[ROM][ZTE Skate] CyanogenMod 7.2.0 (STABLE) - Android 2.3.7 (31/10/12)

[Guest dmitry_sensei]

1.flash to skatie1.1

2. wipe data factory caches dalvik

3. install from zip on sdcardd New s2

4. test. visibility is not changed. screen positions are still wrong

[Guest C3C0]

What app do you use to test visibility?

Is your screen OK on stock rom?

Edited September 12, 2012 by C3C0

[Guest dmitry_sensei]

<p>

What app do you use to test visibility?

Is your screen OK on stock rom?

On Stock - Visibility is ok.ZXReader - Infobar at left position :).and Screen Test from Amberfog

Edited September 12, 2012 by dmitry_sensei

[Guest C3C0]

Can you post better and bigger picture? I just can't see what the problem is...

[Guest dmitry_sensei]

where wrote 0.18% (vertical) must be 60.18%

Edited September 12, 2012 by dmitry_sensei

[Guest johnny07mdc]

Thanks C3CO for all your hard work,

making our skates even better

[Guest C3C0]

where wrote 0.18% (vertical) must be 60.18%

Strange...

Last attempt. Try this one: http://ceco.sk.eu.org/omc/GooMirror/Kernels/update-S2-boot-20120912_2.zip

If no change then I give up...

What about other applications. Are they also missing bottom part?

Can anyone else reproduce it? Could be a specific problem of your device... But really hard to say.

[Guest dmitry_sensei]

visuality now is good. thanks. i like skatie :)

proximity too good. touchscreen sensority is good.

[Guest dmitry_sensei]

many devices in Russia and CIS has the trouble with skatie release. now will not has this problem.

[Guest C3C0]

Ok. Thanks for info. I will update the kernel in skatie kitchen tomorrow. And also release new cm7.2 with updated kernel.

[Guest dmitry_sensei]

hi . when travel charger plug into switched off skate - image of green "duracell" is blinking .

[Guest dmitry_sensei]

on skatie 2.4+new S2 kernel

[Guest C3C0]

Works ok here. Tested with original charger and also usb charging from PC.

Does it happen to you all the time ?

What do you mean by "travel charger"?

[Guest dmitry_sensei]

on original charger wrote "travel charger" ;) on cm72 i didn't check charging. yesterday i "violated" my skate :D by tests so not all checked by me. imho on skatie1.1 blinking of screen and "duracell" was too.

[Guest C3C0]

I need to know if it happens on new kernel only (the one from yesterday) or also on older "Ceco S2" that's in the kitchen?

[Guest dmitry_sensei]

yes. older ceco 2 has the same.

[Guest JetKun]

Can I just flash over ia 3?

[Guest JetKun]

Can I just flash over ia 3?

[Guest dmitry_sensei]

C3C0 - blinking video at https://docs.google....MGRMLWdIcGtha2s

On Stock ROM Blinking of screen&cell was absent

Edited September 13, 2012 by dmitry_sensei

[Guest C3C0]

Blinking is not important at this time. The more important for me is to know whether you get reboots when plugging charger in.

Anyway, another version of kernel will be available soon to test.

[Guest dmitry_sensei]

ok. Plugging charger into switched on or off Skate on new S2 don't produce reboot

[Guest C3C0]

OK. Another one to try: http://ceco.sk.eu.org/omc/GooMirror/Kernels/update-S2-boot-20120913.zip

[Guest dmitry_sensei]

What to test?

Do Clean Caches?

Edited September 13, 2012 by dmitry_sensei

[Guest C3C0]

Everything :) LCD visibility, touchscreen, sensors, usb mass storage, usb charging. Also check the blinking screen when charging with device turned off if it is still there.

If it still blinks I will then try to change one parameter and post another version to test.

[Guest dmitry_sensei]

blinking screen stiil blinks :)

Visibilty is good

Proximity works correctly

Screen autorotating works

Google Maps is ok

USB storage under OpenBSD works correctly