Guest C3C0 Posted June 14, 2012 Report Share Posted June 14, 2012 Flash and test this one: http://goo.im/devs/C3C0/Kernels/update-S2-SFR-boot-20120614_2.zip Link to comment Share on other sites More sharing options...
Guest spide Posted June 14, 2012 Report Share Posted June 14, 2012 wifi it's OK thanks for your time and your job Thanks Thanks thanks! Link to comment Share on other sites More sharing options...
Guest C3C0 Posted June 14, 2012 Report Share Posted June 14, 2012 (edited) Fine. Here goes another one. This one is intended to be used with CM7 based roms (MokeeOS, CM7.2RC3) Download: http://tinyw.in/yAem Somebody should test it if it actually works... If yes then I'll build another one - for CM9 Edited June 14, 2012 by C3C0 Link to comment Share on other sites More sharing options...
Guest spide Posted June 14, 2012 Report Share Posted June 14, 2012 (edited) ok i put update with cm7? Edited June 14, 2012 by spide Link to comment Share on other sites More sharing options...
Guest spide Posted June 14, 2012 Report Share Posted June 14, 2012 With your update S3, I ve tryed with cm7.2 and MokeesOS. The screen is locked on logo Link to comment Share on other sites More sharing options...
Guest C3C0 Posted June 14, 2012 Report Share Posted June 14, 2012 Ok. I probably know the reason. Will get back to it later. Link to comment Share on other sites More sharing options...
Guest spide Posted June 14, 2012 Report Share Posted June 14, 2012 ok Link to comment Share on other sites More sharing options...
Guest C3C0 Posted June 15, 2012 Report Share Posted June 15, 2012 Please, can you try this one? With CM7 (Mokee or CM7.2) http://goo.im/devs/C3C0/Kernels/update-S3-SFR-CM7-boot-20120615.zip Link to comment Share on other sites More sharing options...
Guest spide Posted June 15, 2012 Report Share Posted June 15, 2012 I've tryed with Mokee, it's OK Link to comment Share on other sites More sharing options...
Guest C3C0 Posted June 15, 2012 Report Share Posted June 15, 2012 Ok. Thanks :) Link to comment Share on other sites More sharing options...
Guest spide Posted June 16, 2012 Report Share Posted June 16, 2012 I can release the two links on the french forum? Link to comment Share on other sites More sharing options...
Guest C3C0 Posted June 16, 2012 Report Share Posted June 16, 2012 Of course. I can also make another one - for ics (cm9) if you're interested. Link to comment Share on other sites More sharing options...
Guest SingleWolf Posted June 16, 2012 Report Share Posted June 16, 2012 Of course. I can also make another one - for ics (cm9) if you're interested. Make it please. Link to comment Share on other sites More sharing options...
Guest spide Posted June 16, 2012 Report Share Posted June 16, 2012 ok for CM9 Link to comment Share on other sites More sharing options...
Guest C3C0 Posted June 16, 2012 Report Share Posted June 16, 2012 OK. Try this one: http://goo.im/devs/C3C0/Kernels/update-S3-SFR-CM9-boot-20120616.zip Link to comment Share on other sites More sharing options...
Guest sacat Posted June 16, 2012 Report Share Posted June 16, 2012 hi C3CO, hi spide i don't have issue with touchscreen on my zte staraddict sfr. C3co i used Xmasterninni zte porting tool but BT and wifi don't work. I think this issue is because of the firmware. Could you tell me wich file you have changed in this update to make wifi works? If i change boot.img and lib/dhd.ko sometimes it works, sometimes no. can y apply your patch on my portingtool's roms? Link to comment Share on other sites More sharing options...
Guest C3C0 Posted June 16, 2012 Report Share Posted June 16, 2012 My problem was just misplaced dhd.ko. I had it inside lib/modules but it should be directly in lib. I don't think your problem is connected with kernel and dhd. I suppose it's something else. Is your ported rom available for download? I could take a look at it tomorrow maybe. Link to comment Share on other sites More sharing options...
Guest spide Posted June 17, 2012 Report Share Posted June 17, 2012 It's OK C3C0 for CM9 Link to comment Share on other sites More sharing options...
Guest SingleWolf Posted June 17, 2012 Report Share Posted June 17, 2012 (edited) Seems working OK, but have a non-zero (~5% for 9 hours) battery consumption in deepsleep (compared to "regular" S3 kernel with same installed software and device settings). Edited June 17, 2012 by SingleWolf Link to comment Share on other sites More sharing options...
Guest C3C0 Posted June 17, 2012 Report Share Posted June 17, 2012 (edited) It's not too much. Might be some app waking it regularly. If it was a permanent wakelock the consumption would be much higher. Can you check using BetterBatteryStats? Edited June 17, 2012 by C3C0 Link to comment Share on other sites More sharing options...
Guest SingleWolf Posted June 17, 2012 Report Share Posted June 17, 2012 (edited) Might be some app waking it regularly. Not sure: everything is same (ROM, software, settings), only S3 kernel replaced with SFR build. Will test more to exclude simply improper battery charge indication. Can you check using BetterBatteryStats?Yes, I already check it, but see no active kernel wakelocks. P.S. No more tweaks in it then only SFR touchscreen support added? I feel noticeable faster cold boot with this kernel. Edited June 17, 2012 by SingleWolf Link to comment Share on other sites More sharing options...
Guest spide Posted July 2, 2012 Report Share Posted July 2, 2012 Hi c3c0, i have a problem with CM9, i can't seem to remove the pointer mouse. Link to comment Share on other sites More sharing options...
Guest WAWA72 Posted August 10, 2012 Report Share Posted August 10, 2012 Hi c3c0, i have a problem with CM9, i can't seem to remove the pointer mouse. no Fix ? Link to comment Share on other sites More sharing options...
Guest C3C0 Posted August 10, 2012 Report Share Posted August 10, 2012 I tried but ran out of ideas. It's difficult for me without having this type of device physically ... Link to comment Share on other sites More sharing options...
Guest iKrautDroid Posted August 10, 2012 Report Share Posted August 10, 2012 well, I'll gloadly test anything. I also made a logcat of boot for tilal. Would that help you? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now