Jump to content

[KERNEL] Overclock kernel


Guest Fuzzra
 Share

Recommended Posts

The difficulty there is not so much producing one as doing it with the soft keys working properly. I can't test that here, but I did have a bit of a fiddle. If you're feeling brave you can give it a whirl: vivacitytest.zip

Working well so far.

Great work Fuzzra!

Link to comment
Share on other sites

Great work mate :D

One question from me-i'm currently using

[ROM] FLB2 - Completely Debranded GB ROM r2a http://android.modac...ded-gb-rom-r2a/

Now, after flashing the rom i immediately had to flash the stock OSFII kernel because i had the problem with the out of sync touchscreen and keyboard. Was just wondering if any of the other users on here had this rom on their phone and if the sync problem returns with this kernel flash ?

Cheers in advance.

Link to comment
Share on other sites

I'm guessing you are in a small minority on that ROM. I suggest you flash Fish & Chips which has benefited from continuous support & development. Rls 4 is due this weekend - give it a try. I promise you won't be disappointed!!

Edited by Titas
Link to comment
Share on other sites

I'm guessing you are in a small minority on that ROM. I suggest you flash Fish & Chips which has benefited from continuous support & development. Rls 4 is due this weekend - give it a try. I promise you won't be disappointed!!

Thanks for the reply Titas. Decided to go ahead and try it anyway, all's working fine. No sync keyboard issues and front facing camera works fine too. Big thanks to all involved biggrin.gif

Link to comment
Share on other sites

The SFII kernel works perfectly for me.

I am overclocking to 979.2 MHz at the moment, and haven't encountered any problems.

Link to comment
Share on other sites

Try the Antutu full test miso and tell me if it crashes ;)

Do you mean set it to the highest frequency available in Antutu? I did try that at one point but it froze and rebooted. :(

At the moment I have got it set to 998.4 MHz which seems to work fine.

Link to comment
Share on other sites

No I meant try the tests at 979.2. Mine crashed at the 2D graphics test (flying androids)

Just tested mine at the same frequency. The test completed with a score of 1637. I'll try some higher frequencies.

edit: I have just run the test at 1017.6 MHz and it completed with a score of 1798. Any higher and my phone crashes instantly.

Edited by misodoctakleidist
Link to comment
Share on other sites

  • 2 months later...

Hi,

on my TMV run CM9 (19/05) and I have one question. Which CPU governor is best for battery life and performance? I overclocked to 979MHz and Antutu works fine with 2138 points . I'd like overclock/underclock between 122 and 979 MHz, but I dont know which governor is best for this.

Thanks

Link to comment
Share on other sites

  • 2 months later...
  • 2 weeks later...

The difficulty there is not so much producing one as doing it with the soft keys working properly. I can't test that here, but I did have a bit of a fiddle. If you're feeling brave you can give it a whirl: vivacitytest.zip

Does thid fix the upside down camera problem , I just tried it but it didnt work for me

Link to comment
Share on other sites

  • 2 weeks later...

flashed this on my vivacity FNC r7 but every time I install an app it reboots the phone,Fixed but tpting and reflashing rom...

anyone know why the issue mentioned?

Link to comment
Share on other sites

flashed this on my vivacity FNC r7 but every time I install an app it reboots the phone,Fixed but tpting and reflashing rom...

anyone know why the issue mentioned?

FNC7 ALREADY HAS this Kernel man.
Link to comment
Share on other sites

flashed the oc kernel for Vivacity that supposed to solve flipped camera(upside down) but no difference with stock app... AM on FNCrl7 any ideas as to why?

Link to comment
Share on other sites

flashed the oc kernel for Vivacity that supposed to solve flipped camera(upside down) but no difference with stock app... AM on FNCrl7 any ideas as to why?
Because the Kernel you flashed is for the OSFII, so basically, you just screwed your softkeys!
Link to comment
Share on other sites

  • 2 months later...

Ok, had strange results.

I flashed back from CM10 to FNC 7.1, then flashed this kernel.

Got the upside down problem so I flashed with the "flip version".

Now, when opening "Camera ICS", I can see myself good, but the result picture IS upside down lol so, what is the problem ? :(

Any idea to have both "me" and "result" same ?

Thx

EDIT : ok, solved this "problem" : I used the default camera app instead of "Camera ICS" and all is ok but now, question : is it possible to have an ICS-like camera app working normally ?

Edited by OuahOuah
Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.