Jump to content

[ROM] [ICS] [B952] INFUSION [CM FEATURES] [B06]


Guest tillaz

Recommended Posts

Guest tillaz

Thanks for a super rom Tillaz.

I tried a couple of the addons.

Gtalk worked fine but the sim toolkit doesn't appear in my list of installed apps.

I tried it twice - no error messages but no show either.

i will fix this later on today, thanks for letting me know

it had a similar problem on the atomicmod thread

i used the B927 one myself(EU version i think) as it has all the google apps already installed on there. so no need to use Gapps like you would need to with the B926 one.

only problem with using B297 is that it actually has a different baseband... it dose not support HSPA: 11

meaning you will have slower downloads & upload speeds, B926 supports HSPA;11 meaning much faster.

there could be a down side to using HSPA: 11 (hspa+) you might suffer worse battery like in 4g

up side is you have much faster upload speeds

JUst tried this - lovely and fast, very nice. But no Exchange email is a killer for me, so back to stock ICS...

did you check the add-ons on first page?

if you like the rom but something is missing just ask me to make an add-on

and i will add it to first page, its no trouble & takes me two seconds

I've not seen other reports of lots of "application not responding - close/wait" messages so I guess it's just me? I've redownloaded and reflashed but it's still a big problem. Nav buttons stop responding then app close/wait dialog appears or app just crashes.

Any thoughts on what I could try?

try formatting system before installing

via clockworkmod

mounts and storage / formate system

We need.kernel dev for overclock, but tillaz has said its not him. I wouldn't know the difference tbh, I just remember him saying

i have no idea about kernel mods, sorry

any thoughts on adding the volume + wake tweak here:

http://www.modaco.co...vol-wake-tweak/

:)

i will to into it

Could tillaz add huawei all backup stock app, i did a backup of some very important messages with it, now i can't restore them. Thanks in forward :) p.s. i tried to install all backup, but it sais "Application not installed"..

yes, it will be up later on today

I had another bug... While recording a video, when i finished recording and pressed stop, the phone freezed. I had to pull out the battery and boot up again. I entered gallery, the video is there but its corrupted, i cannot open it ... Before this, i recorded 3 or 4 videos normally, so i dont know what could lock up the phone ... :)

what camera where you using?

stock camera or the ICS camera

Where is the Google video editor?

it did not work when i tried it... would not allow adding files so i removed it

i have got it half working now though... just adding video is a problem & exporting project

it will be in the next release though

3 things.

The rom is great

I cannot find the system settings in the app drawer

Which governor should I use? Unless I choose Perfomance, the phone is very laggy

its actually faster to get into the settings from the launcher or status bar in ICS

just press the menu button then settings, or pull the status bar down and press the settings icon

Link to comment
Share on other sites

Guest djuroue

I dont know how to quote, so i will answer like this.

For camera bug, i use stock camera ! Should i change to ICS camera instead ?!?!

Edit:could you share link to that camera where time lapse works :-)

Edited by djuroue
Link to comment
Share on other sites

Guest mack_

I dont know how to quote, so i will answer like this.

For camera bug, i use stock camera ! Should i change to ICS camera instead ?!?!

Edit:could you share link to that camera where time lapse works :-)

+1 that..that way we can test it and see if it works for everyone

Link to comment
Share on other sites

Guest k123456

Hi Folks, looking for help

Had Atomic GB

Installed official ICS http://www.modaco.co...l-ics-403-b926/

By baseband ver is 2030

then installed Clockwork : using link below The ClockWork menu, is blue text and says Android System Recovery (3e)

Easy CWM Recovery Installer.

Wiped Data factory reset also wiped cache partition

This is where it fails :

Installed ICS Infusion Zip using ClockWork,

I see messages :Finding update package

Opening update package

verifying update package

e: signature verification failed

e: update fail and delete temp files

formatting/cache

installation aborted

You are still on the stock recovery, you need to install Sebastians clockwork mod recovery.... If you read through the guide to install b926 you should see the files you need.

----------------------------------------------------------------------------------------------

Thanks Mack

I am trying to install Sebs ClockWork without much sucess

method 1

update.zip method

  • If you have a previous version or another recovery install, install the update.zip and restart your device.

Using Clock work instaalled on phone, try to update it aka install Sebs version,

navigate to recovery-clockwork-4.015s-hwu8815-update-sign

fails with e signature verifacation failed

method 2

fastboot

get error error: cannot load 'recovery-clockwork-4.0.1.5s-hwu8815'

Any help appreciated

currently on stock rom

403

baseband 2030

Trying to install ICS Infusion

Link to comment
Share on other sites

Guest mack_

Hi Folks, looking for help

Had Atomic GB

Installed official ICS http://www.modaco.co...l-ics-403-b926/

By baseband ver is 2030

then installed Clockwork : using link below The ClockWork menu, is blue text and says Android System Recovery (3e)

Easy CWM Recovery Installer.

Wiped Data factory reset also wiped cache partition

This is where it fails :

Installed ICS Infusion Zip using ClockWork,

I see messages :Finding update package

Opening update package

verifying update package

e: signature verification failed

e: update fail and delete temp files

formatting/cache

installation aborted

You are still on the stock recovery, you need to install Sebastians clockwork mod recovery.... If you read through the guide to install b926 you should see the files you need.

----------------------------------------------------------------------------------------------

Thanks Mack

I am trying to install Sebs ClockWork without much sucess

method 1

update.zip method

  • If you have a previous version or another recovery install, install the update.zip and restart your device.

Using Clock work instaalled on phone, try to update it aka install Sebs version,

navigate to recovery-clockwork-4.015s-hwu8815-update-sign

fails with e signature verifacation failed

method 2

fastboot

get error error: cannot load 'recovery-clockwork-4.0.1.5s-hwu8815'

Any help appreciated

currently on stock rom

403

baseband 2030

Trying to install ICS Infusion

My bad i think i know what the problem is....have you unlocked bootloader and rooted the phone properly?....

-make sure you followed Hpez's guide properly to avoid making a mistake

Link to comment
Share on other sites

Guest Fabrizioso

A few people had this problem.

Go to settings >developer options, scroll down and turn off force gpu rendering.... That should sort it.

If course I did that as proposed but this does not solve the problem.

Any more hints are welcome!

Link to comment
Share on other sites

Guest mack_

If course I did that as proposed but this does not solve the problem.

Any more hints are welcome!

Im all out ,only thing i can think of right..

@TILLAZ HELP!!!!!!!!!!!!!

Link to comment
Share on other sites

Guest Potatoes

If course I did that as proposed but this does not solve the problem.

Any more hints are welcome!

I found limiting background processes helped a lot. Settings > Developer options > At most, 4 processes. I guess it reduces the phones ability to multitask as well as it should but hey you're not going to multitask well if it's laggy anyway :P having said that I've not run into any issues running all the apps I need. Give it a try worse case it doesn't work, if it does work for you the setting does get reset back to default if you restart / shutdown your phone

Edited by Potatoes
Link to comment
Share on other sites

Guest tillaz

Hi Folks, looking for help

Had Atomic GB

Installed official ICS http://www.modaco.co...l-ics-403-b926/

By baseband ver is 2030

then installed Clockwork : using link below The ClockWork menu, is blue text and says Android System Recovery (3e)

Easy CWM Recovery Installer.

Wiped Data factory reset also wiped cache partition

This is where it fails :

Installed ICS Infusion Zip using ClockWork,

I see messages :Finding update package

Opening update package

verifying update package

e: signature verification failed

e: update fail and delete temp files

formatting/cache

installation aborted

You are still on the stock recovery, you need to install Sebastians clockwork mod recovery.... If you read through the guide to install b926 you should see the files you need.

----------------------------------------------------------------------------------------------

Thanks Mack

I am trying to install Sebs ClockWork without much sucess

method 1

update.zip method

  • If you have a previous version or another recovery install, install the update.zip and restart your device.

Using Clock work instaalled on phone, try to update it aka install Sebs version,

navigate to recovery-clockwork-4.015s-hwu8815-update-sign

fails with e signature verifacation failed

method 2

fastboot

get error error: cannot load 'recovery-clockwork-4.0.1.5s-hwu8815'

Any help appreciated

currently on stock rom

403

baseband 2030

Trying to install ICS Infusion

use this method by frankish (number 3)

http://www.modaco.com/topic/353860-help-im-new-and-i-cant-do/

Link to comment
Share on other sites

Guest kyan31

i took it from the stock nexus s rom

then made changes for it to work properly

Ok thanks. Is it actually in the rom or are you still testing it?

Link to comment
Share on other sites

Guest mack_

what is the problem ?

Problem with the rom being a bit laggy even after the 2d gpu setting is off

any suggestions on improving speed or should we just wait till the next build??

Edited by mack_
Link to comment
Share on other sites

Guest tillaz

Problem with the rom being a bit laggy even after the 2d gpu setting is off

any suggestions on improving speed or should we just wait till the next build??

its because of huawei not including UI acceleration (the openGL thing people are talking about)

Link to comment
Share on other sites

Guest mack_

its because of huawei not including UI acceleration (the openGL thing people are talking about)

oh ok, so we should wait till the official ics release before it can be fixed right?

Link to comment
Share on other sites

Guest dt_matthews

its because of huawei not including UI acceleration (the openGL thing people are talking about)

So do you think the people saying how there's is performing great are just more patient than me? I couldn't handle the lag on button presses and transitions and no fiddling in settings seem to get it quick enough for me to use as a daily driver, great functionality so far tho' dude ;)

Link to comment
Share on other sites

Guest tillaz

oh ok, so we should wait till the official ics release before it can be fixed right?

yeah, it will always be slower than gingerbread utill huawei fix this...

then i can use better tweaks for performance.

i just hope huawei hurry up and sort this out... because when i get my quad core device i wont have much time for the g300

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.