwareMSM8660( 136): enableDevice(3 0)

D/AudioHardwareMSM8660( 136): android::status_t android_audio_legacy::updateDev

iceInfo(int, int, bool, bool, int) Enable New Device (VOICE_CALL, PCM_PLAY, FM_R

ADIO, LPA_DECODE) = (1, 1, 0, 0)

V/AudioHardwareMSM8660( 136): android::status_t android_audio_legacy::update_ai

c3254_info(int, int, bool) RX 0 TX 1 mode 0++

V/AudioHardwareMSM8660( 136): android::status_t android_audio_legacy::update_ai

c3254_info(int, int, bool) rx:0-id=0 tx:1-id=0

I/HTC Acoustic( 136): set_audio_effect: Phone_Handset_Dualmic

I/HTC Acoustic( 136): set_audio_effect: match with name Phone_Handset_Dualmic (

4)

D/Where's My Droid( 2474): Responding: onStart

D/Where's My Droid( 2474): Responding: loadSettings

D/Where's My Droid( 2474): Responding: Load success

D/Where's My Droid( 2474): Responding: Get bundle passed from SMS Receiver

D/Where's My Droid( 2474): Responding: From: <call>

D/Where's My Droid( 2474): Message: null

D/Where's My Droid( 2474): Responding: from a call

D/Where's My Droid( 2474): Responding: call function not enabled

D/Where's My Droid( 2474): Responding: Stopping service

D/Where's My Droid( 2474): Responding: save

I/HTC Acoustic( 136): found enabled DSP firmwares and return 0

I/AudioHardwareMSM8660( 136): aic3254_config: sound effect (Phone_Handset_Dualm

ic) 0 0 2

D/AudioHardwareMSM8660( 136): enableDevice(0 1)

D/AudioHardwareMSM8660( 136): enableDevice(1 1)

V/AudioHardwareMSM8660( 136): updateDeviceInfo END, curr_out_device = 0, curr_m

ic_device = 1

V/AudioPolicyManagerBase( 136): applyStreamVolumes() for output 1 and device 1

V/AudioPolicyManagerBase( 136): VOLUME vol index=[66 100 100], dB=[-17.0 0.0 0.

0] ampl=1.00000

V/AudioPolicyManagerBase( 136): VOLUME vol index=[66 85 100], dB=[-17.0 -7.5 0.

0] ampl=0.42170

V/AudioPolicyManagerBase( 136): setStreamVolume() for output 1 stream 4, volume

0.421697, delay 0

V/AudioPolicyManagerBase( 136): checkAndSetVolume() cannot set stream 6 volume

with force use = 0 for comm

V/AudioPolicyManagerBase( 136): VOLUME vol index=[66 100 100], dB=[-17.0 0.0 0.

0] ampl=1.00000

V/AudioPolicyManagerBase( 136): handleIncallSonification() stream 2 starting 1

device 1 stateChange 1

V/AudioPolicyManagerBase( 136): handleIncallSonification() stream 4 starting 1

device 1 stateChange 1

V/AudioPolicyManagerBase( 136): handleIncallSonification() stream 5 starting 1

device 1 stateChange 1

I/AudioService( 238): AudioFocus requestAudioFocus() from AudioFocus_For_Phon

e_Ring_And_Calls

V/AudioPolicyManagerBase( 136): setStreamVolumeIndex() stream 0, index 5

V/AudioPolicyManagerBase( 136): VOLUME vol index=[66 100 100], dB=[-17.0 0.0 0.

0] ampl=1.00000

D/Sensors ( 238): Enabling Proximity Sensor..., mEnabled = 0, new state = 1

D/Sensors ( 238): Reading Proximity Sensor..., count = 96

D/Sensors ( 238): Reading Proximity Sensor..., distance = 38654705664.000000

D/Sensors ( 238): Reading Proximity Sensor...mEnabled = 0

D/Sensors ( 238): Reading Proximity Sensor..., count = 96

D/Sensors ( 238): Reading Proximity Sensor..., distance = 9.000000

D/Sensors ( 238): Reading Proximity Sensor...mEnabled = 0

V/AudioPolicyManagerBase( 136): setStreamVolumeIndex() stream 8, index 15

V/AudioPolicyManagerBase( 136): VOLUME vol index=[66 100 100], dB=[-17.0 0.0 0.

0] ampl=1.00000

D/Sensors ( 238): Enabling Proximity Sensor..., mEnabled = 1

D/Sensors ( 238): Setting initial state for Proximity Sensor

D/Sensors ( 238): Reading Proximity Sensor..., count = 96

I/ActivityManager( 238): START {act=android.intent.action.MAIN flg=0x10840000 c

mp=com.android.phone/.InCallScreen} from pid 491

I/WindowManager( 238): createSurface Window{4185e560 Starting com.android.phone

paused=false}: DRAW NOW PENDING

D/memalloc( 133): /dev/pmem: Allocated buffer base:0x418e5000 size:2088960 offs

et:2088960 fd:25

D/AccelerometerListener( 491): enable(true)

D/SensorGUI( 238): SensorChannel(): mSendFd = 294, mReceiveFd = 293

D/SensorGUI( 491): SensorChannel(const Parcel& data): mSendFd = -1, mReceiveFd

= 74

D/Sensors ( 238): handle : 4 en: 1, v010.0 - Try to resolve lock issue

D/Sensors ( 238): lock_status = 59

D/Sensors ( 238): Andy: MPLSensor::enable: lock1

D/memalloc( 238): /dev/pmem: Mapped buffer base:0x50a4a000 size:4177920 offset:

2088960 fd:297

D/Sensors ( 238): mEnabled = 0x10

D/Sensors ( 238): set_power_states++: enabled_sensors: 16 dmp_started: 0

D/Sensors ( 238): Before if statment: cs:1 rs:1 en_ped:0 da_ped:0 en_g:0 da_g:0

D/Sensors ( 238): MLSetMPUSensors: 70

D/PhoneStatusBar( 331): disable: < expand icons ALERTS* ticker system_info back

home recent clock >

I/MPL-ml ( 238): Actual ODR: 25 Hz

D/Sensors ( 238): Exit: MLSetMPUSensors: 70

D/Sensors ( 238): STOP timerirq_1

D/memalloc( 133): /dev/pmem: Freeing buffer base:0x418e5000 size:2088960 offset

:0 fd:27

D/Sensors ( 238): Starting DMP

I/ ( 238): mpu3050_resume: Resuming to 0070

D/Sensors ( 238): Exit: Starting DMP

D/Sensors ( 238): set_power_states--

D/Sensors ( 238): Andy: MPLSensor::enable: unlock1

D/Sensors ( 238): Use Gyro!

D/Sensors ( 238): MPLSensor::enable--1

D/Sensors ( 238): (llu)G_Delay = 200

I/ ( 238): mpu3050_resume: Resuming to 0070

I/ ( 238): mpu3050_suspend: suspending sensors to 0070

I/ ( 238): mpu3050_suspend: Will resume next to 0070

I/MPL-ml ( 238): Actual ODR: 25 Hz

I/InCallScreen( 491): onCreate()... this = com.android.phone.InCallScreen@413c

8b80

D/InCallScreen( 491): - onCreate: phone state = OFFHOOK

C:\Program Files (x86)\Android Injector>

Edited by pjv1001
Link to comment
Share on other sites

Guest BiziBB

You could always cook up roms yourself... It's good he does that instead of just leaving us in the dark like some developers.

I like reading the updates on http://twitter.com/TripNRaVeR

Even when there's not a new release; it's VERY appreciated since it updates anyone interested.

While there is not a new release here, it shows that he's learning, eliminating issues, finding new ones and getting closer to a AOSP 4.03 for Sensation.

Keep up the tweets!

Link to comment
Share on other sites

Guest tunatje

Twitterrr:

RT @TripNRaVeR OMG i think i'm going to regret this but i'm to excited lolz WOW IT RUNS SOO GOOD SUPER SMOOTH what an improvement, dont dare to reboot haha

Link to comment
Share on other sites

Guest tunatje

@ twitter

RT @TripNRaVeR OMG i think i'm going to regret this but i'm to excited lolz WOW IT RUNS SOO GOOD SUPER SMOOTH what an improvement, dont dare to reboot haha

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.