bricked blade help! :(

[Guest Mrian]

Hey, so i went kind of experimental and tried to install ICS 4.0.4 xcoldfusion. I got it installed great. But then i realised i needed to partition my blade.

So i used the partition layout tool to make a 195mb system, 15mb cache 230mb data, grabbed data.img, recovery.img off my nandroid backup on the ics. And then the extra atpboothd.mbn partition.mbn from jellyfish image TPT. Shoved them all together onto my SD image folder and held up and menu to cripple my Blade.

Now i just get a red back button light.

If i push up and on it goes green.

very useful.

If i leave my sd card in the phone and push up and menu it goes to the Update from T-Card green on black background up date thing again. So i can do that.

Is my phone a goner, any advice?

Thanks in advance

maybe time to buy a new phone

ian

[Guest Amphoras]

Mixing files from different TPTs isn't a good idea unless you know exactly what you are doing. Try downloading the Gen 1 to Gen 2 v10 stock TPT from here. Unzip it to your sdcard and check the files. Once you've done that start it by holding menu and vol+ the same as before. That should fix it and then you can flash ICS again.

[Guest Mrian]

thanks for your reply. The problem is i cant load the sd in windows.. because the phone wont go into fast boot mode and windows does not recoginse the device any more. so transferring files is difficult .... im in the process of method 5 bricked solutions im jumping too far?

[Guest]

thanks for your reply. The problem is i cant load the sd in windows.. because the phone wont go into fast boot mode and windows does not recoginse the device any more. so transferring files is difficult .... im in the process of method 5 bricked solutions im jumping too far?

Take the sd card out and put it into a micro sd card reader if u hv 1 then plug it into the computer. Or u can do a search on how to do it because its possible but I cnt remember where I read how to do it.

[Guest Amphoras]

thanks for your reply. The problem is i cant load the sd in windows.. because the phone wont go into fast boot mode and windows does not recoginse the device any more. so transferring files is difficult .... im in the process of method 5 bricked solutions im jumping too far?

Yes, method 5 is jumping too far. It doesn't always work and can make things much worse. Trying using an sdcard reader if you have one, or put the sdcard in another phone or something to transfer the files. Fixing it with a TPT is much safer than using the ZTE flasher.

[Guest Mrian]

Thanks for your responses manged to get it started using method 5, didnt have any other way of accessing the micro card at 12am at night. may have been reckless but it worked thanks for your input