[ROM][ICS] Miuiv4 2.7.4 for the Huawei Ascend G300[Last updated: 04/07]

[Guest Geno.Kolar]

Instructions:

ROM

• Base on offical ICS 4.0
  
• All work good
  
• This ROM is compatible with both the U8815 and U8818 models.
  
  INSTALL OFFICAL ICS & UNLOCK PHONE
  
  backup your Imei let you can downgrade to offical gingerbread (http://www.modaco.co...m-now-possible/)
  Your must upgrade to offical ICS
  • Download the official download from the Huawei site ( http://www.huaweidev...softid=NDE4NjY= )
    
  • Unzip the file and copy the dload folder and (optional) vendor folder on to your SD card.
    
  • Go to Settings > Storage > Software upgrade to start the ICS upgrade - make sure you have enough battery before going any further!
    
  • (Optional )Flash the vendor package from the official download from the Huawei site - (this is optional but I didn't do it and my ICS works great)
    
  • Boot in to freshly installed ICS, install ADB drivers from the ISO mounted on the phone, enable USB debugging and then connect USB cable - make sure adb works.
    
  • Download Attached Files 'unlockbootloader.exe'
    
  • Ran 'unlockbootloader.exe' and clicked 'ROOT Your Phone'.
    
  • Ran 'unlockbootloader.exe' and clicked 'Unlock BOOTLOADER' - app closed on completion.
    
  • Power off your phone, remove battery for a few seconds and replace, then power on whilst holding vol. down and power to go in to fastboot - the phone will hang on the splash screen whilst in fastboot.
    
  • Then go to this thread ( http://www.modaco.co...15ascend-g-300/ ) and follow the instructions to install clockworkmod recovery.
    

  INSTALL

  [*]Grab the ROM and stick them on your SD.

  [*]Boot in to Recovery by turning the phone off, and turning it on while holding the volume up key (not volume down like a lot of phones, volume down takes you to the bootloader).

  [*]'Wipe Data/Factory Reset'

  [*]NB: I advise you reboot recovery here, CWM seems a bit broken with flashes after wipes, it seems.

  [*]'Install zip from sdcard' -> 'Choose zip from sdcard' -> ROM

  [*]'Reboot System Now'

  [*]Give it time - first boot takes longer than usual.

  [*]Run through the first time setup, language, date/time, Google account etc.

  [*]Have fun!

  Downloads:

  http://sourceforge.n....0.zip/download

  HUAWEI APP

  maybe some body need the huawei app,this can work on Miuiv4

  

  

  

  unlockbootloader.exe

Edited July 5, 2012 by Geno.Kolar

[Guest Hans Gruber]

Good work. I've never tried MIUI so I look forward to having a play with it :)

[Guest FrankieADZ]

nice :)

good to see more ICS roms heading to the G300 :D

[Guest Hpez]

Nice one. Thanks for this. :)

Edit: Oh, just for the record, when updating with the official update, there is no need to flash the vendor files. I didn't nor did most other people from what I have read.

Edited July 4, 2012 by Hpez

[Guest Dazzozo]

I recognise those instructions in the OP from somewhere... ;)

[Guest haxxbaxx]

always wanted miui on my blade, awesome that someone has done it, will try once all this gets simplified

[Guest omegamoon]

Ah, now we're talking. I'm using MIUI as my daily ROM on my Acer Liquid E and I just love it.

By the way, it's just amazing the speed of development the last day or two, it's hard to keep up the reading if you also need to work a bit now and then :P

[Guest Tec_Fil]

after use unlockbootloader.exe for root and unlock bootloader, bootloader remains locked...

[Guest FrankieADZ]

after use unlockbootloader.exe for root and unlock bootloader, bootloader remains locked...

not if u use the unlockbootloader.exe correctly according to people who have used/done it. :unsure:

[Guest Tec_Fil]

I folowed the instructions at the 1st post and now when i try to do a forced update device show me a pink screen

[Guest pumemule]

could you please make an picture from the lang settings?

I ask to know if it have hebrew(עברית)?

[Guest Tec_Fil]

to use unlockbootloader.exe device had to be in download mode or what? This isn´t specified in instructions

[Guest Hpez]

to use unlockbootloader.exe device had to be in download mode or what? This isn´t specified in instructions

To use unlockbootloader.exe you want to boot into ICS and enable USB debugging, then use the tool to root and then to unlock bootloader.

[Guest wrtease]

no .you can do it normal through usb.

[Guest FrankieADZ]

I folowed the instructions at the 1st post and now when i try to do a forced update device show me a pink screen

u need to place the ICS update.app file in a dload file on the root of ur external SD card.

[Guest Geno.Kolar]

I recognise those instructions in the OP from somewhere... ;)

I'm lazy, very easy to copy, never mind

[Guest FrankieADZ]

I'm lazy, very easy to copy, never mind

dont blame ya, think just about everyone else would have done the same(thanks btw) ;) :)

[Guest Hpez]

The upgrade instructions for ICS look a little confusing as they are missing a couple of things so I have added a few more steps to clear things up.

These are the steps I took:

• Download the official download from the Huawei site ( http://www.huaweidev...softid=NDE4NjY= )
  
• Unzip the file and copy the dload folder and (optional) vendor folder on to your SD card.
  
• Go to Settings > Storage > Software upgrade to start the ICS upgrade - make sure you have enough battery before going any further!
  
• (Optional )Flash the vendor package from the official download from the Huawei site - (this is optional but I didn't do it and my ICS works great)
  
• Boot in to freshly installed ICS, install ADB drivers from the ISO mounted on the phone, enable USB debugging and then connect USB cable - make sure adb works.
  
• Download 'unlockbootloader.exe' from http://www.mediafire...v9a6xmvz1ut832a
  
• Ran 'unlockbootloader.exe' and clicked 'ROOT Your Phone'.
  
• Ran 'unlockbootloader.exe' and clicked 'Unlock BOOTLOADER' - app closed on completion.
  
• Power off your phone, remove battery for a few seconds and replace, then power on whilst holding vol. down and power to go in to fastboot - the phone will hang on the splash screen whilst in fastboot.
  
• Then go to this thread ( http://www.modaco.co...15ascend-g-300/ ) and follow the instructions to install clockworkmod recovery.
  

Edited July 4, 2012 by Hpez

[Guest wrtease]

very good post and should be pinned for ics for new members

Edited July 4, 2012 by wrtease

[Guest Simon O]

Nice to see you here, Genokolar! I really enjoyed your work on the Huawei U8800 so I'm happy to see you with the G300.

[Guest Tec_Fil]

u need to place the ICS update.app file in a dload file on the root of ur external SD card.

done

root done and cwm installed-->wait for the end of miui rom download

[Guest ugnius40]

Noob question, if I go and install this one, will I have trouble installing Paul's mod over it, also what about CM9? And finally how about official huawei UK mod? Can someone explain this please.

[Guest Nesli]

Nice !! Anyway, could you make AOSP version with google apps flashable over official ICS ? :)

[Guest kieranswhite]

Do you Need to install Clockwork mod recovery ? Sorry I'm fairly new to this sort of thing?

[Guest kieranswhite]

Do you Need to install Clockwork mod recovery ? Sorry I'm fairly new to this sort of thing.