Jump to content

Recommended Posts

Guest PaulOBrien
Posted

Predictably the G300 is SIM locked.

I'll have a look at unlock options...

P

Guest tilal6991
Posted

Disappointing... But expected I suppose.

Huawei phones thus far have been cheaply and easily unlocked Let's hope this is the same.

Guest Matchstick
Posted

DC-Unlockers seem to have quite a bit of experience with unlocking Huawei phones so I wouldn't be surprised to see a solution from them very soon.

Guest chaosfoevr
Posted

hope u guys r rite... went to check it out in vodafone store n it feel really good in hand...

Definitely gonna go for it, just waitin fo u guys.:P

Guest hecatae
Posted

here's a suggestion:

Download and install dc-unlocker
Download and install PSAS
Put in different network SIM into the modem, turn it on and connect to to the PC via USB
Run DC Unlocker as Administrator, then scan and make sure you can see the device. It will say locked at the bottom next to SIM status.
Run PSAS v1.15 as Administrator
In PSAS click Hardware Forensics tab, choose "Use Mobile ports"
You will be taken to the Setup tab. Set Serial Com Port to COM# - \Device\QCUSB_COM#_1 and Baud rate to 115200 (decrease it to 9600 if PSAS crashes)
Now go to PSAS DIAG tab, press the Send button and make sure that text is returned in the white box below.
Change Save Memory To File to Read EFS, change Max Page to 5000 and click Alternate Method
Click lets go. Save the file to the desktop, and once PSAS is done open it in Notepad.[/code]

I have no issue in hunting through the above file produced, if someone wants to follow these steps, to see if we can grab the unlock code via the diagnostics port.

Guest buneech
Posted

Tempted to order one to Slovenia if it can be unlocked. :)

Guest unrandomsam
Posted

here's a suggestion:

Download and install dc-unlocker

Download and install PSAS 

Put in different network SIM into the modem, turn it on and connect to to the PC via USB

Run DC Unlocker as Administrator, then scan and make sure you can see the device. It will say locked at the bottom next to SIM status.

Run PSAS v1.15 as Administrator

In PSAS click Hardware Forensics tab, choose "Use Mobile ports"

You will be taken to the Setup tab. Set Serial Com Port to COM# - \Device\QCUSB_COM#_1 and Baud rate to 115200 (decrease it to 9600 if PSAS crashes)

Now go to PSAS DIAG tab, press the Send button and make sure that text is returned in the white box below.

Change Save Memory To File to Read EFS, change Max Page to 5000 and click Alternate Method

Click lets go. Save the file to the desktop, and once PSAS is done open it in Notepad.

I have no issue in hunting through the above file produced, if someone wants to follow these steps, to see if we can grab the unlock code via the diagnostics port.

I think it is fairly likely it will say EFS read not supported.

Guest hecatae
Posted

I think it is fairly likely it will say EFS read not supported.

only one way to find out...

it's either that or QPST

Guest trueno2k
Posted (edited)

only one way to find out...

it's either that or QPST

Is anyone gonna try one of these tools to see if the methods used for the ZTE devices works with this device?... I haven't got a G300 yet, but very well tempt me if there is a method of unlocking without paying Vodaphone or any other unlocking services (just like Frankish, I'm a cheapskate :P)... I'm guessing we're gonnahave to wait for Huawei to release the original stock rom to help this method work properly?!... Look forward to seeing some progress in the next month or so :D

Edited by trueno2k
Guest roundajr2579
Posted (edited)

Hi All.

I purchased my new Huawei Ascend G300 only yesterday and applied for a unlock code as I am on the 3 network.

I received my unlock code this morning via email and now I have an unlocked handset.

The code cost me around £16 from the address below.

No messing - it just works.

http://unlockphonenetwork.com/

Some others are reporting getting working unlock codes from Ebay too?

Edited by roundajr2579

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.