Jump to content

[ICS] Found U8815 B927 ROM


Recommended Posts

Guest mr_mufy
Posted

The increasing volume option hasn't reappeared in ICS B926 or B927, however in ICS the ringtone volume now starts out at its maximum so you're not forced into waiting for the ringtone volume to increase.

Ok. Thanks.

THere it's any rom ICS stable?

Guest Rico_89
Posted

Ok. Thanks.

THere it's any rom ICS stable?

B926 seemed to have less complaints than B927, although 926 is the official Chinese ICS and 927 is the demo UK/European ICS. I personally don't have any real issues running B927 but others have, read through this thread to see what problems some are having: http://www.modaco.com/topic/355984-b927-my-experience/ .

Guest andy.hyde4
Posted

I have had less issues with b927 than I did with b926

Guest Fairlight2x
Posted

I've had no problems running B927. The only issue I have (and this seems to be a Huawei thing) is I can't use long press on the volume buttons to change tracks in Poweramp. I had hoped upgrading to ICS would solve that problem.

Guest rsrocha
Posted

Has anyone managed to sync facebook contacts to the phonebook like in gb? I didnt tried the preinstalled facebook app. I updated straight after rom upgrade.

I saw some sites this is a general bug with ics/facebook.

Guest andy.hyde4
Posted

To sync Facebook get haxsync. Works perfectly and gets nice high res images

Guest ferriscat
Posted

Is the links to the rom not working? I can't seem to download it!!

Guest MickJack
Posted (edited)

Is the links to the rom not working? I can't seem to download it!!

Works for me, maybe reset your internet connection.

What about clicking on direct links:

http://www.mediafire...3gpd4vv5gzr35l9

http://www.mediafire...jgl0so0dzadss7s

from page 9, the translate thing confuses things perhaps. the 'middle' file works from the original post, you may need that. This has moved along very fast. Good luck with it.

Edited by MickJack
Guest darko sax
Posted

hi people.cen sombady post here detailes to upgrade from chinese oficial b926 to b927.i tray evry single method from here.nothing works for my.if is posible zo upgrade withaute downgreding.tnks.pls

Guest Hogweed
Posted (edited)

hi people.cen sombady post here detailes to upgrade from chinese oficial b926 to b927.i tray evry single method from here.nothing works for my.if is posible zo upgrade withaute downgreding.tnks.pls

Install with CWM over B926

Edited by Hogweed
Guest darko sax
Posted

thnks.is it tis zip full ics.end is it bugy or not.did yoz tray this zip.

Guest HuaweiAscend
Posted

There are a few threads that detail the issues that this ROM has.

Guest trablmejker
Posted

Hi guys, how smoth is ICS on G300? Did anyone have any bih issues when he/she flashed the to new rom?

Guest Konstipated Kiwi
Posted

Hi guys, how smoth is ICS on G300? Did anyone have any bih issues when he/she flashed the to new rom?

You will get a mixture of responses to that one. Some have found it laggy while others reckon it is smooth. It seems to depend on upgrade path and/or which ROMs you have used before or something. I don't think a particular factor has been identified yet. I'm sticking with B888 (Gingerbread) for now, as I can't see any compelling reason to 'upgrade' to ICS.

Guest trablmejker
Posted (edited)

So.. If its not oficial do not upgrade. Huawei is advertasing it as a device with Android 4.0 but it isnt out yet, GB can be download but ICS is no were... they must be optimising it for the device to be butter smoth.. Dont see any other reason for being late with update to ICS.. Geting the G300 next week.

Edited by trablmejker
Posted

just flashed this rom, want to root it again, but after installing Root, it is not rooted....in ES file explorer and titanium backup, I cannot get root privileges.

Also i cannot install, it says no file is found:

After successfull update, go to your sdcard and delete the "dload" folder. Rename the "vendor" folder to "dload". This will flash the vendor update part wich will activate notification toggles, new keyboard and huawei boot animation. I advise to flash this vendor update.

How to solve these 2?

Guest jgbyr
Posted

Hi, I loaded this rom yesterday. Everything seems to be ok though Titanium backup wouldn't load my apps & data. I have noticed that the calendar isn't working correctly. At first when I went into setting it kept crashing. Now if I set a reminder it doesn't work. Anyone else experience this. Thanks.

Guest zex_rad
Posted

Hi all....

F1 needed....

Cannot ROOT after this update....

Tried unlockbootloader.exe - it says

ROOT Failure,Please Check the Driver…………

In DevManager (Win 7) My g300 is Shown as ASUS Android Devices > Android Sooner Single ADB Interface.... - Is that OK....

Guest elperroderoke
Posted (edited)

It happened to me when I updated from GB to ICS. It was solved just reinstaling the drivers with the ones offered when you plug the phone once the phone is ICS (Windows explorer's window with the files inside).

That process unistall the olders and install the news drivers. Then it worked.

Regards

Edited by elperroderoke
Guest zex_rad
Posted (edited)

It happened to me when I updated from GB to ICS. It was solved just reinstaling the drivers with the ones offered when you plug the phone once the phone is ICS (Windows explorer's window with the files inside).

That process unistall the olders and install the news drivers. Then it worked.

Regards

Thanks for reply but I'm not shure I understud you....

Edited by zex_rad
Guest zex_rad
Posted (edited)

I belive it has something to do with OS, but running out of ideas...

This is what I get when run unlockbootloader.exe

post-987489-0-86043800-1343482854_thumb.

Edited by zex_rad
Guest Potatoes
Posted

I belive it has something to do with OS, but running out of ideas...

This is what I get when run unlockbootloader.exe

post-987489-0-86043800-1343482854_thumb.

1. in a admin console (start menu > accessories > command prompt (right click -> open as administrator))

2. cd to the path of unlockbootloader.exe (example: cd c:\users\zex\downloads\)

3. type unlockbootloader.exe

Guest zex_rad
Posted

1. in a admin console (start menu > accessories > command prompt (right click -> open as administrator))

2. cd to the path of unlockbootloader.exe (example: cd c:\users\zex\downloads\)

3. type unlockbootloader.exe

Nope.... unlockbootloader.exe just starts, and when I click root it sais no device found....

Tried also on W7-64bit and XP same problem...

So maybe it is not OS problem....

Also tried with G300_Handset_WinDriver, no luck either.....

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.